Composition of oxygen precipitates in Czochralski silicon wafers investigated by STEM with EDX/EELS and FTIR spectroscopy

In this work, we investigated the stoichiometry of oxygen precipitates in Czochralski silicon wafers. The thickness dependence of the Cliff–Lorimer sensitivity factor for the silicon/oxygen system was determined and applied for the investigation of the stoichiometry of oxygen precipitates by EDX. The results show that both plate‐like oxygen precipitates and a transitional form between plate‐like and octahedral precipi‐ tates consist of SiO₂. This was confirmed by EELS low loss spectra where the typical spectrum for amorphous SiO₂ was observed. Moreover, the absorption band of plate‐like precipitates at 1227 cm^–1 was found in the low temperature FTIR spectrum. It was demonstrated that this band can only be simulated by the dielectric constants of amorphous SiO₂. (© 2015 WILEY‐VCH Verlag GmbH &Co. KGaA, Weinheim)     

Quantitative and qualitative assessment of articular cartilage in the goat knee with magnetization transfer imaging

We investigated the role of collagen in the magnetization transfer (MT) effect in contrast to other macromolecules. By means of phantoms made of collagen, chondroitin sulfate (CS) and albumin, MR parameters have been optimized in order to reduce the acquisition time and improve the sensitivity, as well as to minimize the contributions from CS and albumin to the MT induced signal attenuation. The same method was used to study cartilage ex vivo (bovine articular and nasal cartilage plugs) and in vivo (goat knee femoral chondyle). In phantom samples, the MT signal attenuation depended on the collagen concentration while contributions from the other macromolecules were found to be minimal. In average, analysis of MT images revealed a 25%, 35% and 30% signal attenuation in 10% w/v type I collagen gels, cartilage plugs, and cartilage from the weight-bearing areas of the goat knee, respectively. Biochemical data revealed that treatment of cartilage plugs with bacterial collagenase led to collagen depletion and correspondingly to a decrease of the MT response. In contrast, trypsin-induced proteoglycan loss in cartilage plugs did not alter the MT effect. A significant correlation was observed between the collagen content in these plugs and their respective MT ratios and the rate constant k for the exchange process bound versus free water. Finally, data obtained from in vivo MT measurement of the goat knee demonstrated that intra-articular injection of papain might not only cause degradation of proteoglycans but also a change in collagen integrity in a dose-dependent manner. We conclude that in vivo measurement of MT ratios gives quantitative and qualitative information on the collagen status and may be applied for the routine evaluation of normal and abnormal articular cartilage.     

Tunnel magnetoresistance in alumina, magnesia and composite tunnel barrier magnetic tunnel junctions

Using magnetron sputtering, we have prepared Co-Fe-B/tunnel barrier/Co-Fe-B magnetic tunnel junctions with tunnel barriers consisting of alumina, magnesia, and magnesia-alumina bilayer systems. The highest tunnel magnetoresistance ratios we found were 73% for alumina and 323% for magnesia-based tunnel junctions. Additionally, tunnel junctions with a unified layer stack were prepared for the three different barriers. In these systems, the tunnel magnetoresistance ratios at optimum annealing temperatures were found to be 65% for alumina, 173% for magnesia, and 78% for the composite tunnel barriers. The similar tunnel magnetoresistance ratios of the tunnel junctions containing alumina provide evidence that coherent tunneling is suppressed by the alumina layer in the composite tunnel barrier.     

Phase-sensitive measurements of order parameters for ultracold atoms through two-particle interferometry

Nontrivial symmetry of order parameters is crucial in some of the most interesting quantum many-body states of ultracold atoms as well as condensed matter systems. Examples in cold atoms include p-wave Feshbach molecules and d-wave paired states of fermions that could be realized in optical lattices in the Hubbard regime. Identifying these states in experiments requires measurements of the relative phase of different components of the entangled pair wave function. We propose and discuss two schemes for such phase-sensitive measurements, based on two-particle interference revealed in atom-atom or atomic density correlations. Our schemes can also be used for relative phase measurements for nontrivial particle-hole order parameters, such as d-density wave order.     

Intra‐laser‐cavity microparticle sensing with a dual‐wavelength distributed‐feedback laser

An integrated intra‐laser‐cavity microparticle sensor based on a dual‐wavelength distributed‐feedback channel waveguide laser in ytterbium‐doped amorphous aluminum oxide on a silicon substrate is demonstrated. Real‐time detection and accurate size measurement of single micro‐particles with diameters ranging between 1 µm and 20 µm are achieved, which represent the typical sizes of many fungal and bacterial pathogens as well as a large variety of human cells. A limit of detection of ∼500 nm is deduced. The sensing principle relies on measuring changes in the frequency difference between the two longitudinal laser modes as the evanescent field of the dual‐wavelength laser interacts with micro‐sized particles on the surface of the waveguide. Improvement in sensitivity far down to the nanometer range can be expected upon stabilizing the pump power, minimizing back reflections, and optimizing the grating geometry to increase the evanescent fraction of the guided modes.     

Which stresses affect the glide of screw dislocations in bcc metals?

By direct application of stress in molecular statics calculations we identify the stress components that affect the glide of 1/2?111? screw dislocations in bcc tungsten. These results prove that the hydrostatic stress and the normal stress parallel to the dislocation line do not play any role in the dislocation glide. Therefore, the Peierls stress of the dislocation cannot depend directly on the remaining two normal stresses that are perpendicular to the dislocation but, instead, on their combination that causes an equibiaxial tension-compression (and thus shear) in the plane perpendicular to the dislocation line. The Peierls stress of 1/2?111? screw dislocations then depends only on the orientation of the plane in which the shear stress parallel to the Burgers vector is applied and on the magnitude and orientation of the shear stress perpendicular to the slip direction.