On the Structure and Formation of Self-Assembled Lattices of Gold Nanoparticles

The structure and ordering of nanoparticles of gold functionalized with n-alkyl thiol molecules are studied both experimentally and theoretically. Samples where produced using n=6 to n=16 alkyl thiol molecules. High Resolution Electron Microscopy coupled with image processing was used to study the gold particle structure. The details of the particle structure are discussed. We found that when the gold surface is saturated with thiol molecules there is some tendency to produce molecules with a disulphide structure. We also show that ordered arrays of particles can be produced using Langmuir-Blodgett techniques. The crystal structure of the films produced is studied and found to be 3D hcp. We also report that thiol covered gold particles with a size of 5 nm present a rounded shape suggesting that thiol molecules might induce an isotropic surface energy. It is found in the theoretical calculations that a strong bond between gold and sulphur is required to stabilize the complex metal-n-alkyl thiol. It is predicted that otherwise a heavily distorted nanocore will be formed. This is contrary to the observed structure of the particles.     

Selenium speciation in animal tissues after enzymatic digestion by high-performance liquid chromatography coupled to inductively coupled plasma mass spectrometry

A procedure is described for the enzymatic digestion of tuna and mussel samples that allows the determination of selenium species by high-performance liquid chromatography in conjunction with inductively coupled plasma mass spectrometry. The species were extracted by two-step enzymatic hydrolysis with a non-specific protease (subtilisin). The selenium species were separated on a Spherisorb 5 ODS/AMINO column using two different chromatographic conditions, namely phosphate buffers at pH 2.8 and pH 6.0 as mobile phases. The method determines organic (trimethylselenonium, selenocystine, selenomethionine and selenoethionine) and inorganic selenium species (selenite and selenate), but only organic selenium species were found in the samples. The sum of identified selenium species in the sample was about 30% of the total selenium present in the enzymatic extract despite the fact that recoveries of total hydrolysed selenium were 93-102%. Trimethylselenonium ion and selenomethionine were found in both tuna and mussel samples and an unknown selenium species was also found in tuna samples.     

Copper(II) complexes with 4-amino-N-[4,6-dimethyl-2-pyrimidinyl]benzenesulfonamide. Synthesis, crystal structure, magnetic properties, EPR, and theoretical studies of a novel mixed mu-carboxylato, NCN-bridged dinuclear copper compound

New Cu(II) complexes of sulfamethazine (4-amino-N-[4,6-dimethyl-2-pyrimidinyl]benzenesulfonamide, HL) [Cu(2)(CH(3)COO)(2)(L)(2)].2dmf (1) and ([Cu(L)(2)].2H(2)O)(infinity) (2) were prepared and structurally characterized. Compound 1 crystallizes in the monoclinic system, space group P2(1)/n, with a = 8.9486(9) A, b = 15.0956(12) A, c = 16.542(3) A, beta = 105.584(15) degrees, and Z = 2. Compound 2 crystallizes in the monoclinic system, space group P2(1)/c, with a = 13.8097(8) A, b = 14.5765(4) A, c = 13.7853(15) A, beta = 96.033(9) degrees, and Z = 1. In compound 1 two copper ions are linked by two syn-syn acetates and two nonlinear NCN bridging groups pertaining to the deprotonated sulfamethazine ligands. Each copper center presents a nearly square planar geometry. Magnetic susceptibility data for 1 show a strong antiferromagnetic coupling with 2J = -216.7 cm(-)(1). The EPR spectra at the X- and Q-band frequencies present the signals corresponding to the dinuclear entity, being the zero-field splitting parameter, D = 0.265 cm(-)(1). The antiferromagnetic exchange coupling is discussed using DFT calculations on some model compounds with NCN bridging ligands and also on model structures with mixed mu-acetato and NCN bridges. The copper in the polymeric compound 2 is five coordinate. The CuN(5) chromophore has a highly distorted square pyramidal geometry with small axial N-Cu-N angles of 65.53(14) and 59.90(13) degrees. In the structure a sulfamethazinate anion binds to one copper through the sulfonamido and pyrimidine N atoms and to an adjacent copper via the amino N atom.     

Inorganic-metalorganic hybrids based on copper(II)-monosubstituted Keggin polyanions and dinuclear copper(II)-oxalate complexes. Synthesis, X-ray structural characterization, and magnetic properties

Reaction of in situ generated copper(II)-monosubstituted Keggin polyoxometalates and copper(II)-bipyridine-oxalate complexes in the corresponding alkaline acetate buffer led to the formation of hybrid metal organic-inorganic compounds K(2)[{SiW(11)O(39)Cu(H(2)O)}{Cu(2)(bpy)(2)(H(2)O)(2)(mu-ox)}(2)].14H(2)O (1), K(14)[{SiW(11)O(39)Cu(H(2)O)}{Cu(2)(bpy)(2)(mu-ox)}](2)[SiW(11)O(39)Cu(H(2)O)].55H(2)O (2), (NH(4))(4)[{SiW(11)O(39)Cu(H(2)O)}{Cu(2)(bpy)(2)(mu-ox)}].10H(2)O (3), and Rb(4)[{SiW(11)O(39)Cu(H(2)O)}{Cu(2)(bpy)(2)(mu-ox)}].10H(2)O (4). Their structures have been established by single-crystal X-ray diffraction. The main structural feature of these compounds is the presence of copper(II)-monosubstituted alpha-Keggin polyoxoanions as inorganic building blocks, on which the mu-oxalatodicopper metalorganic blocks are supported. Compound 1contains the discrete hybrid polyanion [{SiW(11)O(39)Cu(H(2)O)}{Cu(2)(bpy)(2)(H(2)O)(2)(mu-ox)}(2)](2)(-), whereas the polymeric hybrid polyanion [{SiW(11)O(39)Cu(H(2)O)}{Cu(2)(bpy)(2)(mu-ox)}(2)](n)(4)(n)(-) gives a monodimensional character to compounds 2-4. Magnetic and EPR results are discussed with respect to the crystal structure of the compounds. DFT calculations on both the [Cu(2)(bpy)(2)(H(2)O)(4)(mu-ox)](2+) cationic complex and the metalorganic blocks have been performed in order to determine the optimized geometry and the magnetic coupling constants, respectively.     

Identifying acetylated lignin units in non-wood fibers using pyrolysis-gas chromatography/mass spectrometry

A series of non-wood plant fibers, namely kenaf, jute, sisal and abaca, have been analyzed upon pyrolysis-gas chromatography/mass spectrometry (Py-GC/MS) of the whole material. The pyrolysis products mainly arise from the carbohydrate and lignin moieties of the fibers. The lignin-derived phenols belonged to the p-hydroxyphenylpropanoid (H), guaiacylpropanoid (G) and syringylpropanoid (S) structures, and showed a high S/G ratio of between 2.0 and 5.4, the highest corresponding to kenaf. Among the lignin-derived phenols released, small amounts of sinapyl and coniferyl acetates (in both cis- and trans-forms) were identified for the first time upon Py-GC/MS of lignocellulosic materials. Acetylation of the sinapyl and coniferyl alcohols was at the gamma-position of the side chain. The release of these alcohols derived from intact acetylated lignin units upon pyrolysis seems to indicate that the native lignin in the fibers selected for this study is at least partially acetylated. Sinapyl (and coniferyl) acetates have recently been suggested to be authentic lignin precursors involved in the polymerization of lignin along with the normal sinapyl and coniferyl alcohols. Py-GC/MS will offer a convenient and rapid tool for analyzing naturally acetylated lignins, as well as to screen plant materials for the presence of acetylated units in lignin.     

Kinetico‐Mechanistic Insights on the Assembling Dynamics of Allyl‐Cornered Metallacycles: The PtNpy Bond is the Keystone

The square‐like homo‐ and heterometallamacrocycles [{Pd(η³‐2‐Me‐C₃H₄)( L ⁿ )₂}₂{M(dppp)}₂](CF₃SO₃)₆ (dppp=1,3‐bis(diphenylphosphino)propane) and [{Pd(η³‐2‐Me‐C₃H₄)( L¹ )₂}₂{M(PPh₃)₂}₂](CF₃SO₃)₆ [py=pyridine, M=Pd, Pt, L ^{n =}4‐PPh₂py ( L¹ ), 4‐C₆F₄PPh₂py ( L² )] containing allyl corners were synthesised by antisymbiotic self‐assembly of the different palladium and platinum metallic corners and the ambidentate N,P ligands. All the synthesised assemblies displayed a complex dynamic behaviour in solution, the rate of which is found to be dependent on the electronic and/or steric nature of the different building blocks. A kinetico‐mechanistic study by NMR line shape analysis of the dynamics of some of these assemblies was undertaken in order to determine the corresponding thermal activation parameters. Both an enhanced thermodynamic stability and slower dynamics were observed for platinum‐pyridine‐containing species when compared with their palladium analogues. Time‐dependent NMR spectroscopy in combination with ESI mass spectrometry was used to study the exchange between the assemblies and their building blocks, as well as that occurring between different metallamacrocycles. Preliminary studies were carried out on the activity of some of the metallamacrocyclic compounds as catalytic precursors in the allylic substitution reaction, and the results compared with that of the monometallic allylic corner [Pd(η³‐2‐Me‐C₃H₄)( L¹ )₂]⁺.     

A novel flow injection chemiluminescence determination of Cr(VI) with Dichlorotris(1,10-phenanthroline)ruthenium(II)

A selective novel reverse flow injection system with chemiluminescence detection (rFI-CL) for the determination of Cr(VI) in presence of Cr(III) with Dichlorotris (1,10-phenanthroline)ruthenium(II), (Ru(phen)₃Cl₂), is described in this work. This new method is based on the oxidation capacity of Cr(VI) in H₂SO₄ media. First, the Ruthenium(II) complex is oxidized to Ruthenium(III) complex by Cr(VI) and afterwards it is reduced to the excited state of the Ruthenium(II) complex by a sodium oxalate solution, emitting light inside the detector. The intensity of chemiluminescence (CL) is proportional to the concentration of Cr(VI) and, under optimum conditions, it can be determined over the range of 3-300 μg L⁻¹ with a detection limit of 0.9 μg L⁻¹. The RSD was 8.4% and 1.5% at 5 and 50 μg L⁻¹, respectively. For the rFI-CL method various analytical parameters were optimized: flow rate (1 mL min⁻¹), H₂SO₄ carrier concentration (20% w/V), Ru(phen)₃Cl₂ concentration (5 mM) and sodium oxalate concentration (0.1 M). The effect of Cr(III), Fe(III), Al(III), Cd(II), Zn(II), Hg(II), Pb(II), Ca(II) and Mg(II), was studied. The method is highly sensitive and selective, allowing a fast, on-line determination of Cr(VI) in the presence of Cr(III). Finally, the method was tested in four different water samples (tap, reservoir, well and mineral), with good recovery percentage.     

Syntheses and Study of New 2-Hydroxy-5,6-Dihydro-2H-1,4-Oxazines by NMR and X-ray Crystallography

The preparation of six new 2-hydroxy-5,6-dihydro-2H-[1,4]-oxazines and four oxazino-oxazine type structures is described. The structures of four of these compounds were established by X-ray crystallographic analyses.     

Thermal diffusivity study of cheese fats by thermal lens detection

In this paper we used thermal lens spectrometry to determine the thermal diffusivity of cheese fats. We have used equal concentrations of cheese fats from oaxaca, chihuahua, gouda, manchego and mozzarella cheeses at 42°C temperature. The two lasers mismatched mode experimental configuration was used with a He-Ne laser, as a probe beam and an Ar⁺ laser as the excitation one. The characteristic time constant of the transient thermal lens was obtained by fitting the theoretical expression to the experimental data in order to obtain the thermal diffusivity of the cheese fat samples. This measured thermal property may contribute to a better understanding of the cheese fats quality, which is very important in food industry.     

First intermolecular cyclopropanation of Fischer dialkylaminocarbene complexes. Synthesis of 1-aminocyclopropanecarboxylic acid derivatives

[reaction: see text] The first cyclopropanation reaction of olefins with Fischer dialkylaminocarbene complexes is presented. The reaction yields 1-aminocyclopropanecarboxylic acid derivatives in a single step, usually with high diastereoselectivity. An approach to the asymmetric version of this reaction is also presented. The synthetic utility of the procedure is exemplified by the synthesis of both cycles of metanoproline in a single step. In addition, the synthesis of the first Fischer carbene containing a halocarbonyl group is reported.