Peptaibol-Containing Extracts of Trichoderma atroviride and the Fight against Resistant Microorganisms and Cancer Cells

Fighting resistance to antibiotics and chemotherapeutics has brought bioactive peptides to the fore. Peptaibols are short α-aminoisobutyric acid-containing peptides produced by Trichoderma species. Here, we studied the production of peptaibols by Trichoderma atroviride O1 and evaluated their antibacterial and anticancer activity against drug-sensitive and multidrug-resistant bacterium and cancer cell lines. This was substantiated by an analysis of the activity of the peptaibol synthetase-encoding gene. Atroviridins, 20-residue peptaibols were detected using MALDI-TOF mass spectrometry. Gram-positive bacteria were susceptible to peptaibol-containing extracts of T. atroviride O1. A synergic effect of extract constituents was possible, and the biolo-gical activity of extracts was pronounced in/after the peak of peptaibol synthetase activity. The growth of methicillin-resistant Staphylococcus aureus was reduced to just under 10% compared to the control. The effect of peptaibol-containing extracts was strongly modulated by the lipoteichoic acid and only slightly by the horse blood serum present in the cultivation medium. Peptaibol-containing extracts affected the proliferation of human breast cancer and human ovarian cancer cell lines in a 2D model, including the multidrug-resistant sublines. The peptaibols influenced the size and compactness of the cell lines in a 3D model. Our findings indicate the molecular basis of peptaibol production in T. atroviride O1 and the potential of its peptaibol-containing extracts as antimicrobial/anticancer agents.     

Effect of Titanium on Fluxional Behavior of Unbridged Metallocene Catalysts

Summary: Thanks to the use of a ligand consisting of a saturated ring fused to the cyclopentadienyl moiety, which sensibly increases the stability of titanocenes, it was possible to investigate the oscillating behavior of titanium catalysts in propylene polymerization for the first time. The titanium‐based catalysts yield poly(propylene)s with new and interesting microstructures. Indeed, in spite of the significantly lower isotactic pentad content [mmmm], the average lengths of the isotactic blocks (N_iso) are similar or even higher than that obtained with the zirconium‐based homologues. Accordingly, differential scanning calorimetry (DSC) analysis shows melting peaks which are more evident than those obtained with the zirconium homologues. The study of the microstructure of the poly(propylene)s obtained with these catalysts allowed us to participate in the still open discussion on the oscillating mechanism of unbridged metallocenes.

The titanium‐based catalysts employed in this study.     

The synthesis of methyl 2-(benzyloxycarbonyl)amino-3-dimethylaminopropenoate. The synthesis of trisubstituted pyrroles, 3-amino-2H-pyran-2-ones,fused 2H-pyran-2-ones and 4H-pyridin-4-ones

Methyl 2-(benzyloxycarbonyl)aimno-3-dimemylaminopropenoate ( 2 ) was prepared from methyl N-(benzyloxycarbonyl)glycinate ( 1 ) and t-butoxybis(dimethylamino)methane, and used as a reagent for preparation of substituted 3-(benzyloxycarbonyl)amino-4H-quinolizin-4-ones 5 and 6 , ?2H-pyran-2-ones 17–19 , ?2H-1-benzopyran-2-ones 28–31 , and -naphthopyrans 32–35 , ?2H-pyrano[3,2-c]pyridine-2,5-dione 46 , -pyrano-[4,3-b]pyran-2,5-dione 47 , -pyrano[3,2-c]benzopyran-2,5-dione 48 , -pyrano[2,3-c]pyrazol-6-ones 49 and 50 , -pyrano[2,3-d]pyrirnidin-7-ones 51 and 52 derivatives. In the reaction of 2 with 1,3-diketones trisubsti tuted pyrroles 14–16 were formed. Selective removal of benzyloxycarbonyl group was achieved by cat alytic transfer hydrogenation with Pd/C in the presence of cyclohexene to afford free 3-amino compounds 7 , 8 , 20 , 36–38 and 53–57 in yields better than 80%.     

Comparison of polyelectrolyte multilayers built up with polydiallyldimethylammonium chloride and poly(ethyleneimine) from salt-free solutions by in-situ surface plasmon resonance measurements

Polyelectrolytes offer a widespread potential for the defined modification of planar inorganic or polymer surfaces. Essential parameters for the regular adsorption of subsequent polymer layers by electrostatic interactions are the charge of polyelectrolyte and of the outermost surface region, the surface of the substrate, and the molar mass of the polyelectrolyte. To study such effects in mono- and multilayers we used poly(diallyldimethylammonium chloride (PD) with a molar mass from 5000 to 400000 g/mol as a strong polycation and poly(ethyleneimine) (PEI) with 75000 g/mol as a weak polycation and poly(sodium styrenesulfonate) (PSS) from 70000 to 1Mio g/mol in the diluted and semi-diluted region. The characterization of the layers was performed by streaming potential, in-situ SPR and UV-Vis spectroscopy. Thereby the layer built up at the solid/liquid-interface could be followed and quantified at the molecular level. SPR revealed that the thicknesses of the multilayer depends strongly on pK values of the polyelectrolyte (strong or weak) and the molar masses. We observed a linear growth if both polyelectrolytes are strong and an exponential growth if one polyelectrolyte is weak. The thickness increased with higher molar masses of the polyelectrolytes. The process was followed in-situ in short time steps.     

Matrices for mono-material composites (MMC). The case of poly(ethylene terephthalate)

The use of the same thermoplastic polymer for both the matrix and the filler in the preparation of composites is very attractive, because such composites are in principle fully recyclable. Recently it has been reported the preparation of a mono-material composite (MMC) made of polypropylene to be used in automobile parts. In this work we report on the preparation and characterization of matrices for quasi MMC made of poly(ethylene terephthalate) (PET). Particularly we found PET copolymers containing isophthalate (IPA) units adequate to be used as matrix.     

Surface modification by self-assembled polycation/azo dye multilayers

The formation and stability of some polycation/azo dye multilayers by the alternate adsorption of one polycation of integral type having 95 mol% of N,N-dimethyl-2-hydroxypropyleneammonium chloride repeat units (PCA₅) and four multicharged azo dyes: Crocein Scralet MOO (CSMOO), Ponceau SS (PSS), Direct Blue 1 (DB 1) and Direct Red 80 (DR 80) are discussed in this paper. The dyes were different either by the number of sulfonic groups (PSS, DB 1 and DR 80) or by their position (CSMOO and PSS). The multilayer growth, when PCA₅ was adsorbed from 0.2 M Na₂SO₄ aqueous solution, was followed by UV-Vis spectroscopy and by electrokinetic measurements. Solid state polycation/azo dye complexes were also prepared to get qualitative information on the charge compensation in the multilayers.     

1,3‐Dipolar Cycloadditions to (5Z)‐1‐Acyl‐5‐(cyanomethylidene)‐ imidazolidine‐2,4‐diones: Synthesis and Transformations of Spirohydantoin Derivatives

Cycloadditions of various 1,3‐dipoles to (5Z)‐1‐acyl‐5‐(cyanomethylidene)‐3‐methylimidazolidine‐2,4‐diones 8 or 9 , prepared in 3 steps from hydantoin ( 1 ) (Schemes 1 and 2), were studied. In all cases, reactions proceeded regio‐ and stereoselectively. The type of product depended on the 1,3‐dipole and/or dipolarophile employed as well as on reaction conditions. Thus, with stable dipoles under neutral conditions, spirohydantoin derivatives 12 – 16 were obtained (Scheme 2), while under basic or acidic conditions, pyrazole‐ or isoxazole‐5‐carboxamides 18 and 23 – 26 and carboxylate 27 were formed via aromatization of the newly formed dihydroazole ring, followed by the simultaneous cleavage of the hydantoin ring (Schemes 3 – 5).     

Antimicrobial and Anticancer Application of Silver(I) Dipeptide Complexes

Three silver(I) dipeptide complexes [Ag(GlyGly)]_n(NO₃)_n (AgGlyGly), [Ag₂(GlyAla)(NO₃)₂]_n (AgGlyAla) and [Ag₂(HGlyAsp)(NO₃)]_n (AgGlyAsp) were prepared, investigated and characterized by vibrational spectroscopy (mid-IR), elemental and thermogravimetric analysis and mass spectrometry. For AgGlyGly, X-ray crystallography was also performed. Their stability in biological testing media was verified by time-dependent NMR measurements. Their in vitro antimicrobial activity was evaluated against selected pathogenic microorganisms. Moreover, the influence of silver(I) dipeptide complexes on microbial film formation was described. Further, the cytotoxicity of the complexes against selected cancer cells (BLM, MDA-MB-231, HeLa, HCT116, MCF-7 and Jurkat) and fibroblasts (BJ-5ta) using a colorimetric MTS assay was tested, and the selectivity index (SI) was identified. The mechanism of action of Ag(I) dipeptide complexes was elucidated and discussed by the study in terms of their binding affinity toward the CT DNA, the ability to cleave the DNA and the ability to influence numbers of cells within each cell cycle phase. The new silver(I) dipeptide complexes are able to bind into DNA by noncovalent interaction, and the topoisomerase I inhibition study showed that the studied complexes inhibit its activity at a concentration of 15 μM.     

Molecular Suppression of the Pimerization of Viologens (=4,4′‐Bipyridinium Derivatives) Attached to Nanocrystalline Titanium Dioxide Thin‐Film Electrodes

Twelve viologens, i.e., 4,4′‐bipyridinium derivatives 1 – 12 , were examined for their use as electrochromic material when attached to nanocrystalline titanium dioxide thin‐film electrodes. Eight of these ( 1 – 4 , 7 – 8 , 10 , and 12 ) are new, and their synthesis is included. The modifier compounds consist of one to four bipyridinium subunits with linear or dendritic architecture, equipped with one to three TiO₂‐anchoring phosphonate groups. They are tailored for high electrochromic dynamics (large absorbance change upon reduction) and low extent of pimerization (=charge‐transfer (CT) complexation of viologen cation radicals). A new graphical method is presented for the discrimination of simple dilution phenomena and more complex structural effects on the extent of pimerization in the surface‐attached viologen layer.