Comparison of low-order multireference many-body perturbation theories

Tests have been made to benchmark and assess the relative accuracies of low-order multireference perturbation theories as compared to coupled cluster (CC) and full configuration interaction (FCI) methods. Test calculations include the ground and some excited states of the Be, H(2), BeH(2), CH(2), and SiH(2) systems. Comparisons with FCI and CC calculations show that in most cases the effective valence shell Hamiltonian (H(v)) method is more accurate than other low-order multireference perturbation theories, although none of the perturbative methods is as accurate as the CC approximations. We also briefly discuss some of the basic differences among the multireference perturbation theories considered in this work.     

Large area excimer laser induced deposition of titanium from titanium tetrachloride

Large area excimer laser induced deposition of titanium on fused silica from TiCl₄ is studied with an emphasis on process modeling. We show that several TiCl₄ monolayers can be adsorbed if the surface is adequately prepared and that the Ti thin film growth occurs through the photodecomposition of this adsorbed TiCl₄ layer. We propose two growth regimes. During an initiation phase, up to 3 nm in thickness, the adsorbed layer is photochemically decomposed giving a growth rate of 0.015 nm/pulse. In a second phase, the deposition rate increases to between 2 and 7 nm/pulse due to the laser heating of the preceding photochemically deposited titanium film. Between consecutive pulses, TiCl₄ molecules primarily from the adsorbed layer diffuse to the reaction zone leading to a new adsorbed layer ready to be transformed to solid titanium.     

Potentiometric and thermometric determination of mercaptopyrimidines

Summary Potentiometric and Thermometric Determination of Mercaptopyrimidines Potentiometric and thermometric methods for the determination of several 2- and 6-mercaptopyrimidines are described. Mercapto groups can be titrated as acids in water or in dimethylformamide media. The use of acetic acid as solvent allows titration of the basic pyrimidine nucleus. Thermometric titrimetry is also a valuable procedure for the titration of mercapto groups, either directly with sodium hydroxide or by back-titration with hydrochloric acid after addition of excess of alkali. About 10–25 mg of sample can be determined with an error better than 1%.     

Synthesis and structure of the incomplete cuboidal clusters [W3Se4H3(dmpe)3]+, [W3Se4H(3-x)(OH)x(dmpe)3]+ and [W3Se4(OH)3(dmpe)3]+, and the mechanism of the acid-assisted substitution of the coordinated hydrides

The novel incomplete cuboidal cluster [W3Se4H3(dmpe)3](PF6), [1](PF6), has been prepared by reduction of [W3Se4Br3(dmpe)3](PF6) with LiBH4 in THF solution. The trihydroxo complex [W3Se4(OH)3(dmpe)3](PF6), [2](PF6), was obtained by reacting [W3Se4Br3(dmpe)3](PF6) with NaOH in MeCN-H2O solution. The complexes [1](PF6) and [2](PF6) were converted to their BPh4- salts by treatment with NaBPh4. Recrystallisation of [1](BPh4) in the presence of traces of water affords the mixed dihydride hydroxo complex [W3Se4H2(OH)(dmpe)3](BPh4). The crystal structures of [1](BPh4), [2](BPh4) and [W3Se4H2(OH)(dmpe)3](BPh4) have been resolved. Although the [1]+ trihydride does not react with an excess of halide salts, reaction with HX leads to [W3Se4X3(dmpe)3]+ (X = Cl, Br). The kinetics of this reaction has been studied at 25 degrees C in MeCN-H2O solution (1:1, v/v) and found to occur with two consecutive kinetic steps. The first step is independent of the nature and concentration of the X(-) anion but shows a first order dependence on the concentration of acid (k1 = 12.0 mol(-1) dm(3) s(-1)), whereas the second one is independent of the nature and concentration of both the acid and added salts (k2 = 0.024 s(-1)). In contrast, the reaction of [2]+ with acids occurs in a single step with kobs = 0.63 s(-1)(HCl) and 0.17 s(-1)(HBr). These kinetic results are discussed on the basis of the mechanism previously proposed for the reactions of the analogous [W3S4H3(dmpe)3]+ cluster, with special emphasis on the effects caused by the change of S by Se on the rate constants for the different processes involved.     

Solvent extraction and spectrophotometric determination of titanium (IV) with 3-phenyl-3-methyl-2-mercaptopropenoic acid by use of the synergistic effect of pyridine

Summary The distribution equilibria of 3-phenyl-3-methyl-2-mercaptopropenoic acid (PhMMP), pyridine and the titanium (IV)-PhMMP complex in the presence of pyridine have been studied in the chloroform-water system. An extraction-photometric method for the determination of micro amounts of titanium has been developed. The synergistic effect of pyridine, and the influence of pH, the reagent concentration and the presence of electrolytes and masking agents on the equilibrium have been determined. From slope analysis of the distribution curves, the composition of the extracted species has been found to be Ti(OH)₂(HR)₂·py. The complex is extracted quantitatively. Beer's law is obeyed over the range 0.09–4.30g/ml titanium (IV) and the molar absorptivity is 1.30×10⁴1·mole^–1·cm^–1 at 447 nm. The method has been applied to the determination of titanium in ceramics.

---

Über die Extraktion und spektrophotometrische Bestimmung von Titan(IV) mit 3-Phenyl-3-methyl-2-mercaptopropensäure mit Hilfe der synergistischen Wirkung des Pyridins

Zusammmenfassung Das Verteilungsgleichgewicht von 3-Phenyl-3-methyl-2-mercaptopropensäure (PhMMP), Pyridin und Titan-PhMMP-Komplex in Gegenwart von Pyridin wurde in einem Wasser-Chloroform-System untersucht. Eine extraktionsphotometrische Methode für die Bestimmung von Mikromengen Titan(IV) wurde ausgearbeitet. Die synergistische Wirkung des Pyridins sowie der Einfluß des pH, des Reagens und der Gegenwart von Elektrolyten und maskierenden Reagenzien in der wäßrigen Phase auf das Gleichgewicht wurden bestimmt. Aus der Richtung der Verteilungskurven wurde für den extrahierten Komplex die Zusammensetzung Ti(OH)₂(HR)₂·py ermittelt. Der Komplex wird quantitativ extrahiert. Das Beersche Gesetz ist von 0,09–4,30g·ml^–1 Ti(IV) erfüllt, der molare Absorptionskoeffizient ist 1,13·10⁴1·mol^–1·cm^–1; die Sandell-Empfindlichkeit beträgt 3,7ng·cm^–2 bei 447 nm. Diese Methode wurde für die Bestimmung von Titan in keramischem Material verwendet.

     

Stabilization of γ‘ phase in Bi<Subscript>4</Subscript>V<Subscript>2-x</Subscript>Fe<Subscript>x</Subscript><Superscript>II</Superscript>O<Subscript>11-1.5x</Subscript> series

Summary This work reports the room-temperature stabilization of the Bi₄V_2-xFe_x^IIO_11-1.5x γ ‘ phase, a promising ionic conductive material that finds application in solid oxide fuel cell and oxygen sensor devices. The Fe(II) cation proved to be a better stabilizer than Fe(III), which was previously used, since a lower substitution degree of V⁵⁺ is needed for the former. Powder X-ray diffraction, Fourier-transform infrared spectroscopy and differential scanning calorimetry were used in these experiments.     

C-H activations at iridium(I) square-planar complexes promoted by a fifth ligand

In the presence of ligands such as acetonitrile, ethylene, or propylene, the Ir(I) complex [Ir(1,2,5,6-eta-C8H12)(NCMe)(PMe3)]BF4 (1) transforms into the Ir(III) derivatives [Ir(1-kappa-4,5,6-eta-C8H12)(NCMe)(L)(PMe3)]BF4 (L = NCMe, 2; eta2-C2H4, 3; eta2-C3H6, 4), respectively, through a sequence of C-H oxidative addition and insertion elementary steps. The rate of this transformation depends on the nature of L and, in the case of NCMe, the pseudo-first-order rate constants display a dependence upon ligand concentration suggesting the formation of five-coordinate reaction intermediates. A similar reaction between 1 and vinyl acetate affords the Ir(III) complex [Ir(1-kappa-4,5,6-eta-C8H12){kappa-O-eta2-OC(Me)OC2H3}(PMe3)]BF4 (7) via the isolable five-coordinate Ir(I) compound [Ir(1,2,5,6-eta-C8H12){kappa-O-eta2-OC(Me)OC2H3}(PMe3)]BF4 (6). DFT (B3LYP) calculations in model complexes show that reactions initiated by acetonitrile or ethylene five-coordinate adducts involve C-H oxidative addition transition states of lower energy than that found in the absence of these ligands. Key species in these ligand-assisted transformations are the distorted (nonsquare-planar) intermediates preceding the intramolecular C-H oxidative addition step, which are generated after release of one cyclooctadiene double bond from the five-coordinate species. The feasibility of this mechanism is also investigated for complexes [IrCl(L)(PiPr3)2] (L = eta2-C2H4, 27; eta2-C3H6, 28). In the presence of NCMe, these complexes afford the C-H activation products [IrClH(CH=CHR)(NCMe)(PiPr3)2] (R = H, 29; Me, 30) via the common cyclometalated intermediate [IrClH{kappa-P,C-P(iPr)2CH(CH3)CH2}(NCMe)(PiPr3)] (31). The most effective C-H oxidative addition mechanism seems to involve three-coordinate intermediates generated by photochemical release of the alkene ligand. However, in the absence of light, the reaction rates display dependences upon NCMe concentration again indicating the intermediacy of five-coordinate acetonitrile adducts.     

Two Intercalation Mechanisms of Oxazole Yellow Dimer (YOYO-1) into DNA

The oxazole yellow dye, YOYO-1 (a symmetric homodimer), is a commonly used molecule for staining DNA. We applied the brightness analysis to study the intercalation of YOYO-1 into the DNA. We distinguished two binding modes of the dye to dsDNA: mono-intercalation and bis-intercalation. Bis-intercalation consists of two consecutive mono-intercalation steps, characterised by two distinct equilibrium constants (with the average number of base pair per binding site equals 3.5): K1=3.36±0.43×107M−1 and K2=1.90±0.61×105M−1, respectively. Mono-intercalation dominates at high concentrations of YOYO-1. Bis-intercalation occurs at low concentrations.     

Waste Cleaning Waste: Combining Alginate with Biowaste-Derived Substances in Hydrogels and Films for Water Cleanup

Biowaste-derived substances isolated from green compost (BBS-GC) are environmentally friendly reactants similar to humic substances, which contain multiple functionalities, that are suitable for adsorbing different kinds of pollutants in wastewater. Herein, sodium alginate (derived from brown algae) cross-linked with both Ca²⁺ ions and BBS-GC in the form of hydrogels and dried films are proposed as green, easy-to-form, and handleable materials for tertiary water treatments. The results show that both hydrogels and films are mechanically stable and can effectively remove differently charged dyes through an adsorption mechanism that can be described by the Freundlich model. BBS-GC-containing gels always performed better than samples prepared without BBS-GC, revealing that such unconventional materials can integrate waste valorization and water decontamination, potentially providing social and environmental benefits.