Rapid determination of aliphatic amines in water samples by pressure-assisted monolithic octadecylsilica capillary electrochromatography-mass spectrometry

A pressure-assisted capillary chromatography-mass spectrometry method based on the use of a monolithic octadecylsilica (ODS) capillary is proposed for the determination of aliphatic amines. A 25 mM citric acid buffer containing 10% methanol is used as running electrolyte. Separation is achieved by simultaneously applying a capillary electrophoresis (CE) voltage of 13 kV and an overimposed pressure of 8 bar. The use of pressure is required to ensure stable electrospray conditions. Analysis times are reduced by using a capillary column consisting of a 30 cm long monolithic silica capillary column bound with ODS and a fused-silica capillary column also 30 cm long. The proposed method was successfully applied to the determination of low-molecular-weight aliphatic amines in tap and river water. The analysis of real samples requires cleanup and preconcentration, which can be performed automatically by inserting a minicolumn in the replenishment system of the commercial instrument.     

Analytical potential from ab initio calculations for the Fe+-H2O and Feo-H2O systems

Analytical intermolecular potentials for the Fe⁺?H₂O and Fe^o?H₂O systems have been determined from ab initio calculations. Interaction energies for a lot of points along the two potential energy surfaces were calculated using Huzinga's MINI ?2 basis set. The results obtained were fitted to an analytical function containing 11 adjustable parameters that we have already used with success for the Fe²⁺?H₂O system. The goodness of the generated intermolecular potentials is discussed.     

Polarographic determination of pilocarpine using the catalysed pre-wave of nickel(II)

On the basis of a detailed study of the pilocarpine-induced nickel(II) pre-wave using various polarographic techniques, an electrode process mechanism is proposed in which the formation of a catalytic complex between aquo-nickel(II) and veronalate-nickel(II) on the one hand and unprotonated pilocarpine adsorbed on the electrode surface on the other is followed by the reduction of nickel(II) in the complex and the release of the catalytic ligand. The pre-peak recorded by differential-pulse polarography in the system 1 × 10^?3 M Ni(II)-1 × 10^?2 M sodium veronal, nitric acid (pH 8.5) (with ionic strength maintained at 0.2 with sodium nitrate) can be used for quantitative determination of pilocarpine at concentrations in the range 2.5 × 10^?7-8 × 10^?6 M.     

Study of the microstructure of tetrahydrofuran-3,3 dimethyloxetane copolymers by 13C-NMR spectroscopy.

The microstructure of tetrahydrofuran (A)-3,3 dimethyloxetane (B) copolymers was studied by ¹³C-{¹H}-NMR spectroscopy. Only the methyl carbons corresponding to the 3,3 dimethyloxetane unit appear as a singlet, whereas the other carbons present a more complicated spectral pattern than it would be expected if ? effects were negligible. The assignment of the resonance signals allowed the determination of the values of the probabilities of the different triads, which were in good agreement with those obtained from the reactivity ratios.     

Acidity and activity of H-mordenite in m-xylene isomerization

The dependence of the activity of H-mordenites prepared from a natural mordenite on the nature and strength of the acid groups present was studied. The superior catalytic activity and stability of the H(Ag)–MOR zeolite compared with other H-forms is explained on the basis of NH₃ adsorption and IR measurements.

---

H-, . H(Ag)–MOP H- NH₃ .

     

Reconocimiento de nicotina en una hebrita de tabaco

Summary Adaption of theLuís method for the detection of nicotine to microscale, usingEmich's capillary technic proved successful, attaining identification limit of 0,03g.Applying a sub-micro steam distillation effect, the nicotine in a speck of tobacco (1 mm² and less) could still be detected by using the above reaction.Extension of the above procedure to mixtures of nicotine with substances not volatile with steam, inorganic (halides) as well as organic compounds (other alkaloids, acids, etc.) proved to be successful, even when the nicotine is present in proportions of only 1 part in 1000.

---

Zusammenfassung Die Anwendung der Kapillartechnik vonEmich zum Nachweis von Nikotin nachLuís war erfolgreich und zeigte eine Erfassungsgrenze von 0,03g.Bei Anwendung einer Ultramikrodampfdestillation kann das Nikotin nach obiger Methode noch in Spuren von Tabak (1 mm² und weniger) nachgewiesen werden.Die Reaktion ist auch positiv bei Gemischen von Nikotin mit anderen, mit Wasserdampf nicht flüchtigen sowohl anorganischen (Halogenide) als auch organischen Substanzen (andere Alkaloide, Säuren etc.), selbst dann noch, wenn das Nikotin bloß im Verhältnis von 11000 vorhanden ist.

---

Résumé La technique capillaire d'Emich a été utilisée avec succès pour identifier la nicotine suivant le procédé deLuís; la limite de sensibilité est alors de 0,03g. La mise en oeuvre d'un ultramicroentraînement à la vapeur permet en outre, par application de la précédente méthode, d'identifier la nicotine dans des traces de tabac (moins de 1 mm²). La réaction est également positive en présence d'autres substances non entraînables par la vapeur d'eau, qu'elles soient minérales (halogénures) ou organiques (autres alcaloïdes, acides, etc. ...) même si la proportion de nicotine n'est que de l'ordre de grandeur de 1/1000.

     

Excess molar enthalpy of binary mixtures of hexane+ethyl benzene, <Emphasis Type="Italic">o</Emphasis>-xylene, <Emphasis Type="Italic">m</Emphasis>-xylene and <Emphasis Type="Italic">p</Emphasis>-xylene at 298.15 K

Summary This paper reports excess molar enthalpies of the binary systems hexane+ethyl benzene, hexane+o-xylene, hexane+m-xylene and hexane+p-xylene at 298.15 K and atmospheric pressure, over the whole composition range. The data was measured directly using a Calvet microcalorimeter. The excess magnitude was correlated to a Redlich-Kister type equation for each mixture. Also, we will discuss the results for the four mixtures studied here and by comparison with the same binary systems but containing propyl propanoate as first component. Finally, we will correlate our results with the Nitta-Chao and the three UNIFAC theoretical approximations.     

Discontinuous-flow potentiometric determination of chloride in a large-volume wall-jet cell using an ion-selective electrode based on a silver chloride film chemically deposited on a silver iodide support

A robust and sensitive chloride ion-selective electrode can be prepared by modifying the surface of an iodide-selective electrode using the chemical reaction with mercuric chloride in an oxidizing medium containing excess chloride. A thin film of silver chloride is thus formed ensuring a rapid and reproducible response to chloride. The analytical parameters of this electrode are similar to those of commercial silver chloride ion-selective electrodes, but its electrical impedance and signal noise are substantially lower and the response somewhat faster. Its sensitivity toward surfactants is somewhat suppressed. The electrode was used for discontinuous flow potentiometric (DFP) determinations in a large-volume wall-jet cell in which the electrode surface can be continuously reactivated by a cleaning solution contained in the cell. The method was applied to determination of chloride in ground waters from an industrial waste dumping site. The limit of determination is low 9 mug Cl(-)/l (2.6 x 10(-7)M), the precision good (the relative standard deviation varies from 0.6 to 3.0% for chloride contents from 2.90 to 0.15 mg/l, respectively) and the method correlates satisfactorily with the results of an indirect AAS determination of chloride. The sample throughput is high-90 measurements can be carried out per hour, corresponding to 30-40 determinations per hour.     

HPLC-Electrochemical detection with graphite-poly (tetrafluoroethylene) electrode Determination of the fungicides thiram and disulfiram

The suitability of composite graphite-poly(tetrafluoroethylene) (Teflon) electrodes as amperometric indicator electrodes in HPLC detection is demonstrated. The determination of the fungicides thiram and disulfiram in the presence of ziram has been chosen as an analytical problem. The optimization of working conditions, such as the choice of the organic solvent used in the mobile phase as well as its percentage, the potential applied to the composite electrode, and the time elapsed between mixing the carbamates and the injection, has been accomplished by using the wall-jet flow-cell configuration. The effect of the acetonitrile percentage used in the mobile phase on the retention of thiram, disulfiram, ziram and phenol was evaluated. Resolution up to the baseline can be achieved with 45% acetonitrile. The sensitivity of the determination of thiram and disulfiram in the presence of a constant concentration of ziram is slightly better when using a wall-jet cell; however, the background current is higher, as well as the baseline noise and the time necessary to achieve stabilization of the baseline before the injection. Lower limits of detection for both fungicides, as well as a better repeatability, were obtained when using a thin-layer flow cell configuration. As an application, the determination of thiram in spiked apple samples, at a level of 0.5 mg thiram kg(-1) apple, has been carried out with a mean recovery of 97 +/- 3% for a significance level of 0.05.     

Qualitative and quantitative sensitivity in flame photometry

Concepts of sensitivity in flame photometry are discussed. A distinction is made between sensitivity itself, concentration limits and dilution limits applied to qualitative and quantitative analysis by flame photometry. Sensitivity values, as well as the concentration limits, are considered from two different aspects: as a function of the slope of calibration curves-percentual values-and as a function of fluctutions-fluctuational values. The concepts are applied to the two main branches of flame photometry, emission and absorption.