稠杂环化合物的研究（XV）──6－取代－3－（1H－苯并三唑－1－亚甲基）－1，2，4－三唑并［3，4－b］－1，3，4－噻二唑的合成

研究了３－（１Ｈ－苯并三唑－１－亚甲基）－４－氨基－５－巯基－１，２，４－三唑与取代苯甲酸在三氯氧磷催化下的反应，制得１０种新的３－（１Ｈ－苯并三唑－１－亚甲基）－１，２，４．三唑并［３，４－ｂ］－１，３，４－噻二唑，通过元素分析、ＩＲ、￣１ＮＭＲ和ＭＳ确证了它们的结构并讨论了其波谱性质。     

Synthesis and structure of the incomplete cuboidal clusters [W3Se4H3(dmpe)3]+, [W3Se4H(3-x)(OH)x(dmpe)3]+ and [W3Se4(OH)3(dmpe)3]+, and the mechanism of the acid-assisted substitution of the coordinated hydrides

The novel incomplete cuboidal cluster [W3Se4H3(dmpe)3](PF6), [1](PF6), has been prepared by reduction of [W3Se4Br3(dmpe)3](PF6) with LiBH4 in THF solution. The trihydroxo complex [W3Se4(OH)3(dmpe)3](PF6), [2](PF6), was obtained by reacting [W3Se4Br3(dmpe)3](PF6) with NaOH in MeCN-H2O solution. The complexes [1](PF6) and [2](PF6) were converted to their BPh4- salts by treatment with NaBPh4. Recrystallisation of [1](BPh4) in the presence of traces of water affords the mixed dihydride hydroxo complex [W3Se4H2(OH)(dmpe)3](BPh4). The crystal structures of [1](BPh4), [2](BPh4) and [W3Se4H2(OH)(dmpe)3](BPh4) have been resolved. Although the [1]+ trihydride does not react with an excess of halide salts, reaction with HX leads to [W3Se4X3(dmpe)3]+ (X = Cl, Br). The kinetics of this reaction has been studied at 25 degrees C in MeCN-H2O solution (1:1, v/v) and found to occur with two consecutive kinetic steps. The first step is independent of the nature and concentration of the X(-) anion but shows a first order dependence on the concentration of acid (k1 = 12.0 mol(-1) dm(3) s(-1)), whereas the second one is independent of the nature and concentration of both the acid and added salts (k2 = 0.024 s(-1)). In contrast, the reaction of [2]+ with acids occurs in a single step with kobs = 0.63 s(-1)(HCl) and 0.17 s(-1)(HBr). These kinetic results are discussed on the basis of the mechanism previously proposed for the reactions of the analogous [W3S4H3(dmpe)3]+ cluster, with special emphasis on the effects caused by the change of S by Se on the rate constants for the different processes involved.     

A High－efficiency Preparation, Properties and Structure of （R, S ）－and （ S, S）－Pyrrolidine－2－carboxylic Acid 3,5－Dioxa－4－boracvclo.hepta [ 2,1－α; 3,4－α′] dinaphthalen－4－yl Esters

A highly-efficient preparative procedure for ( R, S )- and ( S, S)-pyrroHdine-2-carboxyHc acid 3,5-dioxa-4-boracyclohepta[2, 1-α ; 3,4-α′] dlnaphthalen-4-yl esters [ namely ( R, S )-BNBAP and (S, S )-BNBAP] is described and the crystal structure of (R, S )-BNBAP was obtained. The data indicate that ( R, S )-BNBAP is a spirocyclic inner borate salt with almost normal te-trahedral configuration. This structural form may be the basic reason for their high chemical, optical and thermodynamic sta-bility.     

Stabilization of γ‘ phase in Bi<Subscript>4</Subscript>V<Subscript>2-x</Subscript>Fe<Subscript>x</Subscript><Superscript>II</Superscript>O<Subscript>11-1.5x</Subscript> series

Summary This work reports the room-temperature stabilization of the Bi₄V_2-xFe_x^IIO_11-1.5x γ ‘ phase, a promising ionic conductive material that finds application in solid oxide fuel cell and oxygen sensor devices. The Fe(II) cation proved to be a better stabilizer than Fe(III), which was previously used, since a lower substitution degree of V⁵⁺ is needed for the former. Powder X-ray diffraction, Fourier-transform infrared spectroscopy and differential scanning calorimetry were used in these experiments.     

Spectrometric study ofα-methylene aromatic araminenone and aminoketone

Thirteenα-methylene aromatic araminenone and fourα-methylene aromatic aminoketones were prepared by modified Mannich reaction.On the basis of isotopic labeling,a plausible way of cleavage was proposed for the formation of the M~ -17 fragment peak in the MS of theα-methylene aromatic araminenone and aminoketones.The characteristic chemical shift of the olefinic protons in ~1H NMR is also discussed.     

Effect of Alkali Treatment on the Structure and Catalytic Properties of ZSM-5 Zeolite

Catalytic properties of ZSM-5 zeolite samples pretreated with NaOH solution have been investigated. The samples are characterized by XRD, SEM, chemical analysis, and N2 adsorption.The results indicate that mesopores are created in ZSM-5 crystals under alkali treatment without change the microporous structure and acidic strength of the zeolite, but the crystallinity is greatly decreased under severe treatment. IR indicates that the concentration of silanol is greatly enriched by alkali treatment. The etherification activities of ZSM-5 zeolites are greatly increased byalkali-treatment. The noticeably improved catalytic activity of treated samples is ascribed to the formation of mesopores and greatly enriched silanol group.     

C-H activations at iridium(I) square-planar complexes promoted by a fifth ligand

In the presence of ligands such as acetonitrile, ethylene, or propylene, the Ir(I) complex [Ir(1,2,5,6-eta-C8H12)(NCMe)(PMe3)]BF4 (1) transforms into the Ir(III) derivatives [Ir(1-kappa-4,5,6-eta-C8H12)(NCMe)(L)(PMe3)]BF4 (L = NCMe, 2; eta2-C2H4, 3; eta2-C3H6, 4), respectively, through a sequence of C-H oxidative addition and insertion elementary steps. The rate of this transformation depends on the nature of L and, in the case of NCMe, the pseudo-first-order rate constants display a dependence upon ligand concentration suggesting the formation of five-coordinate reaction intermediates. A similar reaction between 1 and vinyl acetate affords the Ir(III) complex [Ir(1-kappa-4,5,6-eta-C8H12){kappa-O-eta2-OC(Me)OC2H3}(PMe3)]BF4 (7) via the isolable five-coordinate Ir(I) compound [Ir(1,2,5,6-eta-C8H12){kappa-O-eta2-OC(Me)OC2H3}(PMe3)]BF4 (6). DFT (B3LYP) calculations in model complexes show that reactions initiated by acetonitrile or ethylene five-coordinate adducts involve C-H oxidative addition transition states of lower energy than that found in the absence of these ligands. Key species in these ligand-assisted transformations are the distorted (nonsquare-planar) intermediates preceding the intramolecular C-H oxidative addition step, which are generated after release of one cyclooctadiene double bond from the five-coordinate species. The feasibility of this mechanism is also investigated for complexes [IrCl(L)(PiPr3)2] (L = eta2-C2H4, 27; eta2-C3H6, 28). In the presence of NCMe, these complexes afford the C-H activation products [IrClH(CH=CHR)(NCMe)(PiPr3)2] (R = H, 29; Me, 30) via the common cyclometalated intermediate [IrClH{kappa-P,C-P(iPr)2CH(CH3)CH2}(NCMe)(PiPr3)] (31). The most effective C-H oxidative addition mechanism seems to involve three-coordinate intermediates generated by photochemical release of the alkene ligand. However, in the absence of light, the reaction rates display dependences upon NCMe concentration again indicating the intermediacy of five-coordinate acetonitrile adducts.     

Two Intercalation Mechanisms of Oxazole Yellow Dimer (YOYO-1) into DNA

The oxazole yellow dye, YOYO-1 (a symmetric homodimer), is a commonly used molecule for staining DNA. We applied the brightness analysis to study the intercalation of YOYO-1 into the DNA. We distinguished two binding modes of the dye to dsDNA: mono-intercalation and bis-intercalation. Bis-intercalation consists of two consecutive mono-intercalation steps, characterised by two distinct equilibrium constants (with the average number of base pair per binding site equals 3.5): K1=3.36±0.43×107M−1 and K2=1.90±0.61×105M−1, respectively. Mono-intercalation dominates at high concentrations of YOYO-1. Bis-intercalation occurs at low concentrations.     

Subsolidus phase diagram of Cu2OCuOMoO3 system

Five chemical compounds, CuMoO₄, Cu₃Mo₂O₉, Cu₂Mo₃O₁₀, Cu₆Mo₄O₁₅, and Cu_4?x Mo₃O₁₂ (0.10 ? x ? 0.40), were identified in the system Cu₂OCuOMoO₃ and characterized by DTA, X-ray powder patterns, ir spectra, and magnetic properties. Cupric molybdates CuMoO₄ and Cu₃Mo₂O₉ are stable in air up to 820 and 855°C, respectively, melting at these temperatures with simultaneous decomposition (oxygen loss). Congruent mp of cuprous molybdates Cu₂Mo₃O₁₀ and Cu₆Mo₄O₁₅, in argon, are 532 and 466°C, respectively. Nonstoichiometric phase Cu_4?x Mo₃O₁₂ = Cu²⁺₃Cu⁰_1?xMo⁶⁺₃O₁₂, melts in argon between 630 and 650°C depending on the value of x and at 525–530°C undergoes polymorphic transformation. Areas of coexistence of the above-mentioned phases are determined. The μ_eff of Cu²⁺ ions and θ values are: 1.80 B.M. and 28°K for CuMoO₄, 1.71 B.M. and ? 12°K for Cu₃Mo₂O₉, and 1.74 B.M. and ? 93°K for Cu_4?xMo₃O₁₂. Below 200°K CuMoO₄ becomes antiferromagnetic. Cu₂Mo₃O₁₀ and Cu₆Mo₄O₁₅ show weak temperature-independent paramagnetism.     

Synthesis,structure and catalytic polymerization activity of half‐sandwich cyclometallated iridium complexes

A series of mononuclear half‐sandwich cyclometallated iridium complexes with Schiff base ligands were synthesized in good yields. Five air‐stable C,N‐chelate mode complexes were obtained smoothly through metal‐mediated C─H bond activation. Treatments of dimeric metal complexes [Cp*IrCl₂]₂ with ligands L1–L5 afforded the corresponding C,N‐chelate mononuclear half‐sandwich iridium(III) complexes 1 – 5 . These iridium complexes exhibit high catalytic activity for norbornene polymerization. Both steric and electronic effects of the substituted groups have influences on the behaviors of the polymerization process. All complexes were characterized using infrared and NMR spectroscopies and elemental analysis. Molecular structures of complexes 1 , 2 and 5 were further confirmed using single‐crystal X‐ray analysis.