The Design of Single Mode Large Cross-section Glass-based Waveguides for Photonic Integrated Circuits

This paper presents our recent simulation results and novel designs of single mode large cross-section glass-based waveguides for photonic integrated circuits (PICs). Simulations were performed using an in-house Finite Difference (FD) based mode solver and the FD Beam propagation Method (FD-BPM). Our simulation results show that this innovative technology could provide a simplified means to couple optical energy efficiently between optical components in a single chip. This would provide the base for the future large-scale integration of optical components in PICs. The novel idea of using single mode large cross-section glass-based waveguides as an optical integration platform is an evolutionary innovative solution for the monolithic integration of optical components, in which the glass-based structures act both as waveguides and as an optical bench for integration. This allows easy and efficient optical coupling between optical components and optical fibres, removing costly and tedious alignment problems and considerably reducing optical coupling losses in PICs. We expect that the glass-based waveguide PICs technology will enable the emergence of a new generation of compact, reliable, high speed, and multifunctional devices.     

Studying high-spin ferric heme proteins by pulsed EPR spectroscopy: Analysis of the ferric form of the E7Q mutant of human neuroglobin

In this work, the high-spin ferric form of the E7Q mutant of human neuroglobin (E7Q-NGB) is studied by X-band continuous-wave electron paramagnetic resonance (CW EPR) and hyperfine sublevel correlation (HYSCORE) spectroscopy. It is shown that the use of matched pulses in the HYSCORE experiment is essential to observe the nitrogen spectral contributions. The validity of approximating the high-spin Fe(III) system (S=5/2) as an effectiveS=1/2 system is tested and the consequences for the HYSCORE simulations are highlighted. Comparative HYSCORE experiments combined with deuterium exchange experiments for aquometmyoglobin and ferric E7Q-NGB clearly show that the heme iron of the latter protein is pentacoordinated, lacking the distal water. Furthermore, CW EPR experiments show that, at high pH, the E10K residue is coordinating to the heme iron in this globin. These observations are corroborated by resonance Raman experiments and could also be reproduced for other E7 mutants of human and mouse neuroglobin. Finally, the proton and nitrogen hyperfine and nuclear quadrupole parameters obtained for ferric E7Q-NGB are discussed in detail.     

Strong temperature effect on X-ray photo-etching of polytetrafluoroethylene using a 10 Hz laser-plasma radiation source based on a gas puff target

The first results of experiments on direct photo-etching of heated PTFE using a 10 Hz X-ray source based on a laser-irradiated gas puff target are presented. X-ray radiation in the wavelength range from 6 to 20 nm was produced as a result of irradiation of a double-stream gas puff target with Nd:YAG laser pulses of energy 0.8 J and time duration 3 ns. The resulting X-ray pulses with energy of about 100–200 mJ were used to irradiate samples of PTFE to create microstructures by direct photo-etching. Strong enhancement of the photo-etching process was observed for samples heated up to 300 °C. PACS 52.38.Ph; 81.65.Cf; 61.82.Pv     

Effect of accumulation on the formation of multiply charged ions in solids under grazing incidence of multiple laser radiation

The effect of accumulation on the formation of multiply charged ions in optically opaque solids as a function of the number and the angle of incidence of laser pulses is investigated by mass spectrometry. It is revealed that the accumulation effect manifests itself at prethreshold power densities q = 10⁸–10⁹ W/cm² irrespective of the angle of incidence of laser radiation α = 18°–85° and at subthreshold power densities q > 10¹⁰ W/cm² in the case of grazing incidence of laser radiation at an angle α = 85°. The accumulation effect brings about an increase in the maximum charge multiplicity Z _max of tungsten ions and a decrease in the number of impurity ions and in their intensity. No accumulation effect is observed at subthreshold power densities when laser radiation is incident at an angle α = 18°.     

Influence of the defect structure on the electrical conductivity of Pb5Ge3O11 single crystals at high temperatures

The impedance spectra of Pb₅Ge₃O₁₁ single crystals are measured in the frequency range from 5 Hz to 13 MHz at temperatures of 600 to 800 K in dry air and in a dry or wet nitrogen gas. It is found that the temperature and the gas composition significantly affect the electrical properties of the compound. The data obtained are used to discuss the origin of crystal lattice defects and their influence on charge transfer. It is concluded that the conduction is mixed in character (p-type electronic and ionic due to oxygen ions). The proton conduction is shown experimentally to be feasible. The possible mechanisms of proton transport in Pb₅Ge₃O₁₁ are discussed.     

Design of the cold atom PHARAO space clock and initial test results

In this paper we describe the cold atom clock PHARAO, designed for microgravity operation. All elements of the PHARAO engineering model have been manufactured and delivered to CNES, the French space agency. We present the clock design, its main characteristics, and initial science operation. PHARAO is one of the main components of the Atomic Clock Ensemble in Space payload that is scheduled to fly on board the International Space Station in 2010. PACS 07.87.+v; 06.30.Ft; 95.55.Sh; 32.80.Pj     

High power single-frequency continuous-wave Nd:YVO4 master-oscillator power amplifier

We report a highly-efficient, high-power, single-frequency Nd:YVO₄ master-oscillator power-amplifier with near-diffraction-limited output beam quality. A diode-pumped Nd:YVO₄ ring laser incorporating a passive method for suppressing axial-mode-hopping was employed as the master-oscillator, and was amplified by a three-stage diode-end-pumped Nd:YVO₄ amplifier, yielding 79 W of output with an extraction efficiency of 29%. The overall power gain was 15 dB for an input power from the master-oscillator of 2.4 W, and the M² parameter was less than 1.5 at the maximum power. The prospects for a further increase of power and brightness via this approach are considered. PACS 42.55.Xi; 42.60.Da; 42.60.Jf     

Comparison of detection efficiencies of negatively charged gold-alkanethiolate-, gold-sulfur- and gold-clusters in ToF-SIMS

In order to improve quantification of high mass ions, the influence of cluster composition on detection efficiencies has been studied using a TOF-SIMS IV with the extended capability of postaccelerating ions up to 20 keV. In this experimental study, we focus on the comparison of detection efficiencies for three types of negatively charged secondary cluster ions: gold-alkanethiolate-clusters (Au_xM_y), gold-sulfur-clusters (Au_xS_y) and gold-clusters (Au_x). The clusters were sputtered from self-assembled monolayers of hexadecanethiols on gold substrates using 10 keV Ar⁺ primary ions. The detection efficiencies were derived on the basis of a function for the secondary electron yield and a fourth-order approximated Poisson probability distribution for electron propagation and amplification within the microchannel plate.In addition to the well-known dependence of detection efficiencies on ion mass and energy, which has already been studied for positively charged ions, we were able to show a similar behaviour for the investigated negatively charged secondary ions. We have observed major variations among the three types of clusters at similar mass and energy as predicted in a theoretical approach. The observed differences are due to the different composition of the investigated clusters which has a major influence on the kinetic ion induced electron emission within the microchannel plate. For the first time it was possible to experimentally verify these predictions for detection efficiencies.     

Thickness influence on surface morphology and ozone sensing properties of nanostructured ZnO transparent thin films grown by PLD

Transparent zinc oxide (ZnO) thin films with a thickness from 10 to 200 nm were prepared by the PLD technique onto silicon and Corning glass substrates at 350 °C, using an Excimer Laser XeCl (308 nm). Surface investigations carried out by atomic force microscopy (AFM) and X-ray diffraction (XRD) revealed a strong influence of thickness on film surface topography. Film roughness (RMS), grain shape and dimensions correlate with film thickness. For the 200 nm thick film, the RMS shows a maximum (13.9 nm) due to the presence of hexagonal shaped nanorods on the surface. XRD measurements proved that the films grown by PLD are c-axis textured. It was demonstrated that the gas sensing characteristics of ZnO films are strongly influenced and may be enhanced significantly by the control of film deposition parameters and surface characteristics, i.e. thickness and RMS, grain shape and dimension.