ESR spectra of AsF2−6 and SbF2−6

ESR spectra observed in γ-irradiated CsAsF₆ and CsSbF₆ matrices have been assigned to the free radicals AsF^2?₆ and SbF^2?₆ respectively. The large, isotropic central-atom hyperfine interactions and isotropic g-values of these species suggest that they possess ²A_tg ground-states in O_h symmetry. The contribution to the semi-occupied orbital of the central-atom valence s atomic orbital is ≈ 0.6, greater than in the halogen hexafluorides (≈0.4) and the chalcogen hexafluoride anions (≈ 0.5). Variation of the central-atom hyperfine interaction with temperature is interpreted in terms of a second-order Jahn-Teller effect involving a low-lying ²T_1u excited state.     

A low-cost lead-acid battery with high specific-energy

Lightweight grids for lead-acid battery grids have been prepared from acrylonitrile butadiene styrene (ABS) copolymer followed by coating with lead. Subsequently, the grids have been electrochemically coated with a conductive and corrosion-resistant layer of polyaniline. These grids are about 75% lighter than those employed in conventional lead-acid batteries. Commercial-grade 6V/3.5Ah (C₂₀-rate) lead-acid batteries have been assembled and characterized employing positive and negative plates constituting these grids. The specific energy of such a lead-acid battery is about 50 Wh/kg. The batteries can withstand fast charge-discharge duty cycles. Dedicated to Prof J Gopalakrishnan on his 62nd birthday.     

Interference of ruthenium red analogues at photosystem II of spinach thylakoids

The effect of ruthenium red analogues on several thylakoid photosynthetic activities has been investigated. RR, RV, RRPh1, RRPh2 and Ph inhibit ATP synthesis and electron flow from water to MV (basal, phosphorylating and uncoupled) as their concentration increases, thus, they act as a Hill reaction inhibitor. They inhibit uncoupled electron transport through PSII from water to DCPIP and partially from DPC to DCPIP. However, these compounds do not affect uncoupled PSI electron transport from DCPIP to MV. Therefore, the target of interaction is at the level of OEC and the span P(680) to Q(A) for RR, RRPh1 and RRPh2. Chlorophyll a fluorescence studies corroborate the already found interference sites and may affect the disconnection between chlorophyll molecules within the LHCII and/or between antennae and RCs, or decreases the exciton to reach the RC and inhibition of PSII occurs. RRPh2 is six times more active than RR. Finally, Ph inhibits electron flow interacting at the level of Q(B).     

Remarkably mild and efficient catalytic Sakurai reaction of N-alkoxycarbonylamino sulfones with allyltrimethylsilane using indium(III) chloride

The Sakurai reaction of N-alkoxycarbonylamino sulfones with allyltrimethylsilane in the presence of a catalytic amount of indium(III) chloride at room temperature produces the corresponding protected homoallylic amines in high yields.     

Synthesis and some properties of poly-(2,5-trimethylene benzimidazole) and poly-(2,5-trimethylene benzimidazole hydrochloride)

A polymer, poly(2,5-trimethylene benzimidazole), the first of a new family of nonsymmetrical polymers, was synthesized via an eight-step synthetic route. The polymer, obtained by melt polymerization, is amorphous and in its neutral form behaves as a moderate insulator. It forms 1 : 1 HCl adducts. When cast from formic acid solution, it forms 1 : 1 formic acid adducts. The acid adducts are semiconductors with resistivities in the 10⁶–10⁸ ohm-cm range. Space-charge effects are generated in the adducts as carrier mobility rises.     

Diterpenoids from cultured Erythropodium caribaeorum

The known antimitotic agent eleutherobin and the briarane diterpenoids erythrolides A and B have been isolated from cultured specimens of Erythropodium caribaeorum in amounts comparable to those reported from wild-harvested reef animals. The novel diterpenoid aquariolide A, having an unprecedented highly rearranged carbon skeleton (named aquariane), has also been found. The aquariane skeleton can be formally derived from the briarane skeleton by sequential di-pi-methane and vinyl-cyclopropane rearrangements. [structure: see text]     

Synthesis and characterization of poly(ethylene oxide-co-ethylene sulfone)s and their precursors: Poly(ethylene oxide-co-ethylene sulfide)s

Three poly(ethylene oxide-co-ethylene sulfide)s with oxygen to sulfur ratios of 2/1, 2/2, and 1/2 were prepared by phase-transfer catalyzed polycondensations of (1) sodium sulfide and 1,2-bis (2-chloroethoxy)ethane, (2) 1,2-ethanedithiol and 1,2-bis(2-chloroethoxy)ethane, and (3) 1,2-ethanedithiol and 2-chloroethyl ether, respectively. A buffered solution with pH between the pK_a of the monothiol (RSH) and the pK_a2 of the dithiol (HS–R–SH), or H₂S, was needed to obtain high molecular weight polymers, which suggests that nucleophiles transfer and react as monoanions rather than dianions. These poly(ethylene oxide-co-ethylene sulfide)s were oxidized completely to poly(ethylene oxide-co-ethylene sulfone)s using 3-chloroperoxybenzoic acid as oxidant. Both the final polymers and the precursors have regular sequenced structures and are semicrystalline. As expected, their glass transition temperatures and melting points increase and solubilities decrease with the decrease of ether oxygen to sulfur ratio. © 1994 John Wiley & Sons, Inc.     

Synthetic studies related to diketopyrrolopyrrole (DPP) pigments. Part 2: The use of esters in place of nitriles in standard DPP syntheses: Claisen-type acylations and furopyrrole intermediates

Ethyl 2-aryl-4,5-dihydro-5-oxopyrrole-3-carboxylates react with esters or acyl halides in the presence of a strong base to give 4-acyl derivatives, which exist predominantly as either E- or Z-enols. These are cyclised, either in solution at temperatures >200 °C or by microwave irradiation, to 3,6-disubstituted 1H-furo[3,4-c]pyrrolediones which, after N-protection, are convertible by reaction with primary amines into novel N,N′-disubstituted DPP derivatives.     

Synthesis of (pyridinyl)-1,2,4-triazolo[4,3-a]pyridines

Methods for the synthesis of (pyridinyl)-1,2,4-triazolo[4,3-a]pyridines were developed. The principal route to the required intermediate 2-chloropyridines was based on rearrangements of mono N-oxides of 2,2′-bipyridine, 2,3′-bipyridine, 3,3′-bipyridine, 2,4′-bipyridine and 4,4′-bipyridine with phosphorus oxychloride. Reaction of 3,3′-bipyridine 1-oxide or 2,2′-bipyridine 1-oxide with phosphorus oxychloride gave mixtures of chloro isomers. Reaction with acetic anhydride, 3,3′-bipyridine 1-oxide and 2,2′-bipyridine 1-oxide gave exclusively [3,3′-bipyridine]-2(1H)-one and [2,2′-bipyridine]-6(1H)-one, respectively. 1,2,4-Triazolo[4,3-a]pyridines with pyridinyl groups at the 5,6,7 and 8 positions were synthesized.     

Preparation of poly(methyl methacrylate) and copolymers having enhanced thermal stabilities using sucrose-based comonomers and additives

A series of methyl methacrylate polymers have been prepared containing sucrose-based crosslinkers and additives. Thermogravimetry and long-term aging studies at 200°C show that sucrose-based alkyl and allyl ethers provide unprecedented thermal stability to linear, as well as crosslinked, poly (methyl methacrylate) or PMMA. Linear PMMA and PMMA crosslinked with trimethylolpropane trimethacrylate (TMPTMA) both degrade at 284°C. PMMA containing octa-O-crotylsucrose (1 mol %) degraded at 322°C. Depending on concentration, PMMA containing octa-O-allylsucrose (0.1-1.0 mol % and higher) degraded between 334 and 354°C, and PMMA containing 1′,6,6′-trimethacryloyl-2,3,3′,4,4′-penta-O-methylsucrose (0.1-1.0 mol %) degraded between 309 and 320°C. PMMA containing (1 mol % each) sucrose-based esters, ester-ether derivatives, all degraded at or below the degradation temperature of pure PMMA. Long-term air aging studies revealed that PMMA containing penta-O-methylsucrose trimethacrylate, octa-O-allylsucrose, and octa-O-crotylsucrose did not flow or sag after heating for 24 h at 200°C, but the polymers did show yellowing. While linear and crosslinked samples of PMMA containing compounds other than sucrose ethers lost more than 50% of their original weight within 15 h at 200°C, PMMA containing sucrose-based ethers lost about 8 and 20% of their original weight after 1 and 8.5 days, respectively. Herein we propose a unique mechanism by which saccharide ethers may be imparting this unprecedented thermal stabilization to PMMA. While tertiary hydrogens alpha to oxygens in saccharide ethers are stable to chain transfer during normal polymerization temperatures, they readily chain transfer at 200°C where PMMA is unstable. Chain transfer of these hydrogens is followed by fragmentation to produce alkyl, allyl or crotyl radicals, which combine with the macroradicals and terminate depropagation. © 1995 John Wiley & Sons, Inc.