Synthesis and some properties of poly-(2,5-trimethylene benzimidazole) and poly-(2,5-trimethylene benzimidazole hydrochloride)

A polymer, poly(2,5-trimethylene benzimidazole), the first of a new family of nonsymmetrical polymers, was synthesized via an eight-step synthetic route. The polymer, obtained by melt polymerization, is amorphous and in its neutral form behaves as a moderate insulator. It forms 1 : 1 HCl adducts. When cast from formic acid solution, it forms 1 : 1 formic acid adducts. The acid adducts are semiconductors with resistivities in the 10⁶–10⁸ ohm-cm range. Space-charge effects are generated in the adducts as carrier mobility rises.     

Photophysics of ruthenium(II) complexes with 2-(2′-pyridyl) pyrimidine and 2,2′-bipyridine ligands in fluid solution

The photophysics of three complexes of the form Ru(bpy)₃₋(pypm)²⁺ (where bpy2,2′-bipyridine, pypm 2-(2′-pyridyl)pyrimidine and P=1, 2 or 3) was examined in H₂O, propylene carbonate, CH₃CN and 4:1 (v/v) C₂H₅OH---CH₃OH; comparison was made with the well-known photophysical behavior of Ru(bpy)₃²⁺. The lifetimes of the luminescent metal-to-ligand charge transfer (MLCT) excited states were determined as a function of temperature (between −103 and 90 °C, depending on the solvent), from which were extracted the rate constants for radiative and non-radiative decay and ΔE, the energy gap between the MLCT and metal-centered (MC) excited states. The results indicate that ^*Ru(bpy)₂(pypm)²⁺ decays via a higher lying MLCT state, whereas ^*Ru(pypm)₃²⁺ and ^*Ru(pypm)₂(bpy)²⁺ decay predominantly via the MC state.     

Crystal structures and voltammetric behavior of three copper(II) complexes derived from bulky Schiff bases

Three Schiff base copper(II) complexes have been prepared and characterized by elemental analysis, mass spectra, i.r., electronic spectra, _eff and X-ray crystal structures. Cyclic voltammetry studies on the complexes indicate a dependence of the cathodic potentials upon electronic effects, but independence on the solid state structure.     

Synthesis and characterization of poly(ethylene oxide-co-ethylene sulfone)s and their precursors: Poly(ethylene oxide-co-ethylene sulfide)s

Three poly(ethylene oxide-co-ethylene sulfide)s with oxygen to sulfur ratios of 2/1, 2/2, and 1/2 were prepared by phase-transfer catalyzed polycondensations of (1) sodium sulfide and 1,2-bis (2-chloroethoxy)ethane, (2) 1,2-ethanedithiol and 1,2-bis(2-chloroethoxy)ethane, and (3) 1,2-ethanedithiol and 2-chloroethyl ether, respectively. A buffered solution with pH between the pK_a of the monothiol (RSH) and the pK_a2 of the dithiol (HS–R–SH), or H₂S, was needed to obtain high molecular weight polymers, which suggests that nucleophiles transfer and react as monoanions rather than dianions. These poly(ethylene oxide-co-ethylene sulfide)s were oxidized completely to poly(ethylene oxide-co-ethylene sulfone)s using 3-chloroperoxybenzoic acid as oxidant. Both the final polymers and the precursors have regular sequenced structures and are semicrystalline. As expected, their glass transition temperatures and melting points increase and solubilities decrease with the decrease of ether oxygen to sulfur ratio. © 1994 John Wiley & Sons, Inc.     

The development of radioactive glass surrogates for fallout debris

The production of glass that emulates fallout is desired by the nuclear forensics community for training and measurement exercises. The composition of nuclear fallout is complex, with widely varying isotopic compositions (Fahey et al., Proc Natl Acad Sci USA 107(47):20207–20212, 2010; Bellucci et al., Anal Chem 85:7588–7593, 2013; Wallace et al., J Radioanal Nucl Chem, 2013; Belloni et al., J Environ Radioact 102:852–862, 2011; Freiling, Science 139:1058–1059, 1963; Science 133:1991–1999, 1961; Bunney and Sam Government Report: Naval Ordinance Laboratory, White Oak, 1971). As the gaseous cloud traverses from hotter to cooler regions of the atmosphere, the processes of condensation and nucleation entrain environmental materials, vaporized nuclear materials and fission products. The elemental and isotopic composition of the fission products is altered due to chemical fractionation (i.e. the fission product composition that would be expected from fission of the original nuclear material is altered by differences in condensation rates of the elements); the fallout may be enriched or depleted in volatile or refractory fission products. This paper describes preliminary work to synthesize, irradiate and fractionate the fission product content of irradiated particulate glass using a thermal distillation 2 h after irradiation. The glass was synthesized using a solution-based polymerization of tetraethyl orthosilicate. (Izrael, Radioactive fallout after nuclear explosions and accidents, 2002) Uranium was incorporated into the glass particulate at trace concentrations during polymerization. The particulate was subjected to a short thermal neutron irradiation then heated to 1,273 K approximately 2 h after the end of irradiation. Fission products of ^{133, 134, 135}I, ^{132, 134}Te, ¹³⁵Xe, ¹³⁸Cs and ^{91, 92}Sr were observed to be distilled from the particulate. The results of these preliminary studies are discussed.     

Enthalpies of reaction of bis(triphenylphosphine)(trans-stilbene)platinum(0) with diphenylcyclopropenone and benzocyclobutenedione

Enthalpies, ΔH(1) ?94.8 ± 6.0 and ΔH(6) ?57.1 ± 5.1 kJ mol^?1, of the following reactions have been measured calorimetrically [Pt(trans-stilbene)(PPh₃)₂](s) + dpcp(g) → (PPh₃)₂Pt(dpcb)(s) + trans-stilbene(g) (1) [Pt(trans-stilbene)(PPh₃)₂](s) + bcbd(g) → (PPh₃)₂Pt(bcpd)(s) + trans-stilbene (g) (6) where dpcp is diphenylcyclopropenone, (PPh₃)₂Pt(dpcb) is (1,1-bistriphenylphosphine)platinadiphenylcyclobutenone, (PPh₃)₂$\text{PtC(Ph)C(Ph)C}$O, bcbd is benzocyclobutene-1,2-dione and (PPh₃)₂Pt(bcpd) is (1,1-bistriphenylphosphine)platinabenzocyclopentanedione,

. It is concluded that the five-membered platinacyclo ring system in (PPh₃)₂Pt(dpcb) is not heavily strained.     

Semiconducting polymers based on charge-transfer complexes. IV. Electrical properties and structure of polymeric charge-transfer complexes

Model electron donor molecules, 10-methylphenothiazine and 4-(methylthio)anisole, and polymeric electron donors which contained these molecules on the side chains of N-acyl-substituted polyethylenimines, were complexed with the electron acceptors, dichlorodicyanoquinone (DDQ), tetracyanoquinodimethane (TCNQ), tetracyanoethylene (TCNE), and tetranitrofluorenone (TNF). The model donors formed 1:1 complexes with all the acceptors except TCNE. The polymeric donors formed amorphous complexes with DDQ, TCNQ, and TCNE. Crystalline complexes were formed with TNF which had low melting points (lower than the model complexes and the pure polymer). This is apparently due to poor lateral packing of the polymer chains. Electrical resistivities were lower for all the polymer complexes than for the corresponding model complexes. Electrical resistivity also decreased with increase in complex crystallinity. In the best case the polymer complex was two hundred times as conducting as the model. The concentration of unpaired electrons measured by EPR was nearly independent of temperature. Most of the electrons seen are trapped and do not participate in conduction. Thermal activation energies for conduction were in the range of 0.5–1.8 eV and were nearly equal for the model and corresponding polymeric complexes. Elongation of polymer complex with TCNQ by rolling produces a decrease in resistivity in the roll direction, although the complex is amorphous. This reinforces the hypothesis that conduction is parallel to the polymer backbone. A polymer–tetranitrofluorenone complex was photoconducting, though the photoconductivity was smaller than the dark conductivity at the level of illumination used. Dember and Seebeck effects indicated that the major carrier in the complex was holes.     

Mass spectrometry in cardenolide chemistry—I

The mass spectrum of penta acetyl gitoxin is reported and discussed. This cardenolide derivative has recently been the subject of extensive metabolic study. Fragmentation processes are described which account for all of the major ions. High resolution measurements, metastable peaks and mass shifts, for the propionyl derivative, are reported to establish the validity of these proposals. A brief indication of the potential value of this technique, when combined with deuteroacetylation, to metabolic studies in this field is given, along with comments on the spectra of related compounds.     

Synthesis of (pyridinyl)-1,2,4-triazolo[4,3-a]pyridines

Methods for the synthesis of (pyridinyl)-1,2,4-triazolo[4,3-a]pyridines were developed. The principal route to the required intermediate 2-chloropyridines was based on rearrangements of mono N-oxides of 2,2′-bipyridine, 2,3′-bipyridine, 3,3′-bipyridine, 2,4′-bipyridine and 4,4′-bipyridine with phosphorus oxychloride. Reaction of 3,3′-bipyridine 1-oxide or 2,2′-bipyridine 1-oxide with phosphorus oxychloride gave mixtures of chloro isomers. Reaction with acetic anhydride, 3,3′-bipyridine 1-oxide and 2,2′-bipyridine 1-oxide gave exclusively [3,3′-bipyridine]-2(1H)-one and [2,2′-bipyridine]-6(1H)-one, respectively. 1,2,4-Triazolo[4,3-a]pyridines with pyridinyl groups at the 5,6,7 and 8 positions were synthesized.