Luminance adaptation model for increasing the dynamic range of an imaging system based on a CCD camera

We propose a luminance adaptation model (LAM) to increase the dynamic range of an imaging system when scenes containing areas of low and high illumination are imaged. The LAM that we developed is based on capturing images at different exposure times to obtain digital levels within the linear response zone for all the pixels in the image. The levels are subsequently transformed to a reference exposure time that is common to all pixels. We use a linear transformation whose coefficients are determined by the digital levels obtained for a set of flat-spectrum samples. In this study, the LAM is applied to a multispectral imaging system that is based on a CCD camera used for color measurements and spectral reconstructions. It is shown to be a very useful method for increasing the dynamic range of the system, whilst maintaining its accuracy.     

Raman spectroscopic probing of plant material using SERS

We report surface‐enhanced Raman studies on intact plant material using onion layers as a biological target, and silver nanoaggregates and silver island films as enhancing plasmonic structures. Surface‐enhanced Raman scattering (SERS) enhancement allows the detection of strong Raman signatures of chemical constituents of the surface of the onion layer such as cellulose, proteins, and flavonols. Because of long‐time incubation, SERS sensors can access the extracellular space in the inner of the layer. The location of silver nanoparticles inside the onion layer has been monitored by the SERS images collected from chemicals present in the onion and/or reporter molecules attached to the nanoparticles. Our studies show a competitive adsorption of intrinsic bio molecules of the onion layer and reporter molecules. Different spectra from different places of the layer indicate the complex heterogeneous chemical structure of the plant material. The pH‐sensitive reporter molecule para mercapto benzoic acid attached to the nanoparticles allows us to infer pH values inside the extracellular matrix of the onion layer. Copyright © 2015 John Wiley & Sons, Ltd.     

Two-colour HgCdTe infrared detectors operating above 200 K

The performance of dual waveband HgCdTe photodiodes fabricated using metaloorganic chemical vapour deposition operated at high temperatures is presented. The effect of additional separating layer on the quantum efficiency and cross-talk of the photodiodes is analyzed. The photodiodes with cutoff wavelengths up to 6 μm, good R₀A product, and high quantum efficiency at 200 K have been demonstrated. The temperature dependence of the differential resistance is discussed. It is shown that the multilayer heterojunction P-n-N-n-P structure operating in a simultaneous mode has better performance than a structure operating in a sequential mode.     

Sonochemical degradation of triclosan in water and wastewater

The sonochemical degradation of 5 μg l⁻¹ triclosan, a priority micro-pollutant, in various environmental samples (seawater, urban runoff and influent domestic wastewater) as well as in model solutions (pure and saline water) was investigated. Experiments were conducted with a horn-type sonicator operating at 80 kHz frequency and a nominal applied power of 135 W, while solid-phase microextraction coupled with gas chromatography–electron capture detector (SPME/GC–ECD) was employed to monitor triclosan degradation. The latter followed pseudo-first order kinetics with the rate constant being (min⁻¹): 0.2284 for seawater > 0.1051 for 3.5% NaCl in deionised water > 0.0597 for centrifuged urban runoff  0.0523 for untreated urban runoff > 0.0272 for deionised water > 0.0063 for wastewater influent. SPME/GC–ECD and SPME coupled with gas chromatography–mass spectrometry (SPME/GC–MS) were also used to check for the formation of chlorinated and other toxic by-products; at the conditions in question, the presence of such compounds was not confirmed.     

Experimental and kinetic modeling study of oxidation of acetonitrile

Oxidation of acetonitrile has been studied in a flow reactor in the absence and presence of nitric oxide. The experiments were conducted at atmospheric pressure in the temperature range 1150–1450 K, varying the excess air ratio from slightly fuel-lean to very lean. Oxidation of CH₃CN was slow below 1300 K. Nitric oxide, hydrogen cyanide and nitrous oxide were detected as important products. A detailed chemical kinetic model for oxidation of acetonitrile was developed, based on a critical evaluation of data from literature. The rate coefficients for the reactions of CH₃CN and CH₂CN with O₂ were calculated from ab initio theory. Modeling predictions were in satisfactory agreement with experiments. Calculations were sensitive to thermal dissociation of CH₃CN and to the branching fraction for CH₃CN + OH to CH₂CN + H₂O and HOCN + CH₃, respectively. More work is desirable for these steps, as well as for reactions of CH₂CN and HCCN.     

Determination of retained austenite in bearing steel

M?ssbauer effect experiments in scattering geometry were performed for gauging plates and bearings in order to measure the retained austenite content. The results, obtained from numerical calculations of Mössbauer spectra are compared with the X-ray diffraction measurements. A simple three point Mössbauer effect technique is applied in order to decrease the time of measurements in the industrial use.