Oxydation von Allylalkoholen mit Blei(IV)-acetat

Lead tetraacetate (LTA) oxidation of the allylic alcohols 1, 10, 14 and 19 leads to the formation of the epoxides 2, 11, 15 and 20 , products of a novel internal addition reaction of the electron deficient alcohol oxygen to the allylic double bond. In some cases ( 10, 14 ) the formation of a new type of acetoxylated enolethers ( 12, 16 ) is observed. The LTA oxidation of the allylic dienols 21 and 29 gives rise to the formation of the epoxyacetates 25 and 33 , products of a similar internal addition reaction. Furthermore, a variety of cyclization products ( 22, 23, 24, 26, 30, 31, 32 and 34 ) has been isolated whose formation requires an isomerisation of the allylic trans double bond to a cis one.     

Total synthesis of the marine alkaloid halitulin

The structure of the strongly cytotoxic marine alkaloid halitulin (1) has been confirmed by total synthesis and its absolute configuration determined as (15S). The synthesis follows a strategy previously reported by one of us and uses an efficient preparation of the quinoline-7,8-diol unit by modified Baeyer-Villiger and Skraup reactions. The O-benzyl protecting groups were removed in the last step of the synthesis by transfer hydrogenolysis without concomitant reduction of the quinoline ring. The method can be applied for the synthesis of halitulin analogues.     

The Derivation of Inductive Substituent Constants from pKa Values of 4-Substituted Quinuclidines. Polar effects. Part I

Thermodynamic pK_a-values have been determined for 38 4-substituted quinuclidinium perchlorates. They are remarkably sensitive to the polar effect of the substituent and cover a range of 3.63 pK_a units. Furthermore, they vary linearly and almost equally with temperature since the contribution of the TΔS° term to the free energy of ionization is relatively small and constant. The magnitude of the polar effect of the 4-cyano group varies with the solvent and appears to depend on its ability to form hydrogen bonds to the substituent rather than its dielectric constant. New inductive substituent constants σ_I^q are derived from the pK_a values. Their correlation with known inductive constants is only fair or unsatisfactory, especially as regards the relative order of hydrogen and the alkyl groups. The discrepancies can be ascribed mainly to the different models used to derive the substituent constants.     

Das Verhalten der WÄrmeleitfÄhigkeit von Kautschuk bei der Dehnung

Zusammenfassung Mit einer Me\apparatur, die nach einer Relativmethode die W?rmeleitung in fadenf?rmigen Kautschukvulkanisaten zu messen gestattet, wird der Einflu\ der Dehnung auf die W?rmeleitf?higkeit untersucht. Es ergibt sich ein wesentlicher Anstieg der W?rmeleitung mit der Dehnung bei allen untersuchten Materialien. Bei stark vulkanisiertem Kautschuk ist dieser Anstieg am geringsten, bei Polybutadienen ist er h?her als bei Naturkautschuk. Auf Grund von bekannten Vorstellungen über die Kinetik der hochpolymeren Moleküle bei Dehnung und über die Ausbreitung von W?rmewellen in Festk?rpern werden die Beobachtungsergebnisse gedeutet. Dabei wird festgestellt, da\ der Anstieg der W?rmeleitf?higkeit auf eine zunehmende Ausrichtung von Molekülkettenabschnitten in Dehnungsrichtung — die zugleich Richtung des W?rmestromes ist- und auf eine Abnahme der Zahl der Streuzentren für die W?rmewellen zurückzuführen ist. Auch Unterschiede bezüglich des Betrages des Anstiegs, den die einzelnen Materialien zeigen, k?nnen z. T. auf Grund dieser Vorstellungen erkl?rt werden.     

Synthese, 13C-NMR-Spektren und räumliche Struktur von ‘Push-Pull’-Diacetylenen

Synthesis, ¹³C-NMR Spectra, and X-Ray Investigation of ‘Push-Pull’ Diacetylenes Phenyl-substituted ‘push-pull’ diacetylenes 1f and 1g have been prepared by acetylation and benzoylation of the appropriate lithiodiynylamines 4 (Scheme 2). ¹³C-NMR spectra of diacetylenes 1a–g (Table 1) are discussed with respect to the expected polarisation of the diacetylene unit by ‘push’ and ‘pull’ substituents. X-Ray investigations of 1c , 1e , and 1f have been performed in view of the planned solid-state polymerisation of ‘push-pull’ diacetylenes. In the crystalline state, diacetylenes 1c and 1f are stacked, however, the stacking parameters do not allow a solid-state polymerisation.     

Dielectric Shielding of Ionic Charges in Aqueous Solutions of Different Ionic Strength

The thermodynamic functions of the proton transfer H₂tn²⁺+tn → 2 Htn⁺ (tn = 1,3-diaminopropane) have been determined in aqueous solutions containing different amounts of KCl (0.05 ? μ ? 3.01). The free energy (?ΔG) of the process decreases, whereas the enthalpy (-ΔH) increases with μ. There is reason to believe that the reaction is entirely controlled by the Coulomb forces between the two protonic charges. The electrostatic energy involved can be described in terms of a model incorporating an effective dielectric constant εe, such that δε_e/δμ and δ²ε_e/δμδT are both positive. The polarisation of pure water is produced by orientation of hydrogen-bonded dipole molecules H₂O, whereas the electrolyte solution is polarised in addition by dislocation of the ions K⁺ and Cl^?. Our results demonstrate that the former type of polarisation is much more temperature dependent than the latter.     

A 3D QSAR study on a set of dopamine D4 receptor antagonists

The molecular alignments obtained from a previously reported pharmacophore model have been employed in a three-dimensional quantitative structure-activity relationship (3D QSAR) study, to obtain a more detailed insight into the structure-activity relationships for D(2) and D(4) receptor antagonists. The frequently applied CoMFA method and the related CoMSIA method were used. Statistically significant models have been derived with these two methods, based on a set of 32 structurally diverse D(2) and D(4) receptor antagonists. The CoMSIA and the CoMFA methods produced equally good models expressed in terms of q(2) values. The predictive power of the derived models were demonstrated to be high. Graphical interpretation of the results, provided by the CoMSIA method, brings to light important structural features of the compounds related to either low- or high-affinity D(2) or D(4) antagonism. The results of the 3D QSAR studies indicate that bulky N-substituents decrease D(2) binding, whereas D(4) binding is enhanced. Electrostatically favorable and unfavorable regions exclusive to D(2) receptor binding were identified. Likewise, certain hydrogen-bond acceptors can be used to lower D(2) affinity. These observations may be exploited for the design of novel dopamine D(4) selective antagonists.     

Metal Complexes with Macrocyclic Ligands. Part XXXIX. Mono- and binuclear copper(II) complexes of a bridging bis[1, 4, 7-triazacyclononane]

The new bis-macrocycle 1, 1′-[(1H-pyrazol-3], 5-diyl)bis(methylene)bis[1, 4, 7-triazacyclononane] ( 1 ) was synthesized and its complexation with Cu²⁺ studied. Potentiometric and spectrophotometric titrations indicate that, in addition to the mononuclear species [Cu(LH₂)]⁴⁺, [Cu(LH)]³⁺, [CuL]²⁺, and [Cu(LH_?1)]⁺, binuclear complexes such as [Cu₂L]⁴⁺, [Cu₂(LH_?1)]³⁺, and [Cu₂(LH_-2)]²⁺ are also formed in solution. The stability constants and spectral properties of these are reported. The binuclear species [Cu₂(LH_?1)]³⁺ specifically reacts with an azide ion to give a ternary complex [Cu₂(LH_?1)(N₃)]²⁺, the stability and structure of which were determined spectrophotometrically and by X-ray diffraction, respectively. The two Cu²⁺ ions are in a square-pyramidal coordination geometry. The axial ligand is one of the N-atoms of the 1, 4, 7-triazacyclononane ring, whereas at the base of the square pyramid, one finds the other two N-atoms of the macrocycle, one N-atom of the pyrazolide and one of the azide, both of which are bridging the two metal centres. In [Cu₂(LH_?1)(N₃)]²⁺, a strong antiferromagnetic coupling is present, thus resulting in a species with a low magnetic moment of 1.36 B.M. at room temperature.     

Principal part of resolvent and factorization of an increasing nonanalytic operator-function

Let a selfadjoint operator-valued functionL() be given on the interval [a,b] such thatL(a)0,L(b)0,L()0 (ab), andL() has a certain smoothness (for instance, it satisfies Hölder's condition). It turns out that the spectral theory of the operator-valued functionL() can be reduced to the spectral theory of one operatorZ, the spectrum of which lies on (a, b) and which is similar to a selfadjoint operator. In particular, the factorization takes place:L()=M()(I–Z), where the operator-valued functionM() is invertible on [a, b]. Earlier similar results were known only for analytic operator-valued functions. The authors had to use new methods for the proof of the described theorem. The key moment is the decomposition ofL ^–1() into the sume of its principal and regular parts.     

Dispersion of the local parameters of quasilocalized low-frequency vibrational modes in a low-temperature glass: direct observation via single-molecule spectroscopy

Spectra of single tetra-tert-butylterrylene chromophore molecules embedded in an amorphous polyisobutylene matrix as microprobes were recorded. The individual temperature dependences of the spectral linewidths for the same single molecules (SMs) in a broad temperature interval (1.6 < T < 40 K) have been measured. This enabled us to separate the contributions of tunneling two-level systems and quasilocalized low-frequency vibrational modes (LFMs) to the observed linewidths. The analysis of the T dependences yields the values of LFM frequencies and SM-LFM coupling constants for the LFMs in the local environment of a given chromophore. Pronounced distributions of the observed parameters of LFMs were found. This result can be regarded as the first direct experimental proof of the localized nature of LFMs in glasses.