High electron mobility in solution-cast and vapor-deposited phenacyl-quaterthiophene-based field-effect transistors: toward N-type polythiophenes

New carbonyl-functionalized quaterthiophenes, 5,5' '-diperfluorophenylcarbonyl-2,2':5',2' ':5' ',2' '-quaterthiophene [DFCO-4T], 5,5' '-diphenyl-2,2':5',2' ':5' ',2' '-quaterthiophene [DPCO-4T], and a polymer having the same basic motif as DFCO-4T, poly{1,4-bis[(3'-n-octyl-2,2'-dithiophene)carbonyl]-2,3,5,6-tetrafluorobenzene} [P(COFCO-4T)], have been synthesized, characterized, and the crystal structures of the molecules determined. Field-effect transistors fabricated with vapor-deposited and solution-cast films of DFCO-4T exhibit very high Ion:Ioff current ratios (up to 108) and electron mobilities up to approximately 0.51 and approximately 0.25 cm2.V-1.s-1, respectively. Solution-cast blends of P(COFCO-4T) and DFCO-4T (1:1 weight ratio) exhibit an electron mobility of approximately 0.01 cm2.V-1.s-1 (Ion:Ioff = 104).     

Growth and properties of particulate Fe films vapor deposited in UHV on planar alumina substrates

An integrated experimental approach was used to prepare and characterize well-defined particulate deposits of Fe on a variety of planar Al₂O₃ supports. The Fe particles were vapor deposited in UHV on in-situ cleaned and characterized amorphous and single crystal alumina supports at controlled substrate temperatures and deposition rates. Integrated support and deposit properties were monitored in-situ by AES, XPS, and LEED; particle number densities and sizes were monitored by standard TEM. It was found thata) metal exposure is an insufficient and often misleading measure of particle size when the support surface properties are unknown or poorly controlled,b) judicious combination of depostion temperature and impingement flux lead to size- and number density-controlled particulate deposits of good thermal stability, which can be improved by annealing. Preliminary results of XPS and of CO-TPD and H₂-TPD measurements exhibiting particle size effects are also reported.     

Frustrated beta-chloride elimination. Selective arene alkylation by alpha-chloronorbornene catalyzed by electrophilic metallocenium ion pairs

Single-site polymerization catalysts generated in situ via activation of Cp*MMe(3) (Cp* = C(5)Me(5); M = Ti, Zr), (CGC)MMe(2) (CGC = C(5)Me(4)SiMe(2)NBu(t)(); M = Ti, Zr), and Cp(2)ZrMe(2) with Ph(3)C(+)B(C(6)F(5))(4)(-) catalyze alkylation of aromatic molecules (benzene, toluene) with alpha-chloronorbornene at room temperature, to regioselectively afford the 1:1 addition products exo-1-chloro-2-arylnorbornane (aryl = C(6)H(5) (1a), C(6)H(4)CH(3) (1b)) in good yields. Analogous deuterium-labeled products exo-1-chloro-2-aryl-d(n)-norbornane-7-d(1) (aryl-d(n) = C(6)D(5) (1a-d(6)), C(6)D(4)CD(3) (1b-d(8))) are obtained via catalytic arylation of alpha-chloronorbornene in either benzene-d(6) or toluene-d(8). Isolated ion-pair complexes such as (CGC)ZrMe(toluene)(+)B(C(6)F(5))(4)(-) and Cp(2)ThMe(+)B(C(6)F(5))(4)(-) also catalyze the reaction of alpha-chloronorbornene in toluene-d(8) to give 1b-d(8) in good yields, respectively. Small quantities of the corresponding bis(1-chloronorbornyl)aromatics 2 are also obtained from preparative-scale reactions. These reactions exhibit turnover frequencies exceeding 120 h(-1) (for the Cp*TiMe(3)/Ph(3)C(+)B(C(6)F(5))(4)(-)-catalyzed system), and chlorine-free products are not observed. Compounds 1 and 2 were characterized by (1)H, (2)H, (13)C, and 2D NMR, GC-MS, and elemental analysis. The aryl group exo-stereochemistry in 1a and 1b is established using (1)H-(1)H COSY, (1)H-(13)C HMBC, and (1)H-(1)H NOESY NMR, and is further corroborated by X-ray analysis of the product 1,4-bis(exo-1-chloro-2-norbornyl)benzene (2a). Control experiments and reactivity studies on each component step suggest a mechanism involving participitation of the metal electrophiles in the catalytic cycle.     

Determination of putrescine and cadaverine in seafood (finfish and shellfish) by liquid chromatography using pyrene excimer fluorescence

A liquid chromatography (LC) method is described for the easy determination of the biogenic diamines putrescine (PUT) and cadaverine (CAD) in canned tuna, frozen tuna loin, fresh mahimahi fillet, frozen raw shrimp, cooked lump crabmeat, and fresh and cold-smoked salmon. The method is also a useful screen for histamine (HTA). The method involves homogenization of fish tissue, extraction of biogenic amines into borate-trichloroacetic acid solution, centrifugation, and derivatization of supernatant with 1-pyrenebutanoic acid succinimidyl ester. The derivatized diamine species allow for the intramolecular excimer fluorescence of the pyrene moiety at a higher emission wavelength than is possible for the endogenous tissue monoamines, thus providing visual specificity of detection. All seafood species were fortified with 0.5, 1.0, 5.0, 10.0, and 15.0 microg/g (ppm) of PUT and CAD. Determination was based on standard graphs for PUT and CAD using peak areas with standard solutions equivalent to 0.375, 1.0, 5.0, 10.0, and 20.0 ppm in tissue. A set of five matrix controls (unfortified seafood tissue) were also analyzed; endogenous PUT was found in all samples except the canned tuna, and CAD found only in the shrimp, crab, and cold-smoked salmon. The background amines were thus subtracted prior to determining spike recovery. The intra-assay average recoveries ranged from 71 to 94% across species and spike levels.     

C2-symmetric bis(oxazolinato)lanthanide catalysts for enantioselective intramolecular hydroamination/cyclization

C(2)-symmetric bis(oxazolinato)lanthanide complexes of the type [(4R,5S)-Ph(2)Box]La[N(TMS)(2)](2), [(4S,5R)-Ar(2)Box]La[N(TMS)(2)](2), and [(4S)-Ph-5,5-Me(2)Box]La[N(TMS)(2)](2) (Box = 2,2'-bis(2-oxazoline)methylenyl; Ar = 4-tert-butylphenyl, 1-naphthyl; TMS = SiMe(3)) serve as precatalysts for the efficient enantioselective intramolecular hydroamination/cyclization of aminoalkenes and aminodienes. These new catalyst systems are conveniently generated in situ from the known metal precursors Ln[N(TMS)(2)](3) or Ln[CH(TMS)(2)](3) (Ln = La, Nd, Sm, Y, Lu) and 1.2 equiv of commercially available or readily prepared bis(oxazoline) ligands such as (4R,5S)-Ph(2)BoxH, (4S,5R)-Ar(2)BoxH, and (4S)-Ph-5,5-Me(2)BoxH. The X-ray crystal structure of [(4S)-(t)BuBox]Lu[CH(TMS)(2)](2) provides insight into the structure of the in situ generated precatalyst species. Lanthanides having the largest ionic radii exhibit the highest turnover frequencies as well as enantioselectivities. Reaction rates maximize near 1:1 BoxH:Ln ratio (ligand acceleration); however, increasing the ratio to 2:1 BoxH:Ln decreases the reaction rate, while affording enantiomeric excesses similar to the 1:1 BoxH:Ln case. A screening study of bis(oxazoline) ligands reveals that aryl stereodirecting groups at the oxazoline ring 4 position and additional substitution (geminal dimethyl or aryl) at the 5 position are crucial for high turnover frequencies and good enantioselectivities. The optimized precatalyst, in situ generated [(4R,5S)-Ph(2)Box]La[N(TMS)(2)](2), exhibits good rates and enantioselectivities, comparable to or greater than those achieved with chiral C(1)-symmetric organolanthanocene catalysts, even for poorly responsive substrates (up to 67% ee at 23 degrees C). Kinetic studies reveal that hydroamination rates are zero order in [amine substrate] and first order in [catalyst], implicating the same general mechanism for organolanthanide-catalyzed hydroamination/cyclizations (intramolecular turnover-limiting olefin insertion followed by the rapid protonolysis of an Ln-C bond by amine substrate) and implying that the active catalytic species is monomeric.     

Organolathanide-catalyzed regioselective intermolecular hydroamination of alkenes, alkynes, vinylarenes, di- and trivinylarenes, and methylenecyclopropanes. Scope and mechanistic comparison to intramolecular cyclohydroaminations

Organolanthanide complexes of the type Cp'(2)LnCH(SiMe(3))(2) (Cp' = eta(5)-Me(5)C(5); Ln = La, Nd, Sm, Lu) and Me(2)SiCp' '(2)LnCH(SiMe(3))(2) (Cp' ' = eta(5)-Me(4)C(5); Ln = Nd, Sm, Lu) serve as efficient precatalysts for the regioselective intermolecular hydroamination of alkynes R'Ctbd1;CMe (R' = SiMe(3), C(6)H(5), Me), alkenes RCH=CH(2) (R = SiMe(3), CH(3)CH(2)CH(2)), butadiene, vinylarenes ArCH=CH(2) (Ar = phenyl, 4-methylbenzene, naphthyl, 4-fluorobenzene, 4-(trifluoromethyl)benzene, 4-methoxybenzene, 4-(dimethylamino)benzene, 4-(methylthio)benzene), di- and trivinylarenes, and methylenecyclopropanes with primary amines R' 'NH(2) (R' ' = n-propyl, n-butyl, isobutyl, phenyl, 4-methylphenyl, 4-(dimethylamino)phenyl) to yield the corresponding amines and imines. For R = SiMe(3), R = CH(2)=CH lanthanide-mediated intermolecular hydroamination regioselectively generates the anti-Markovnikov addition products (Me(3)SiCH(2)CH(2)NHR' ', (E)-CH(3)CH=CHCH(2)NHR' '). However, for R = CH(3)CH(2)CH(2), the Markovnikov addition product is observed (CH(3)CH(2)CH(2)CHNHR' 'CH(3)). For internal alkynes, it appears that these regioselective transformations occur under significant stereoelectronic control, and for R' = SiMe(3), rearrangement of the product enamines occurs via tautomerization to imines, followed by a 1,3-trimethylsilyl group shift to stable N-SiMe(3)-bonded CH(2)=CMeN(SiMe(3))R' ' structures. For vinylarenes, intermolecular hydroamination with n-propylamine affords the anti-Markovnikov addition product beta-phenylethylamine. In addition, hydroamination of divinylarenes provides a concise synthesis of tetrahydroisoquinoline structures via coupled intermolecular hydroamination/subsequent intramolecular cyclohydroamination sequences. Intermolecular hydroamination of methylenecyclopropane proceeds via highly regioselective exo-methylene C=C insertion into Ln-N bonds, followed by regioselective cyclopropane ring opening to afford the corresponding imine. For the Me(2)SiCp' '(2)Nd-catalyzed reaction of Me(3)SiCtbd1;CMe and H(2)NCH(2)CH(2)CH(2)CH(3), DeltaH() = 17.2 (1.1) kcal mol(-)(1) and DeltaS() = -25.9 (9.7) eu, while the reaction kinetics are zero-order in [amine] and first-order in both [catalyst] and [alkyne]. For the same substrate pair, catalytic turnover frequencies under identical conditions decrease in the order Me(2)SiCp' '(2)NdCH(SiMe(3))(2) > Me(2)SiCp' '(2)SmCH(SiMe(3))(2) > Me(2)SiCp' '(2)LuCH(SiMe(3))(2) > Cp'(2)SmCH(SiMe(3))(2), in accord with documented steric requirements for the insertion of olefinic functionalities into lanthanide-alkyl and -heteroatom sigma-bonds. Kinetic and mechanistic evidence argues that the turnover-limiting step is intermolecular C=C/Ctbd1;C bond insertion into the Ln-N bond followed by rapid protonolysis of the resulting Ln-C bond.     

Wide bandgap OPV polymers based on pyridinonedithiophene unit with efficiency >5%

We report the properties of a new series of wide band gap photovoltaic polymers based on the N-alkyl 2-pyridone dithiophene (PDT) unit. These polymers are effective bulk heterojunction solar cell materials when blended with phenyl-C₇₁-butyric acid methyl ester (PC₇₁BM). They achieve power conversion efficiencies (up to 5.33%) high for polymers having such large bandgaps, ca. 2.0 eV (optical) and 2.5 eV (electrochemical). Grazing incidence wide-angle X-ray scattering (GIWAXS) reveals strong correlations between π–π stacking distance and regularity, polymer backbone planarity, optical absorption maximum energy, and photovoltaic efficiency.     

黄渤海近岸海域酚类内分泌干扰物分布特征及其来源解析

在黄渤海近岸海域采集了34个水体样品,利用HPLC-MS/MS分析了双酚A、辛基酚、壬基酚、2,4-二氯酚、对叔丁基苯酚和对特辛基苯酚等6种酚类内分泌干扰物的含量,并探讨了其分布特征及来源.结果表明,中国北部近岸海域6种酚类内分泌干扰物的含量范围在5.25～1351.20ng/mL之间.结合因子分析和层次聚类分析结果,说明渤海、黄海近岸海域中酚类化合物主要以辛基酚、壬基酚、2,4-二氯酚为主,局部海域伴有双酚A的高残留;从整个海域范围看,黄渤海近岸海域水体中酚类化合物污染状况具有区域特征,整体呈现出南高北低的特点,且酚类物质分布具有明显的地区特性,一定程度上具有聚集性;来源解析结果表明黄渤海近岸海域中酚类内分泌干扰物主要来源为生活污水和工业废水.     

气相色谱法测定海洋沉积物中十氯酮残留

研究了提取溶剂效率、毛细管柱极性、净化条件及共溶出干扰物等因素对十氯酮测定的影响;对比了加速溶剂提取及超声波提取方式,考察了DB-17、DB-1701与DB-5毛细管柱分离度,及不同比例甲醇/正己烷混合溶液作为定容溶液的分析结果。建立了加速溶剂萃取,H2SO4净化分离,DB-5毛细管柱电子捕获检测器(ECD)-气相色谱法(GC)测定海洋沉积物介质中有机氯农药类持久性有机污染物十氯酮残留分析方法。将5 g沉积物干样与3 g活化铜粉及3 g无水Na2SO4混匀后,采用二氯甲烷-丙酮(1∶1,V/V)进行加速溶剂萃取;萃取液浓缩后,用H2SO4净化,以1%甲醇-正己烷混合溶液定容后,采用DB-5非极性毛细管柱,及配备电子捕获检测器气相色谱测定十氯酮含量。本方法采用外标法进行定量分析,在0.005～0.1 mg/L浓度范围内,线性相关系数为0.9989;加标回收率为75%～98%;相对标准偏差为3.7%～9.6%(n=6);检出限为0.12 ng/g。