Accreditation of reference material producers: the example of IRMM's Reference Materials Unit

The potential approaches for third-party assessment of reference material producers are revisited and the activities of the Reference Materials (RM) Unit of the Institute for Reference Materials and Measurements (IRMM) to obtain accreditation to ISO Guide 34 and ISO 17025 are described. Accreditation was related to the Unit as all matrix RM activities of the institute are concentrated there. A management system was established that allows sufficient flexibility to be applicable to a wide range of RMs while being precise enough to ensure compliance with ISO Guides 30, 31 and especially 34 and 35. Accreditation was achieved in 2004 with independent scopes for testing and RM production and was confirmed and extended in 2005. The key aspects of the RM Unit's management system for RM production are presented. Presented at BERM-10, April 2006, Charleston, SC, USA     

Molecular modeling study of the differential ligand–receptor interaction at the μ, δ and κ opioid receptors

3D models of the opioid receptors , and were constructed using BUNDLE, an in-house program to build de novo models of G-protein coupled receptors at the atomic level. Once the three opioid receptors were constructed and before any energy refinement, models were assessed for their compatibility with the results available from point-site mutations carried out on these receptors. In a subsequent step, three selective antagonists to each of three receptors (naltrindole, naltrexone and nor-binaltorphamine) were docked onto each of the three receptors and subsequently energy minimized. The nine resulting complexes were checked for their ability to explain known results of structure-activity studies. Once the models were validated, analysis of the distances between different residues of the receptors and the ligands were computed. This analysis permitted us to identify key residues tentatively involved in direct interaction with the ligand.     

Spectrochemical Properties of Noncubical Transition Metal Complexes in Solutions. XIV. Angular Overlap Studies of bis(Salicylidene-2-aminothiazole)Copper(II) in Various Solvents

The copper(II) complex [Cu(sat)], where Hsat is salicylidene-2-aminothiazole (bidentate Schiff - base), was studied in variety of solvents. In the solid state, the complex is black. It has been characterized by elemental analysis, solubility in common solvents, molar conductivity, and ultraviolet (UV) and visible (Vis) spectroscopy. The complex is easily soluble in common solvents such as chloroform, dimethylformamide, dimethyl sulfoxide, and 1,4-dioxane. The known crystal structure of similar compounds shows planar coordination geometry for the copper center. Combined multitechnique experiments have been applied to confirm the structure of the complex in solutions. The molar conductivities indicate their nonelectrolyte properties in all these solvents. The spectroscopic measurements were used to study the coordination properties of donoratoms and their bonding abilities.     

Evaluation of a purge-and-trap injection system for capillary gas chromatography-microwave induced plasma-atomic emission spectrometry for the determination of volatile selenium compounds in water

A method is presented for the selective determination of the volatile selenium species dimethylselenide and dimethyldiselenide, using a commercially available purge-and-trap injection system coupled to capillary gas chromatography-microwave induced plasma-atomic emission spectrometry. The efficiency of the purging step was evaluated and the parameters affecting the purge and trap processes were optimized. The method was applied to the determination of volatile selenium compounds in lake water. Relative detection limits of 2ng/l for dimethylselenide and dimethyldiselenide, corresponding to an absolute detection limit of 10 pg, were achieved.     

Complexing properties of methyl and phenyl glycine derivatives in their compounds with H+, Ni(II), Cu(II), and Zn(II)

The influence of the solvent and the substituents on the complexing properties of methyl and phenyl glycine derivatives is discussed. On the basis of a computer analysis of potentiometric titration results, the composition and the stability constants of the complexes ofN-methylglycine,N,N-dimethylglycine,N-phenylglycine and phenylglycine with H⁺ and with Ni(II), Cu(II), Zn(II) were determined. The ligand-metal coordination mode as well as the zwitterion level in percent in ligand/proton systems were determined by spectral analyses and equilibria studies.

---

Komplexbildung der Methyl- und Phenylglycin-Derivate in ihren Verbindungen mit dem Proton und Ni(II), Cu(II) und Zn(II)

Zusammenfassung Der Einfluß des Lösungsmittels und der Substituenten auf die komplexbildenden Eigenschaften der Methyl- und Phenylglycin-Derivate wird diskutiert. Anhand einer Computer-Analyse von potentiometrischen Daten wurden die Zusammensetzung und die Beständigkeitskonstanten der Komplexe vonN-Methylglycin,N,N-Dimethylglycin,N-Phenylglycin und Phenylglycin mit H⁺, Ni(II), Cu(II) und Zn(II) festgestellt. Mittels spektroskopischer Methoden und Gleichgewichtstudien wurde der Koordinationstyp des Liganden mit dem Metall festgestellt sowie der Prozentanteil des Zwitterions im Ligand/Proton-System.

     

Investigation of suitable digestion methods for the determination of total phosphorus in soils

Total phosphorus in five soils with different compositions which were obtained from different places were extracted by using Na(2)CO(3) fusion, HClO(4) digestion, HClO(4) + HNO(3) digestion, HF + HClO(4) digestion or NaOBr oxidation methods. In order to test the suitability of the HF + HClO(4) digestion the results obtained by this method were compared with the others above, especially the Na(2)CO(3) fusion which is accepted as a standard method. The phosphorus amount found with the HF + HClO(4) digestion method were almost the same as the phosphorus amount by the Na(2)CO(3) fusion method, while the superiority in extracting phosphorus when compared to other methods were obvious. The methods used in the study were evaluated according to the recovery of total phosphorus, ease of application and rapidity with which they were performed. Orthophosphate in the soil extracts was determined by the molybdenum blue colour method. The relationships between methods are examined statistically.     

High mobility of dithiophene-tetrathiafulvalene single-crystal organic field effect transistors

Single-crystal field effect transistors of the organic semiconductor dithiophene-tetrathiafulvalene (DT-TTF) were prepared by drop casting. Long, thin crystals connected two microfabricated gold electrodes, and a silicon substrate was used as a back gate. The highest hole mobility observed was 1.4 cm2/Vs, which is the highest reported for an organic semiconductor not based on pentacene. A high ON/OFF ratio of at least 7 x 105 was obtained for this device.     

Complex formation of isocytosine tautomers with PdII and PtII

Isocytosine (ICH) exists in solution as two major tautomers, the keto form with N1 carrying a proton (1a) and the keto form with N3 being protonated (1b). In water, 1a and 1b exist in equilibrium with almost equal amounts of both forms present. Reactions with a series of Pd(II) and Pt(II) am(m)ine species such as (dien)Pd(II), (dien)Pt(II), and trans-(NH(3))(2)Pt(II) reveal, however, a distinct preference of these metals for the N3 site, as determined by (1)H NMR spectroscopy. Individual species have been identified by the pD dependence of the ICH resonances. pK(a) values (calculated for H(2)O) for deprotonation of the individual tautomers complexes are 6.5 and 6.4 for the N3 linkage isomers of dienPd(II) and dienPt(II), respectively, as well as 6.2 and 6.0 for the N1 linkage isomers. The dimetalated species [(dienM)(2)(IC-N1,N3)](3+) (M = Pd(II) or Pt(II)) are insensitive over a wide range of pD. The crystal structure analysis of [(dien)Pd(ICH-N3)](NO(3))(2) is reported. Ab initio calculations have been performed for tautomer compounds of composition [(NH(3))(3)Pt(ICH)](2+), cis- and trans-[(NH(3))(2)PtCl(ICH)](+), as well as trans-[(NH(3))(2)Pt(ICH)(2)](2+). Without exception, N3 linkage isomers are more stable, in agreement with experimental findings. As to the reasons for this binding preference, an NBO (natural bond orbital) analysis for [(NH(3))(3)Pt(ICH-N3)](2+)strongly suggests that intramolecular hydrogen bonding between trans-positioned NH(3) ligands and the two exocyclic groups of the ICH is of prime importance. The calculations furthermore show a marked pyramidalization of the NH(2) group of ICH in the complex once the heterocyclic ligand forms a dihedral angle <90 degrees with the Pt coordination plane.     

Photogeneration and quenching of reactive oxygen species by urocanic acid

Urocanic acid, UCA, is characterized by two electronic transitions in the UV-B (280-320 nm) which comprise its broad absorption spectrum and give rise to wavelength-dependent isomerization quantum yields. The absorption spectrum of UCA extends into the UV-A (320-400 nm). Given the UV-A component of sunlight is significantly greater than the UV-B component it is hypothesized even weak UV-A photochemistry of UCA could be important for in vivo responses to UV radiation. Degenerate pump-probe experiments performed on t-UCA at several wavelengths in the UV-A reveal an excited-state absorption that undergoes a rapid, approximately 1 ps decay. Photoacoustic experiments performed on both the cis and trans isomers reveal the formation of a long-lived intermediate following UV-A excitation. The efficiency and action spectra for this latter photoactive process are presented and are similar for both isomers of UCA. Cholesterol hydroperoxide assays designed to investigate the nature of the UV-A photoreactivity of t-UCA confirm the production of reactive oxygen species. The bimolecular rate constant for the quenching of singlet oxygen by t-UCA is determined to be 3.5 x 10(6) M(-1) s(-1). Taking into consideration recent theoretical calculations and jet expansion studies of the electronic structure of gas-phase t-UCA, a model is proposed to explain the isomerization and photoreactivity of t-UCA in solution over the UV-A region.     

Effect of solvent composition on dispersing ability of reaction sialon suspensions

This work focuses on the optimization of the rheological behavior of suspensions considering different solvent compositions. The effects of methyl ethyl ketone (MEK)/ethanol (E) solvent mixtures on reaction sialon suspensions were investigated by measuring sedimentation behavior, adsorption of dispersant, and flow behavior. It was shown that both the flow behavior and the sedimentation behavior strongly depended on selection of solvent composition. Using 3 wt% KD1 as dispersant, well-dispersed colloidal suspensions could be obtained in MEK-rich solvents. The suspensions with 60 vol% MEK/40 vol% E as solvent could be fitted to the Bingham model with very low yield stress, while suspensions with pure MEK or ethanol-rich mixtures as solvent showed pseudo plastic behavior with relatively high yield stress values. A model was proposed to explain the different flow behaviors of suspensions considering the different configurations of dispersant at particles' surfaces.