Thermal and morphological characterization of highly porous nanocomposites for possible application in potassium controlled release

The use of fertilizer and water availability are essential factors limiting the agricultural production. The controlled release technology is very promising because it allows the maintenance of fertilizer concentrations within an ideal range avoiding inefficiency and toxicity problems, minimizing the environmental impacts and improving their efficiency. In this context, the nanostructured hydrogels appear as a possible carrier vehicle for these controlled release systems due to their inherent properties, such as biodegradability, low toxicity, and cost, rapid absorption and desorption controlled capacity of water and solutes. In this work, we performed the synthesis of nanostructured hydrogels based on poly(methacrylic acid) (PMAA)/Cloisite-Na⁺ via free radical polymerization. SEM images indicated a similarity in the basic structure of all nanocomposites. The porous diameter of the hydrogels increased with increasing of nanoclay content. EDS analysis showed the ions belonging to nanoclay present in the nanocomposites, confirming the formation of true nanocomposites. TG–DTG and DSC techniques confirmed an improvement in the thermal stability of nanocomposites caused by the addition of nanoclay. For instance, the degradation initial temperature of the hydrogel was increased from 198.5 to 203.5 °C, and inversely, the degradation rate of the 2° thermal event was decreased from 0.694 to 0.472% min °C^?1, when the nanoclay was increased from 0 to 20 mass/%. Moreover, the controlled release investigation showed an improvement in the release time and quantity of the fertilizer released with nanoclay content. This result is very required for this specific application.     

Thermogravimetric investigations of new γ-γ′ cobalt-based superalloys

The aim of the study is characterization of high-temperature oxidation behavior of new Co-based superalloys by thermogravimetry (TG). The following alloys have been taken into account: Co–9Al–9W, Co–20–Ni–7Al–7W, Co–10Al–5Mo–2Nb and Co–20Ni–10Al–5Mo–2Nb (at.%). The thermogravimetric analysis was carried out in the temperature range 40–1200 °C of heating rate 5° min^?1. The investigation was performed using the thermal analyzer NETZSCH STA 449 F3 Jupiter. TG–DTG plots showed oxidation behavior up to 1200 °C and indicated the temperatures of further isothermal oxidation examinations. The oxidation behavior of basic Co–9Al–9W (at.%) alloy was compared to W-free Co–10Al–5Mo–2Nb and Co–20Ni–10Al–5Mo–2Nb (at.%) alloys. The obtained data showed different oxidation behavior dependably on the type of alloying elements. Moreover, the effect of Ni addition on oxidation performance was determined. The scales grown on Co-base superalloys after thermogravimetry were evaluated by means of scanning electron microscopy and energy dispersive spectroscopy.     

Heterologous Expression,Biosynthetic Studies,and Ecological Function of the Selective Gq‐Signaling Inhibitor FR900359

The cyclic depsipeptide FR900359 (FR), isolated from the tropical plant Ardisia crenata, is a strong and selective inhibitor of Gq proteins, making it an indispensable pharmacological tool to study Gq‐related processes, as well as a promising drug candidate. Gq inhibition is a novel mode of action for defense chemicals and crucial for the ecological function of FR, as shown by in vivo experiments in mice, its affinity to insect Gq proteins, and insect toxicity studies. The uncultured endosymbiont of A. crenata was sequenced, revealing the FR nonribosomal peptide synthetase (frs) gene cluster. We here provide a detailed model of FR biosynthesis, supported by in vitro enzymatic and bioinformatic studies, and the novel analogue AC‐1, which demonstrates the flexibility of the FR starter condensation domains. Finally, expression of the frs genes in E. coli led to heterologous FR production in a cultivable, bacterial host for the first time.     

Electrochemical and associated techniques for the study of the inclusion complexes of thymol and β-cyclodextrin and its interaction with DNA

Journal of Solid State Electrochemistry - Thymol, a potent agent for microbial, fungal, and bacterial disease, has low aqueous solubility and it is genotoxic, i.e., is capable of damaging...     

Chemical and electrochemical treatment effects on the morphology,structure, and electrochemical performance of carbon fiber with different graphitization indexes

The association of capacitive charging of the double-layer and a faradic redox reaction is desirable on carbon fiber (CF) when oxygen functional groups or other heteroatoms are present on its surface enhancing its capacitive properties. In this work, a systematic study of carbon fiber produced at three different heat treatment temperatures (HTT) of 1000, 1500, and 2000 °C was performed upon two approaches: middle (chemical) and severe (electrochemical) oxidative treatments. Morphological, structural, and surface chemical changes were investigated by field emission gun-scanning electron microscopy, X-ray diffraction, Raman spectroscopy, and X-ray photoelectron spectroscopy. Electrochemical responses were analyzed by galvanostatic charge/discharge, electrochemical impedance spectroscopy, and cyclic voltammetry. Raman results showed that the electrochemical oxidation promoted structural variation on CF samples independently of their HTT. Concerning the specific capacitance, the results indicated that chemical treatment was more effective for CF1000 than those for CF1500 and CF2000. This behavior may be attributed to higher amount of oxygen on its surface as well as its lower structural ordering. Otherwise, for CF1000, the electrochemical treatment increased its resistivity. However, for CF1500 and CF2000, which present higher graphitization levels and less heteroatom contents, greater capacitance values were observed after their electrochemical oxidative treatment.     

The N $N$ -Link Swimmer in Three Dimensions: Controllability and Optimality Results

Acta Applicandae Mathematicae - We describe a new form of diagonalization for linear two point constant coefficient differential operators with arbitrary linear boundary conditions. Although the...     

Nonlinear hyperbolic-parabolic partial differential equation in noncylindrical domain

In this paper we study the existence of weak solutions of the mixed problem for the nonlinear hyperbolic-parabolic equation $\begin{gathered} K_1 (x)u'' + K_2 (x)u' + A(t)u + H(u) = f in Q \\ u = 0 on \Sigma \\ u(0) = u_0 ,K_1 (x)u'(0) = \sqrt {K_1 (x)} u_1 (x) \\ \end{gathered} $ whereQ is a noncylindrical domain of ?ⁿ⁼¹ with lateral boundary Σ, {A(t); t≥0} is a family of operators of ?(H ₀ ¹ (ω),H ^-1(ω)) andH(s) is a continuous function which satisfies some appropriate conditions.     

Thermal expansion of epoxy and polyester polymer mortars—plain mortars and fibre-reinforced mortars

The study was conducted in order to determine the coefficient of thermal expansion of two specific binder formulations of epoxy and unsaturated polyester polymer mortars. The variation of this parameter with temperature was also analysed. Polymer concrete and mortars have been observed to have lower coefficients of thermal expansion at lower temperatures than at higher temperatures. Plots of strains vs. temperature are often bilinear, indicating a sharp change in the coefficient of thermal expansion (International Congress on Polymers in Concrete, July 1995). To determine how this discontinuity varies for these two materials, specimens of both formulations were tested for several temperature ranges between −20 and 60 °C. In addition, to determine the influence of fibre reinforcements on thermal expansion of polymer mortars, epoxy polymer mortars reinforced with both carbon and glass chopped fibres were also tested for thermal expansion.

It was concluded that, for both formulations, the variation of thermal expansion with temperature follows a parabolic law rather than a bilinear law. The reinforcement of chopped glass fibres (1%) has no significant effect on thermal expansion of epoxy polymer mortar, while the inclusion of carbon fibres (2%) on the same mortar formulation has a reducing effect on thermal expansion of this composite material for temperatures above room temperature.     

Fragmentation of dipyridamole and related dipyrimidines by electrospray ionization collisional activated decomposition mass spectrometry

The coronary vasodilator, co-activator of antitumor compounds and antioxidant drug dipyridamole and several of its derivatives were studied by electrospray ionization (ESI) combined with collisional activated decomposition (CAD) in both positive and negative modes. These compounds produce abundant monocharged ions ([M + H](+)) under ESI. Interpretation of the CAD spectra showed that fragmentation occurs preferentially in the ethanolamine groups attached at C-2, C-4, C-6 and C-8. 2-Methoxyethanol is eliminated when ethanolamines are in positions C-2/C-6 and 2-aziridinethanol is eliminated from C-4/C-8 ethanolamines. The proposed fragmentation schemes were supported by deuterium labeling experiments and tandem mass spectrometry.     

Nature-inspired dimerization as a strategy to modulate neuropeptide pharmacology exemplified with vasopressin and oxytocin

Vasopressin (VP) and oxytocin (OT) are cyclic neuropeptides that regulate fundamental physiological functions via four G protein-coupled receptors, V_1aR, V_1bR, V₂R, and OTR. Ligand development remains challenging for these receptors due to complex structure–activity relationships. Here, we investigated dimerization as a strategy for developing ligands with novel pharmacology. We regioselectively synthesised and systematically studied parallel, antiparallel and N- to C-terminal cyclized homo- and heterodimer constructs of VP, OT and dVDAVP (1-deamino-4-valine-8-d-arginine-VP). All disulfide-linked dimers, except for the head-to-tail cyclized constructs, retained nanomolar potency despite the structural implications of dimerization. Our results support a single chain interaction for receptor activation. Dimer orientation had little impact on activity, except for the dVDAVP homodimers, where an antagonist to agonist switch was observed at the V_1aR. This study provides novel insights into the structural requirements of VP/OT receptor activation and spotlights dimerization as a strategy to modulate pharmacology, a concept also frequently observed in nature.

Structural and pharmacological study of parallel, antiparallel and N- to C-terminal cyclized homo- and heterodimers of vasopressin and oxytocin. This study spotlights dimerization as a strategy to modulate the pharmacology of neuropeptides.