Market Power Issues in Bid-Based Hydrothermal Dispatch

The objective of this work is to investigate market power issues in bid-based hydrothermal scheduling. Initially, market power was simulated with a single stage Cournot–Nash equilibrium model. In this static model the equilibrium was calculated analytically. It was shown that the total production of N strategic agents is smaller than the least-cost solution by a factor of (N/(N+1)). Market power analysis for multiple stages was then carried through a stochastic dynamic programming scheme, where the decision in each stage and state is the Cournot–Nash equilibrium of a multi-agent game. Case studies with data taken from the Brazilian system are presented.     

Weighted inequalities for some integral operators with rough kernels

In this paper we study integral operators with kernels $$K(x,y) = k_1 (x - A_1 y) \cdots k_m \left( {x - A_m y} \right),$$ $k_i \left( x \right) = {{\Omega _i \left( x \right)} \mathord{\left/ {\vphantom {{\Omega _i \left( x \right)} {\left| x \right|}}} \right. \kern-0em} {\left| x \right|}}^{{n \mathord{\left/ {\vphantom {n {q_i }}} \right. \kern-0em} {q_i }}}$ where Ω _i : ? ⁿ → ? are homogeneous functions of degree zero, satisfying a size and a Dini condition, A _i are certain invertible matrices, and n/q ₁ +…+n/q _m = n?α, 0 ≤ α < n. We obtain the appropriate weighted L ^p -L ^q estimate, the weighted BMO and weak type estimates for certain weights in A(p, q). We also give a Coifman type estimate for these operators.     

Properties of polyethylene glycol supported tetraarylporphyrin in aqueous solution and its interaction with liposomal membranes

5,10,15,20-Tetrakis(4-hydroxyphenyl)porphyrin was functionalized by covalent attachment of poly(ethylene glycol) (PEG) chains of various molecular weights, 350, 2000, and 5000 Da. The properties of PEG-functionalized tetraarylporphyrins in aqueous solution and their interactions with liposomes have been studied. Electronic absorption spectroscopy, dynamic light scattering, atomic force microscopy, and fluorescence quenching were used to monitor aggregation of porphyrin chromophores and behavior of the attached PEG chains in the aqueous solution. The tendency for aggregation of porphyrin chromophores in aqueous solution and the efficiency of fluorescence quenching by KI decrease with increasing length of PEG chain linked to the porphyrin ring. The experimental results indicate that polymer clusters are present in aqueous solution of all pegylated porphyrins. The interactions between the pegylated porphyrins and phosphatidylcholine liposomes in the aqueous solution were studied using the fluorescence methods. The apparent binding constants of porphyrin chromophores to liposomes were determined. The degree of binding was found to be dependent on the molecular weight of the attached polymer.     

TRAJELIX: A Computational Tool for the Geometric Characterization of Protein Helices During Molecular Dynamics Simulations

Summary We have developed a computer program with the necessary mathematical formalism for the geometric characterization of distorted conformations of alpha-helices proteins, such as those that can potentially be sampled during typical molecular dynamics simulations. This formalism has been incorporated into TRAJELIX, a new module within the SIMULAID framework (http://inka.mssm.edu/~mezei/simulaid/) that is capable of monitoring distortions of alpha-helices in terms of their displacement, global and local tilting, rotation around their axes, compression/extension, winding/unwinding, and bending. Accurate evaluation of these global and local structural properties of the helix can help study possible intramolecular and intermolecular changes in the helix packing of alpha-helical membrane proteins, as shown here in an application to the interacting helical domains of rhodopsin dimers. Quantification of the dynamic structural behavior of alpha-helical membrane proteins is critical for our understanding of signal transduction, and may enable structure-based design of more specific and efficient drugs.     

Preparation of a new lightly cross-linked liquid crystalline polyamide by interfacial polymerization. Application to the obtainment of microcapsules with photo-triggered release

Microcapsules based on a new liquid crystalline lightly cross-linked polyamide, in which the state of order can be triggered by means of external stimuli, such as temperature and light, were prepared by interfacial polymerization. This polyamide exhibited a nematic phase up to 166 °C and it started to decompose at 340 °C; morphological variations of the film were observed by Scanning Electron Microscopy in correspondence to the clearing temperature; moreover, by continuous irradiation with UV light at room temperature, the polymer underwent E–Z photoisomerization. The prepared microcapsules contained either toluene, or concentrated solutions of naphthalene or β-carotene, as the core; in all cases, their outer surface appeared smooth and dense, while heterogeneities could be seen on the inner face. Capsule diameter lay in the range 30–120 μm, depending on the encapsulated material, with quite narrow size distributions. To the authors’ knowledge, this is the first example of microcapsules whose shell is completely constituted by a liquid crystalline lightly cross-linked polymer. Release experiments of β-carotene were performed in water and in tetrahydrofuran. β-Carotene release in water at 20 °C was strongly influenced by UV irradiation: in the absence of irradiation, it was practically negligible while, when microcapsules were submitted to continuous irradiation with UV light, β-carotene was quickly released and reached 100% release after 5 min. Preliminary experiments concerning the effect of temperature and of a swelling solvent, such as THF, on release, were also performed.     

Isotope dilution-thermal ionisation mass spectrometric analysis for tin in a fly ash material

Isotope dilution-thermal ionisation mass spectrometry (ID-TIMS) analysis has been applied to the determination of tin in a fly ash sample supplied by the EC Joint Research Centre (Ispra, Italy). The proposed procedure includes the silica gel/phosphoric acid technique for tin thermal ionisation activation and a strict heating protocol for isotope ratio measurements. Instrumental mass discrimination factor has been previously determined measuring a natural tin standard solution. Spike solution has been prepared from ¹¹²Sn-enriched metal and quantified by reverse isotope dilution analysis. Two sample aliquots were spiked and tin was extracted with 4.5 M HCl during 25 min ultrasound exposure time. Due to the complex matrix of this fly ash material, a two-step purification stage using ion-exchange chromatography was required prior TIMS analysis. Obtained results for the two sample-spike blends (10.11 ± 0.55 and 10.50 ± 0.64 μmol g⁻¹) are comparable, both value and uncertainty. Also a good reproducibility is observed between measurements. The proposed ID-TIMS procedure, as a primary method and due to the lack of fly ash reference materials certified for tin content, can be used to validate more routine methodologies applied to tin determination in this kind of samples.     

Phase transitions in K3AlF6

Phase transitions in the elpasolite-type K₃AlF₆ complex fluoride were investigated using differential scanning calorimetry, electron diffraction and X-ray powder diffraction. Three phase transitions were identified with critical temperatures , and . The α-K₃AlF₆ phase is stable below T₁ and crystallizes in a monoclinic unit cell with a=18.8588(2)Å, b=34.0278(2)Å, c=18.9231(1)Å, β=90.453(1)° (a=2a_c−c_c, b=4b_c, c=a_c+2c_c; a_c, b_c, c_c—the basic lattice vectors of the face-centered cubic elpasolite structure) and space group I2/a or Ia. The intermediate β phase exists only in very narrow temperature interval between T₁ and T₂. The γ polymorph is stable in the T₂<T<T₃ temperature range and has an orthorhombic unit cell with a=36.1229(6)Å, b=17.1114(3)Å, c=12.0502(3)Å (a=3a_c−3c_c, b=2b_c, c=a_c+c_c) at 250 °C and space group Fddd. Above T₃ the cubic δ polymorph forms with a_c=8.5786(4)Å at 400 °C and space group . The similarity between the K₃AlF₆ and K₃MoO₃F₃ compounds is discussed.     

Improved diffusion Monte Carlo propagators for bosonic systems using Itô calculus

The construction of importance sampled diffusion Monte Carlo (DMC) schemes accurate to second order in the time step is discussed. A central aspect in obtaining efficient second order schemes is the numerical solution of the stochastic differential equation (SDE) associated with the Fokker-Plank equation responsible for the importance sampling procedure. In this work, stochastic predictor-corrector schemes solving the SDE and consistent with It? calculus are used in DMC simulations of helium clusters. These schemes are numerically compared with alternative algorithms obtained by splitting the Fokker-Plank operator, an approach that we analyze using the analytical tools provided by Ito; calculus. The numerical results show that predictor-corrector methods are indeed accurate to second order in the time step and that they present a smaller time step bias and a better efficiency than second order split-operator derived schemes when computing ensemble averages for bosonic systems. The possible extension of the predictor-corrector methods to higher orders is also discussed.