Validation of a novel method to identify in utero ethanol exposure: simultaneous meconium extraction of fatty acid ethyl esters,ethyl glucuronide,and ethyl sulfate followed by LC-MS/MS quantification

Presence of fatty acid ethyl esters (FAEE), ethyl glucuronide (EtG), and ethyl sulfate (EtS) in meconium, the first neonatal feces, identifies maternal alcohol consumption during pregnancy. Current meconium alcohol marker assays require separate analyses for FAEE and EtG/EtS. We describe development and validation of the first quantitative liquid chromatography tandem mass spectrometry assay for 9 FAEEs, EtG, and EtS in 100 mg meconium. For the first time, these alcohol markers are analyzed in the same meconium aliquot, enabling comparison of the efficiency of gestational ethanol exposure detection. 100 mg meconium was homogenized in methanol and centrifuged. The supernatant was divided, and applied to two different solid phase extraction columns for optimized analyte recovery. Limits of quantification for ethyl laurate, myristate, linolenate, palmitoleate, arachidonate, linoleate, palmitate, oleate, and stearate ranged from 25–50 ng/g, with calibration curves to 2,500–5,000 ng/g. EtG and EtS linear dynamic ranges were 5–1,000 and 2.5–500 ng/g, respectively. Mean bias and between-day imprecision were <15 %. Extraction efficiencies were 51.2–96.5 %. Matrix effects ranged from ?84.7 to 16.0 %, but were compensated for by matched deuterated internal standards when available. All analytes were stable (within ±20 % change from baseline) in 3 authentic positive specimens, analyzed in triplicate, after 3 freeze/thaw cycles (?20 °C). Authentic EtG and EtS also were stable after 12 h at room temperature and 72 h at 4 °C; some FAEE showed instability under these conditions, although there was large inter-subject variability. This novel method accurately detects multiple alcohol meconium markers and enables comparison of markers for maternal alcohol consumption.

A novel approach to measure isotope ratios via multi-collector—inductively coupled plasma—mass spectrometry based on sample mixing with a non-enriched standard

In this work, a novel approach to measure isotope ratios via multi-collector—inductively coupled plasma—mass spectrometry (MC-ICP-MS) for low amounts of target element is proposed. The methodology is based on mixing of the sample (target element isolate) with a non-enriched in-house standard, previously characterized for its isotopic composition. This methodology has been applied to isotopic analysis of Cu and of Fe in whole blood samples. For this purpose, different mixtures of sample + in-house standard were prepared and adjusted to a final concentration of 500 μg/L of the target elements for isotopic analysis. δ⁶⁵Cu, δ⁵⁶Fe, and δ⁵⁷Fe varied linearly as a function of the amount of in-house standard (or of sample) present in the mixture. The isotopic composition of the sample was calculated considering the isotope ratios measured for (i) the mixture and (ii) the in-house standard and (iii) the relative concentrations of target element contributed by the sample and the standard to the mixture, respectively. For validation purposes, the isotopic analysis of whole blood Cu was carried out using both the conventional (using 2 mL of whole blood) and the newly developed approach (using 500 μL of whole blood). The δ⁶⁵Cu values obtained using mixtures containing 40 % (200 μg/L) of Cu from the blood samples and 60 % (300 μg/L) of Cu from the in-house standard were in good agreement with the δ⁶⁵Cu value obtained using the conventional approach (bias ≤0.15?‰).     

A validated stability-indicating LC method for simultaneous determination of quinapril and hydrochlorothiazide in pharmaceutical samples

A stability-indicating liquid chromatographic method was developed and validated for simultaneous determination of quinapril and hydrochlorothiazide in drug substances and dosage forms. Chromatographic separation of quinapril, hydrochlorothiazide and its degradation products was achieved on a RP-18 column, using acetonitrile and phosphate buffer (pH 4.6) as mobile phase in a gradient mode and detection at 216 nm. Stress testing was performed under hydrolytic, oxidative, thermal and photolytic conditions. The degradation products were well resolved from main peaks, proving the stability-indicating power of the method. The assay was linear for quinapril and hydrochlorothiazide concentrations of 40–200 µg mL^?1 and 25–125 µg mL^?1, respectively. The developed method was selective, accurate and precise for quinapril and hydrochlorothiazide determination. This method was used to quantify both drugs in combined commercial tablets. The results showed that the proposed method was found to be suitable for quantitative determination and the stability study of quinapril and hydrochlorothiazide in pharmaceutical samples.      

Tacrines as Therapeutic Agents for Alzheimer's Disease. V. Recent Developments

Herein we have reviewed our recent developments for the identification of new tacrine analogues for Alzheimer's disease (AD) therapy. Tacrine, the first cholinesterase inhibitor approved for AD treatment, did not stop the progression of AD, producing only some cognitive improvements, but exhibited secondary effects mainly due to its hepatotoxicity. Thus, the drug was withdrawn from the clinics administration. Since then, many publications have described non‐hepatotoxic tacrines, and in addition, important efforts have been made to design multitarget tacrines by combining their cholinesterase inhibition profile with the modulation of other biological targets involved in AD.     

Two Ecdysteroids Isolated from Micropropagated Lychnis flos-cuculi and the Biological Activity of Plant Material

Genetically uniform plant material, derived from Lychnis flos-cuculi propagated in vitro, was used for the isolation of 20-hydroxyecdysone and polypodine B and subjected to an evaluation of the antifungal and antiamoebic activity. The activity of 80% aqueous methanolic extracts, their fractions, and isolated ecdysteroids were studied against pathogenic Acanthamoeba castellani. Additionally, a Microtox^® acute toxicity assay was performed. It was found that an 80% methanolic fraction of root extract exerts the most potent amoebicidal activity at IC₅₀ of 0.06 mg/mL at the 3rd day of treatment. Both ecdysteroids show comparable activity at IC₅₀ of 0.07 mg/mL. The acute toxicity of 80% fractions at similar concentrations is significantly higher than that of 40% fractions. Crude extracts exhibited moderate antifungal activity, with a minimum inhibitory concentration (MIC) within the range of 1.25–2.5 mg/mL. To the best of our knowledge, the present report is the first to show the biological activity of L. flos-cuculi in terms of the antifungal and antiamoebic activities and acute toxicity. It is also the first isolation of the main ecdysteroids from L. flos-cuculi micropropagated, ecdysteroid-rich plant material.     

2- and 2,7-Substituted para-N-Methylpyridinium Pyrenes: Syntheses,Molecular and Electronic Structures,Photophysical, Electrochemical,and Spectroelectrochemical Properties and Binding to Double-Stranded (ds) DNA

Two N-methylpyridinium compounds and analogous N-protonated salts of 2- and 2,7-substituted 4-pyridyl-pyrene compounds were synthesised and their crystal structures, photophysical properties both in solution and in the solid state, electrochemical and spectroelectrochemical properties were studied. Upon methylation or protonation, the emission maxima are significantly bathochromically shifted compared to the neutral compounds, although the absorption maxima remain almost unchanged. As a result, the cationic compounds show very large apparent Stokes shifts of up to 7200 cm⁻¹. The N-methylpyridinium compounds have a single reduction at ca. −1.5 V vs. Fc/Fc⁺ in MeCN. While the reduction process was reversible for the 2,7-disubstituted compound, it was irreversible for the mono-substituted one. Experimental findings are complemented by DFT and TD-DFT calculations. Furthermore, the N-methylpyridinium compounds show strong interactions with calf thymus (ct)-DNA, presumably by intercalation, which paves the way for further applications of these multi-functional compounds as potential DNA-bioactive agents.     

The mass spectrometric study on aminohydroxamic acids‐based metallacrowns

Electrospray ionization mass spectrometry (MS) has been widely used to detect noncovalent interactions in supramolecular compounds, especially in biological systems. In our work, we present the application of the electrospray ionization MS technique to characterize the metallamacrocycles, known as metallacrowns. This project involves investigations of the aminohydroxamic acids structure and chirality influence on formation of ternary 12‐metallacrown‐4 complexes. For our experiments, we used a series of β‐aminohydroxamic acids and derivatives of histidinehydroxamic acid. A high stability of the studied supramolecular systems in the gas phase was confirmed by MS/MS experiments. We also proposed the fragmentation pathways for the studied compounds. Obtained results reveal that the ternary 12‐metallacrown‐4 formation process is not selective, and ligands of various structures and chiralities can be incorporated into these systems. Copyright © 2014 John Wiley & Sons, Ltd.     

Mono‐ and Bis(pyrrolo)tetrathiafulvalene Derivatives Tethered to C60: Synthesis,Photophysical Studies,and Self‐Assembled Monolayers

A series of mono‐ (MPTTF) and bis(pyrrolo)tetrathiafulvalene (BPTTF) derivatives tethered to one or two C₆₀ moieties was synthesized and characterized. The synthetic strategy for these dumbbell‐shaped compounds was based on a 1,3‐dipolar cycloaddition reaction between aldehyde‐functionalized MPTTF/BPTTF derivatives, two different tailor‐made amino acids, and C₆₀. Electronic communication between the MPTTF/BPTTF units and the C₆₀ moieties was studied by a variety of techniques including cyclic voltammetry and absorption spectroscopy. These solution‐based studies indicated no observable electronic communication between the MPTTF/BPTTF units and the C₆₀ moieties. In addition, femtosecond and nanosecond transient absorption spectroscopy revealed, rather surprisingly, that no charge transfer from the MPTTF/BPTTF units to the C₆₀ moieties takes place on excitation of the fullerene moiety. Finally, it was shown that the MPTTF–C₆₀ and C₆₀–BPTTF‐C₆₀ dyad and triad molecules formed self‐assembled monolayers on a Au(111) surface by anchoring to C₆₀.     

SIMS accurate determination of matrix composition of topological crystalline insulator material Pb1 − xSnxSe

Substitutional alloy Pb_1 − xSn_xSe is a new class of electronic materials called topological crystalline insulators, which at the temperature range from 0 K to 300 K exhibit topological state at compositions in the range 0.18 < x < 0.40 (in the rock-salt structure). In this report, we present a secondary ion mass spectrometry (SIMS) analysis technique to provide accurate Pb and Sn composition based on the measurement of PbCs⁺ and SnCs⁺ cluster ions intensities. Studies of Pb_1 − xSn_xSe bulk samples with various values of x show that x/(1 − x) is linear in relation to the intensity ratio of PbCs⁺/SnCs⁺ over the range from x = 0.15 to x = 0.41. This technique allows us to obtain an accurate Sn content for multilayered heterostructures, quantum wells containing Pb_1 − xSn_xSe with different x values for each layer.     

Chemical promenades: Exploring potential-energy surfaces with immersive virtual reality

The virtual-reality framework AVATAR (Advanced Virtual Approach to Topological Analysis of Reactivity) for the immersive exploration of potential-energy landscapes is presented. AVATAR is based on modern consumer-grade virtual-reality technology and builds on two key concepts: (a) the reduction of the dimensionality of the potential-energy surface to two process-tailored, physically meaningful generalized coordinates, and (b) the analogy between the evolution of a chemical process and a pathway through valleys (potential wells) and mountain passes (saddle points) of the associated potential energy landscape. Examples including the discovery of competitive reaction paths in simple A + BC collisional systems and the interconversion between conformers in ring-puckering motions of flexible rings highlight the innovation potential that augmented and virtual reality convey for teaching, training, and supporting research in chemistry.