Determination of carnitine and acylcarnitines in urine by high-performance liquid chromatography-electrospray ionization ion trap tandem mass spectrometry

A high-performance liquid chromatography-mass spectrometry method has been developed for the simultaneous determination of native carnitine and eight acylcarnitines in urine. The procedure uses a solid-phase extraction on a cation-exchange column and the separation is performed without derivatization within 17 min on a reversed-phase C8 column in the presence of a volatile ion-pairing reagent. The detector was an ion trap mass spectrometer and quantification was carried out in the MS-MS mode. Validation was done for aqueous standards at ranges between 0.75 and 200 micromol/l, depending on the compound. Carnitine was quantified in urine and comparison with a radioenzymatic assay gave a satisfactory correlation (R2 = 0.981). The assay could be successfully applied to the diagnostic of pathological acylcarnitines profile of metabolic disorders in urines of patients suffering from different organic acidurias.     

MM3 parametrization of four‐ and five‐coordinated rhenium complexes by a genetic algorithm—Which factors influence the optimization performance?

Genetic algorithms (GA) were used to solve one of the multidimensional problems in computational chemistry, the optimization of force field parameters. The correlation between the composition of the GA, its parameters (p(c), p(m)) and the quality of the results were investigated. The composition was studied for all combinations of a Simple GA/Steady State GA with a Roulette Wheel/Tournament Selector using different values each for crossover (0.5, 0.7, 0.9) and mutation rates (0.01, 0.02, 0.05, 0.10, 0.20). The results show that the performance is strongly dependent on the GA scheme, where the Simple GA/Tournament Selector yields the best results. Two new MM3 parameters were introduced for rhenium compounds with coordination number four (204) and coordination number five (205), the formal oxidation states of rhenium ranging from +V to +VII. A manifold of parameters (Re-C, N, O, S) was obtained by using a diverse set of CSD structures. The advantage of the GA vs. UFF calculations is shown by comparison of several examples. The GA optimized parameters were able to reproduce the geometrical data of the X-ray structures.     

Dielectric Shielding of Ionic Charges in Aqueous Solutions of Different Ionic Strength

The thermodynamic functions of the proton transfer H₂tn²⁺+tn → 2 Htn⁺ (tn = 1,3-diaminopropane) have been determined in aqueous solutions containing different amounts of KCl (0.05 ? μ ? 3.01). The free energy (?ΔG) of the process decreases, whereas the enthalpy (-ΔH) increases with μ. There is reason to believe that the reaction is entirely controlled by the Coulomb forces between the two protonic charges. The electrostatic energy involved can be described in terms of a model incorporating an effective dielectric constant εe, such that δε_e/δμ and δ²ε_e/δμδT are both positive. The polarisation of pure water is produced by orientation of hydrogen-bonded dipole molecules H₂O, whereas the electrolyte solution is polarised in addition by dislocation of the ions K⁺ and Cl^?. Our results demonstrate that the former type of polarisation is much more temperature dependent than the latter.     

Bank of reference samples of blank urine from livestock

From three species of livestock, bovine, ovine and porcine, samples of urine from each 10–20 different animals were collected. The animals originated from a governmental experimental farm and differed in race, age, sex and were fed with different types of feed. Fifty different samples of urine were lyophilised in units of 5 mL in sealed amber glass bottles. After lyophilisation of the samples, several quality control tests were performed. The variation in net weight of the units of urine and the lyophilisates ranged from 0.01%–1.7% and 0.1%–10%, respectively. Most values did not exceed 0.1% for urines and 1% for lyophilisates. The residual water content of the lyophilisates was determined by the Karl-Fisher titration method. The average percentage of residual water ranged from 1.0%–7.0% for bovine, from 1.3%–3.0% for porcine and from 1.6%–5.5% for ovine urine lyophilisates. Further, all different samples were analysed for the presence of anabolic compounds with a multi-residue procedure developed at the CRL. In two samples of bovine urine the presence of α-boldenone was detected and confirmed. In most porcine urines the endogenous steroids α-testosterone and α-estradiol were detected. In a number of porcine and ovine urine samples α- and β-zearalenol were detected. The origin of these compounds is the f2-toxin produced by a Fusarium fungus. In ovine samples α-testosterone and α-estradiol were detected.     

Über die Korrelation von Ladungsdichte und chemischer Verschiebung in monosubstituierten Pyridinen

Zusammenfassung Es soll gezeigt werden, daß bei monosubstituierten Pyridinen aus der Anwendung der -Methode wesentlich bessere Korrelationen zwischen der Ladungsdichte und der chemischen Verschiebung der H-Atome resultieren als bei Verwendung des einfachen HMO-Modells.

---

Correlation of electron density and chemical shift in monosubstituted pyridines

It ought to be shown that the -method leads, compared with the HMO-model, to a much better agreement between electron density and chemical shift of the protons in monosubstituted pyridines.

---

---

Mit 8 Abbildungen

---

Herrn Dir. Dr. techn. Dr. rer. nat. h. c. Dr. phil. h. c.W. G. Stoll, J. R. Geigy AG, Basel, zum 60. Geburtstag gewidmet.     

Self-assembled monolayers of dendritic polyglycerol derivatives on gold that resist the adsorption of proteins

Highly protein-resistant, self-assembled monolayers (SAMs) of dendritic polyglycerols (PGs) on gold can easily be obtained by simple chemical modification of these readily available polymers with a surface-active disulfide linker group. Several disulfide-functionalized PGs were synthesized by N,N'-dicyclohexylcarbodiimide-mediated ester coupling of thioctic acid. Monolayers of the disulfide-functionalized PG derivatives spontaneously form on a semitransparent gold surface and effectively prevent the adsorption of proteins, as demonstrated by surface plasmon resonance (SPR) kinetic measurements. A structure-activity relationship relating the polymer architecture to its ability to effectuate protein resistance has been derived from results of different surface characterization techniques (SPR, attenuated total reflectance infrared (ATR-IR), and contact-angle measurements). Dendritic PGs combine the characteristic structural features of several highly protein-resistant surfaces: a highly flexible aliphatic polyether, hydrophilic surface groups, and a highly branched architecture. PG monolayers are as protein resistant as poly(ethylene glycol) (PEG) SAMs and are significantly better than dextran-coated surfaces, which are currently used as the background for SPR spectroscopy. Due to the higher thermal and oxidative stability of the bulk PG as compared to the PEG and the easy accessibility of these materials, dendritic polyglycerols are novel and promising candidates as surface coatings for biomedical applications.     

Practical ex-chiral-pool methodology for the synthesis of dopaminergic tetrahydroindoles

Chemo- and regioselective transformations of asparagine gave access to optically active 5- and 6-amino tetrahydroindolizines when the 3-aminobutyrolactone (S)-2 was employed as a key intermediate. The target compounds were approached by a sequential and regiocontrolled bis-electrophilic attack in the positions 2 and 3 of the pyrrole ring system. Receptor binding experiments showed stereocontrolled receptor recognition leading to the D3 selective agonist (S)-8 with D3 binding that is comparable to the natural neurotransmitter dopamine.     

Enantioselective Catalysis CXLI [1]. Tridentate Ligands with 1-(Pyridin-2-yl)ethylamine as Chiral Building Block in the Enantioselective Transfer Hydrogenation of Acetophenone

Summary.  A series of novel tridentate ligands with nitrogen and oxygen donor sites was synthesized starting from enantiomerically pure (S)- and (R)-1-(pyridin-2-yl)ethylamine, the preparation and resolution of which was developed. The new optically active ligands were tested as in situ catalysts together with Ru(PPh₃)₃Cl₂ in the enantioselective transfer hydrogenation of acetophenone with isopropanol. The secondary amine ligand (S)-2,4-di-tert-butyl-6-(1-(pyridin-2-yl)ethylamino)methylphenol gave the best results with almost quantitative conversion and 47%ee. Received August 17, 2001. Accepted August 27, 2001     

Regioselective coupling of pentafluorophenyl substituted alkynes: mechanistic insight into the zirconocene coupling of alkynes and a facile route to conjugated polymers bearing electron-withdrawing pentafluorophenyl substituents

The reaction of Cp(2)ZrCl(2) with 2 equiv of BuLi at -78 degrees C, followed by the addition of an unsymmetrical tetra- or pentafluorophenyl substituted alkyne R(1)C[triple bond]CAr(f) (R(1), Ar(f) = (CH(2))(4)Me, p-C(6)F(4)H; Me, p-C(6)F(4)H; Ph, C(6)F(5)), resulted in regioselective couplings of these alkynes to zirconacyclopentadienes in which the Ar(f) substituents preferentially adopt the 3,4-positions (beta beta) of the zirconacyclopentadiene ring. With Cp(2)Zr(py)(Me(3)SiC[triple bond]CSiMe(3)) as the zirconocene reagent, the couplings could be carried out at room temperature; however, at higher temperatures significant quantities of the 2,4-fluoroaryl substituted (alpha beta) isomers were also formed. None of the conditions employed produced the 2,5-fluoroaryl substituted (alpha alpha) isomers. These fluoroaryl-substituted zirconacyclopentadienes were readily converted to butadienes via reactions with acids. The zirconacyclopentadiene Cp(2)ZrC(4)-2,5-Ph(2)-3,4-(C(6)F(5))(2), which resulted from the coupling of PhC[triple bond]C(C(6)F(5)), was converted to the corresponding thiophene by reaction with S(2)Cl(2), and to an arene by reaction with MeO(2)CC[triple bond]CCO(2)Me/CuCl. Mechanistic studies on zirconocene couplings of (p-CF(3)C(6)H(4))C[triple bond]C(p-MeC(6)H(4)) indicate that the observed regioselectivities are determined by an electronic factor that controls the orientation of at least one of the two alkynes as they are coupled. Additionally, these studies suggest an unsymmetrical transition state for the zirconocene coupling of alkynes, and this is supported by DFT calculations. The reaction of [(C(6)F(5))C[triple bond]CCH(2)](2)CH(2) with Cp(2)Zr(py)(Me(3)SiC[triple bond]CSiMe(3)) resulted in a zirconacyclopentadiene in which the pentafluorophenyl substituents have been forced into the 2,5-positions (alpha alpha). Zirconocene coupling of the diyne (C(6)F(5))C[triple bond]C-1,4-C(6)H(4)-C[triple bond]C(C(6)F(5)) provided a route to conjugated polymers bearing electron-withdrawing pentafluorophenyl groups.