Oxygen transfer rate and pH as major operating parameters of citric acid production from glycerol by <Emphasis Type="Italic">Yarrowia lipolytica</Emphasis> W29 and CBS 2073

The amount of citric acid (CA) produced by Yarrowia lipolytica is dependent on the yeast strain and growth conditions such as pH, oxygen availability and medium composition. In this work, an experimental design based on the Taguchi method was applied to evaluate the effect of parameters: pH, carbon/nitrogen (C/N) ratio in the medium, oxygen mass transfer rate (OTR) and salts concentration, on the CA production by two Y. lipolytica strains, W29 (ATCC 20460) and CBS 2073. OTR and pH showed higher influence on the CA production for both strains. The increase of OTR from air to the culture medium led to a two- and three-fold improvement of the CA production by Y. lipolytica CBS 2073 and W29, respectively. Besides the individual effects of the parameters, a significant influence of the interaction between these parameters was observed, mainly between OTR and salts. Different values of the parameters were found at the optimum conditions for each strain, but the theoretically predicted and experimentally obtained citric acid concentrations (c_CA) were approximately 10 g L^?1 for both strains. The optimal conditions were also validated employing crude glycerol from biodiesel industry as a substrate, and similar behavior of the strains was observed.     

HPLC-fluorescence detection and MEKC-LIF detection for the study of amino acids and catecholamines labelled with naphthalene-2,3-dicarboxyaldehyde

Naphthalene-2,3-dicarboxyaldehyde (NDA) is commonly used for detection of primary amines in conjunction with their separation with HPLC and CE. The fluorescence of the derivatives can be measured by a conventional fluorometer or via LIF. NDA is a reactive dye, which can replace o-phthaldehyde (OPA) and provides for derivatives which are considerably more stable than OPA derivatives. In addition, NDA can be used to derivatize primary amines at concentrations as low as 100 pM. In this work, HPLC/fluorescence and MEKC/LIF experiments were performed to separate/detect six neuroactive compounds, the amino acids, Gly, Glu, Asp, gamma-aminobutyric acid (GABA) and the catecholamines, dopamine and noradrenaline. The two methods were compared in terms of performance of separation. The amino acids can be separated in HPLC in less than 30 min and an identical separation is obtained in CE using MEKC and lithium salts with greater resolution (the number of theoretical plates was approximately 5000 for HPLC and 200 000 for MEKC). The lowest detected concentration was in the range of 0.1 nM for CE/LIF. The presence of a high salt concentration does not affect the separation of the samples. Examples of the analysis of microdialysate samples as well as amino acids in Ringer's solution are presented.     

Engineering properties of a camelid antibody affinity sorbent for Immunoglobulin G purification

An IgG-specific camelid antibody matrix (BAC, Naarden, The Netherlands), developed from an immune phage display library, was characterized regarding engineering properties including mass transfer characteristics. Uptake kinetics and equilibrium binding capacity were determined by a finite bath method. Adsorption kinetic parameters were also determined using a real time biosensor. Slightly different properties to conventional Staphylococcal protein A affinity media were shown; especially a 2–2.5 times lower maximal binding capacity with a value of 26 mg/ml polyclonal IgG was obtained. Mass transfer could be described by using a film and pore diffusion model (D_e = 5 × 10⁻⁸ cm²/s). Determined engineering parameters were used to predict breakthrough behaviour in column mode considering film and pore resistances. The dynamic binding capacity at 10% breakthrough did not change when residence time was at least 6 min.     

End‐group fidelity in nitroxide‐mediated living free‐radical polymerizations

In this study, new nitroxides based on the 2,2,5‐trimethyl‐4‐phenyl‐3‐azahexane‐3‐oxy skeleton were used to examine chain‐end control during the preparation of polystyrene and poly(t‐butyl acrylate) under living free‐radical conditions. Alkoxyamine‐based initiators with a chromophore attached to either the initiating fragment or the mediating nitroxide fragment were prepared, and the extent of the incorporation of the chromophores at either the initiating end or the propagating chain end was determined. In contrast to 2,2,6,6‐tetramethyl piperidinoxy (TEMPO), the incorporation of the initiating and terminating fragment into the polymer chain was extremely high. For both poly(t‐butyl acrylate) and polystyrene with molecular weights less than or equal to 70,000, incorporations at the initiating end of greater than 97% were observed. At the terminating chain end, incorporations of greater than 95% were obtained for molecular weights less than or equal to 50,000. The level of incorporation tended to decrease slightly at higher molecular weights because of the loss of the alkoxyamine propagating unit, which had important consequences for block copolymer formation. These results clearly show that these new α‐H nitroxides could control the polymerization of vinyl monomers such as styrene and t‐butyl acrylate to an extremely high degree, comparable to anionic and atom transfer radical polymerization procedures. © 2000 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 38: 4749–4763, 2000     

Synthesis and thermal properties of thermosetting bis-benzocyclobutene–terminated arylene ether monomers

A series of new bis-benzocyclobutene-endcapped arylene ether monomers was prepared and characterized. Whereas 2,6-bis(4-benzocyclobutenyloxy)benzonitrile (BCB-EBN) could be prepared in good yield using the standard procedure (K₂CO₃/NMP/toluene/Dean–Stark trap/120°C), other bis(benzocyclobutene) (BCB)-terminated monomers containing ether-benzophenone (BCB-EK), ether-phenylsulfone (BCB-ES), and ether-6F-benzoxazole (BCB-EBO) moieties were invariably contaminated by mono-endcapped products under similar reaction conditions. This can be attributed to a much greater activating effect of the nitrile group on the ortho-fluorides in the aromatic nucleophilic displacement reaction than the carbonyl, sulfonyl, and benzoxazolyl groups. However, the latter monomers could be synthesized (70–80%) from 4-trimethylsiloxybenzocyclobutene and respective aromatic fluorides in the presence of CsF at 140°C. Similar curing behaviors under N₂ (DSC: extrapolated onset and peak temperatures at 227–230° and 260–262°C, respectively) characterized all four monomers. BCB-EK, BCB-ES, and BCB-EBN showed melting transitions at 108, 119, and 146°C, in that order. As BCB-EBO contained more rigid benzoxazole segments, it only exhibited a glass transition (T_g) at 85°C prior to curing exotherm, after it had been previously heated to 125°C. The following T_gs were observed for the cured materials: BCB-EK (201°C), BCB-EBN (224°C), BCB-ES (264°C), and BCB-EBO (282°C). The relative thermal stability according to TGA (He) results is: BCB-ES < BCB-EBN < BCB-EK < BCB-EBO. Finally, the results from thermal analysis, infrared spectroscopic, and variable temperature microscopic studies indicated that the nitrile group plays an important role in the cure chemistry, thermal, and microstructural properties of BCB-EBN. © 1998 John Wiley & Sons, Inc. J. Polym. Sci. A Polym. Chem. 36: 2637–2651, 1998     

Unexpected Antioxidant Efficiency of Chlorogenic Acid Phenolipids in Fish Oil-in-Water Nanoemulsions: An Example of How Relatively Low Interfacial Concentrations Can Make Antioxidants to Be Inefficient

Selecting effective antioxidants is challenging since their efficiency in inhibiting lipid oxidation depends on the rate constants of the chemical reactions involved and their concentration at the reaction site, i.e., at the interfacial region. Accumulation of antioxidants at the interface of emulsions is key to modulate their efficiency in inhibiting lipid oxidation but its control was not well understood, especially in emulsions. It can be optimized by modifying the physicochemical properties of antioxidants or the environmental conditions. In this work, we analyze the effects of surfactant concentration, droplet size, and oil to water ratio on the effective interfacial concentration of a set of chlorogenic acid (CGA) esters in fish oil-in-water (O/W) emulsions and nanoemulsions and on their antioxidant efficiency. A well-established pseudophase kinetic model is used to determine in the intact emulsified systems the effective concentrations of the antioxidants (AOs). The relative oxidative stability of the emulsions is assessed by monitoring the formation of primary oxidation products with time. Results show that the concentration of all AOs at the interfacial region is much higher (20–90 fold) than the stoichiometric one but is much lower than those of other phenolipid series such as caffeic or hydroxytyrosol derivatives. The main parameter controlling the interfacial concentration of antioxidants is the surfactant volume fraction, Φ_I, followed by the O/W ratio. Changes in the droplet sizes (emulsions and nanoemulsions) have no influence on the interfacial concentrations. Despite the high radical scavenging capacity of CGA derivatives and their being concentrated at the interfacial region, the investigated AOs do not show a significant effect in inhibiting lipid oxidation in contrast with what is observed using other series of homologous antioxidants with similar reactivity. Results are tentatively interpreted in terms of the relatively low interfacial concentrations of the antioxidants, which may not be high enough to make the rate of the inhibition reaction faster than the rate of radical propagation.     

Sizing up large protein complexes by electrospray ionisation-based electrophoretic mobility and native mass spectrometry: morphology selective binding of Fabs to hepatitis B virus capsids

The capsid of hepatitis B virus (HBV) is a major viral antigen and important diagnostic indicator. HBV capsids have prominent protrusions (‘spikes’) on their surface and are unique in having either T?=?3 or T?=?4 icosahedral symmetry. Mouse monoclonal and also human polyclonal antibodies bind either near the spike apices (historically the ‘α-determinant’) or in the ‘floor’ regions between them (the ‘β-determinant’). Native mass spectrometry (MS) and gas-phase electrophoretic mobility molecular analysis (GEMMA) were used to monitor the titration of HBV capsids with the antigen-binding domain (Fab) of mAb 3120, which has long defined the β-determinant. Both methods readily distinguished Fab binding to the two capsid morphologies and could provide accurate masses and dimensions for these large immune complexes, which range up to ~8 MDa. As such, native MS and GEMMA provide valuable alternatives to a more time-consuming cryo-electron microscopy analysis for preliminary characterisation of virus-antibody complexes.

A reagent-free method based on a photo-induced fluorimetry in a sequential injection system

According to the current demands of environmentally friendly analytical chemistry and with a view to achieving lower reagent consumption with improved analytical performance, an automatic methodology composed of a photoreactor and fluorimetric detection (λ_exc = 287 nm, λ_em = 378 nm) was developed. To this end, a sequential injection analysis (SIA) system was developed for indomethacin determination using ultra-violet (UV) light which promotes an increase in the fluorescence of indomethacin. This increase in sensitivity makes it possible to apply this methodology to a dissolution test and to determine indomethacin in pharmaceutical formulations.The calibration graph for indomethacin was linear between 4.10 × 10⁻⁶ and 9.00 × 10⁻⁵ mol L⁻¹and the detection limit was 1.23 × 10⁻⁶ mol L⁻¹. The method was proven to be reproducible with a R.S.D. < 5% and sampling rate of approximately 20 per hour. The potential effect of several compounds commonly used as excipients on analytical signals was studied and no interfering effect was observed. Statistical evaluation at the 95% confidence level showed good agreement between the results obtained for the pharmaceutical samples with both the SIA system and comparison batch procedures.     

NSAIDs interactions with membranes: a biophysical approach

This work focuses on the interaction of four representative NSAIDs (nimesulide, indomethacin, meloxicam, and piroxicam) with different membrane models (liposomes, monolayers, and supported lipid bilayers), at different pH values, that mimic the pH conditions of normal (pH 7.4) and inflamed cells (pH 5.0). All models are composed of 1,2-dipalmitoyl-sn-glycero-3-phosphocholine (DPPC) which is a representative phospholipid of most cellular membranes. Several biophysical techniques were employed: Fluorescence steady-state anisotropy to study the effects of NSAIDs in membrane microviscosity and thus to assess the main phase transition of DPPC, surface pressure-area isotherms to evaluate the adsorption and penetration of NSAIDs into the membrane, IRRAS to acquire structural information of DPPC monolayers upon interaction with the drugs, and AFM to study the changes in surface topography of the lipid bilayers caused by the interaction with NSAIDs. The NSAIDs show pronounced interactions with the lipid membranes at both physiological and inflammatory conditions. Liposomes, monolayers, and supported lipid bilayers experiments allow the conclusion that the pH of the medium is an essential parameter when evaluating drug-membrane interactions, because it conditions the structure of the membrane and the ionization state of NSAIDs, thereby influencing the interactions between these drugs and the lipid membranes. The applied models and techniques provided detailed information about different aspects of the drug-membrane interaction offering valuable information to understand the effect of these drugs on their target membrane-associated enzymes and their side effects at the gastrointestinal level.