Dipping versus spraying: exploring the deposition conditions for speeding up layer-by-layer assembly

Polyelectrolyte film fabrication by successive spraying of polycation and polyanion solutions is described and compared to classic dipping. The poly(styrenesulfonate)/poly(allylamine) system is examined in detail. The influence of various parameters such as spraying time, polyelectrolyte concentration, and effect of film drying during multilayer construction is investigated. It is found that film deposition by spraying is easily controlled and very reliable. The thickness of the multilayers grows linearly with the number of deposition cycles similarly to what is observed when dipping substrates or when polyelectrolyte solutions flow over a surface. The assembly of films is very fast and leads to films with small surface roughness as estimated by atomic force microscopy and X-ray reflectometry. Spray deposition allows achieving regular multilayer growth even under conditions for which dipping fails to produce homogeneous films (e.g., extremely short contact times). Moreover, because drainage constantly removes a certain quantity of the excess material arriving at the surface, one can even skip the rinsing step and, thus, speed up even further the whole buildup process.     

Electrophoretically mediated microanalysis with partial filling technique and indirect or direct detection as a tool for inhibition studies of enzymatic reaction

The inhibition of the model enzyme, haloalkane dehalogenase from Sphingomonas paucimobilis, was investigated by a combination of electrophoretically mediated microanalysis with a partial filling technique, followed by indirect or direct detection. In this setup, part of the capillary is filled with a buffer suitable for the enzymatic reaction (20 mM glycine buffer, pH 8.6) whereas the rest of the capillary is filled with the background electrolyte optimal for separation of substrates and products. Two different background electrolytes and corresponding detection approaches were used to show the versatility of the developed method. The inhibition effect of 1,2-dichloroethane on the dehalogenation of brominated substrate 1-bromobutane was studied by means of 10 mM chromate - 0.1 mM cetyltrimethylammonium bromide (pH 9.2) in combination with indirect detection or 20 mM beta-alanine - hydrochloric acid (pH 3.5) in combination with direct detection. The method was used to estimate the inhibition constant K(I) (0.44 mM by indirect detection and 0.63 mM by of direct detection) and to determine the inhibition type. Compared to spectrophotometric and other discontinuous assays, the method is rapid, can be automated, and requires only small amount of reagents that is especially important in the case of enzymes and inhibitors.     

Artificial neural networks for quantification in unresolved capillary electrophoresis peaks

The application of the combination of experimental design (ED) and artificial neural networks (ANNs) for the quantification of overlapped peaks in capillary zone electrophoresis is described. When the total separation cannot be achieved by separation techniques, the use of ED-ANN can be a suitable approach. The unstability of EOF causes peak shift that has to be corrected in order to apply ED-ANN methods. In this work, normalization procedure of electropherograms with consequent application of ANNs for quantification purpose was developed. Both, spectra and electropherograms can be used as multivariate data. In general, both kinds of data were found to be suitable for unresolved peaks quantification by ED-ANN approach.     

On-line enrichment system for manganese determination in water samples using FAAS

An on-line preconcentration procedure for the determination of manganese using flow-injection approach with flame atomic absorption spectrometry as a detection method is described. The proposed method is based on the complexation between Mn(II) and 5,10,15,20-tetrakis(4-carboxyphenyl)porphyrin (TCPP). Two approaches were investigated for enrichment of manganese; the formation of Mn-TCPP complex in a solution followed by its retention on a sorbent and the sorption of manganese ions onto the TCPP-modified resin. The best results was obtained for the first approach when 10⁻⁵ M reagent was on-line mixed with an aqueous sample solution and passed through the microcolumn packed with anion-exchange resin Amberlite IRA-904 for 5 min. The sorbed complexes were then eluted with 0.5 ml of 2 M HNO₃. A good precision (2.2-3.1% R.S.D. for 50 μg l⁻¹ manganese) and the enrichment factor of 30 were obtained with the detection limit of 12 μg l⁻¹ for 5 min loading time. The interference of anions and cations has been studied to optimize the conditions and the method was applied for determination of manganese in natural water samples. The results obtained by FI-FAAS and ETAAS (as a reference method) were not statistically different for a significance level of 0.05.     

Nanogel nanosecond photonic crystal optical switching

We developed a robust nanosecond photonic crystal switching material by using poly(N-isopropylacrylamide) (PNIPAM) nanogel colloidal particles that self-assemble into crystalline colloidal arrays (CCAs). The CCA was polymerized into a loose-knit hydrogel which permits the individual embedded nanogel PNIPAM particles to coherently and synchronously undergo their thermally induced volume phase transitions. A laser T-jump from 30 to 35 degrees C actuates the nanogel particle shrinkage; the resulting increased diffraction decreases light transmission within 900 ns. Additional transmission decreases occur with characteristic times of 19 and 130 ns. Individual NIPAM sphere volume switching occurs in the approximately 100 ns time regime. These nanogel nanosecond phenomena may be useful in the design of fast photonic crystal switches and optical limiting materials. Smaller nanogels will show even faster volume phase transitions.     

Evaluation of the residual stability of polyurethane automotive coatings by DSC

Degradation of poly(ester-urethanes), poly(ether-urethanes) and poly(acrylic-urethanes), as a base for automotive paintings in interior applications, has been studied by DSC. The samples were clearcoat and black-pigmented paints, unstabilized and stabilized with HALS Tinuvin 292, UV absorber Tinuvin 1130 and antioxidant Hostanox O3, exposed to weathering in Xenotest and in Arizona desert. From the dependences of oxidation onset temperature on the heating rate, the kinetic parameters enabling to calculate the oxidation induction time for a chosen temperature have been obtained. From the values of oxidation induction time, the protection factors of the additives and the residual stability of the polymer after an ageing stress has been evaluated. It has been shown that the equivalence between the two methods of weathering depends on the polymer composition. A new criterion for the evaluation of synergism/antagonism of additives in the stabilizing mixture has been proposed.     

The furan approach to oxacycles. Part 5: Synthesis of a chiral butenolide, building block towards biologically interesting natural products

We describe an efficient new approach for the synthesis of a chiral butenolide that is based on the oxidation of a chiral furan ring with singlet oxygen in the presence of Hünig’s base, followed by Luche reduction and in situ lactonization.     

Cure kinetics of epoxy resin and thermoplastic polymer

The cure kinetics and morphology of diglycidyl ether of bisphenol A (DGEBA) modified with polyvinyl acetate (PVAc) using diaminodiphenylmethane (DDM) as hardener were investigated through differential scanning calorimetry (DSC) and environmental scanning electron microscopy (ESEM). Isothermal curing measurements were carried out at 150, 120 and 80°C. The kinetic parameters were obtained using the general autocatalytic chemically controlled model. The comparison of the kinetic data indicates that the presence of PVAc does not change the autocatalytic nature of the cure reaction. Two T _g’s were observed in the fully cured samples of the modified systems. ESEM micrographies confirm the biphasic morphology.     

Complexation of Ni (II) and Zn(II) ions by 3-(1-naphthyI)-2-mercaptopropenoic acid

The complexation equilibria between Ni(II) and Zn(II) metal ions with 3-(1-naphthyl)-2-mercaptopropenoic acid (H₂NMP) were studied by glass electrode potentiometry, at 25 °C and 1.0 mol·dm^–3 in NaClO₄ as constant ionic medium in 50% (v/v) water-ethanol solutions. Formation constants for the complexes Ni(NMP), Ni(NMP) ₂ ^2– , Zn(NMP) and Zn(NMP) ₂ ^2– , refined by the MINIGLASS program, are reported.     

Application of capillary electrophoresis with different sample stacking strategies for the determination of a group of nonsteroidal anti-inflammatory drugs in the low microg x L(-1) concentration range

Several on-column sample preconcentration modes--large-volume sample stacking using the EOF pump (LVSEP), LVSEP with anion-selective exhaustive injection (LVSEP-ASEI) and field-amplified sample injection with sample matrix removal using the electroosmotic flow (EOF) pump (FAEP)--were used to analyze some nonsteroidal anti-inflammatory drugs (NSAIDs) by capillary electrophoresis, and then compared. Methanol was the background electrolyte solvent to suppress the EOF. The effect of the type and length of the solvent plug, and the sample injection time were investigated in FAEP to determine the conditions that provided the best response. LVSEP, LVSEP-ASEI, and FAEP improved the sensitivity of the peak area by 100-, 1200-, and 1800-fold, respectively. The methodology developed, in combination with solid-phase extraction (SPE), was applied to the analysis of water samples.