Alkenylsilane effects on organotitanium-catalyzed ethylene polymerization. Toward simultaneous polyolefin branch and functional group introduction

The comonomer 5-hexenylsilane is introduced into organotitanium-mediated ethylene polymerizations to produce silane-terminated ethylene/5-hexenylsilane copolymers. The resulting polymers were characterized by 1H and 13C NMR, GPC, and DSC. High activities (up to 107 g polymer/(mol Ti.atm ethylene.h)) and narrow polydispersities are observed in the polymerization/chain transfer process. Ethylene/5-hexenylsilane copolymer molecular weights are found to be inversely proportional to 5-hexenylsilane concentration, supporting a silanolytic chain transfer mechanism. Control experiments indicate that chain transfer mechanism by 5-hexenylsilane is significantly more efficient than that of n-hexylsilane for organotitanium-mediated ethylene polymerization. The present study represents the first case in which a functionalized comonomer is efficiently used to effect both propagation and chain transfer chemistry during olefin polymerization.     

Strategies for electrooptic film fabrication. Influence of pyrrole-pyridine-based dibranched chromophore architecture on covalent self-assembly, thin-film microstructure, and nonlinear optical response

The new dibranched, heterocyclic "push-pull" chromophores bis{1-(pyridin-4-yl)-2-[2-(N-methylpyrrol-5-yl)]ethane}methane (1), 1-(pyrid-4-yl)-2-(N-methyl-5-formylpyrrol-2-yl)ethylene (2), {1-(N-methylpyridinium-4-yl)-2-[2-(N-methylpyrrol-5-yl)]ethane}{(1-(pyridin-4-yl)-2-[2-(N-methylpyrrol-5-yl)]ethane}methane (3), N-methyl-2-[1-(N-methylpyrid-4-yl)ethen-2-yl]-5-[pyrid-4-yl]ethen-2-yl]pyrrole iodide (4), bis{1-(N-methyl-4-pyridinio)-2-[2-(N-methylpyrrol-5-yl)]ethane}methane iodide (5), and N-methyl-2,5-[1-(N-methylpyrid-4-yl)ethen-2-yl]pyrrole iodide (6) have been synthesized and characterized. The neutral (1 and 2) and monomethyl salts (3 and 4) undergo chemisorptive reaction with iodobenzyl-functionalized surfaces to afford chromophore monolayers SA-1/SA-2 and SA-3/SA-4, respectively. Molecular structures and other physicochemical properties have been defined by (1)H NMR, optical spectroscopy, and XRD. Thin-film characterization by a variety of techniques (optical spectroscopy, specular X-ray reflectivity, atomic force microscopy, X-ray photoelectron spectroscopy, and angle-dependent polarized second harmonic generation) underscore the importance of the chromophore molecular architecture as well as film growth method on film microstructure and optical/electrooptic response.     

Gate dielectric chemical structure-organic field-effect transistor performance correlations for electron, hole, and ambipolar organic semiconductors

This study describes a general approach for probing semiconductor-dielectric interfacial chemistry effects on organic field-effect transistor performance parameters using bilayer gate dielectrics. Organic semiconductors exhibiting p-/n-type or ambipolar majority charge transport are grown on six different bilayer dielectric structures consisting of various spin-coated polymers/HMDS on 300 nm SiO(2)/p(+)-Si, and are characterized by AFM, SEM, and WAXRD, followed by transistor electrical characterization. In the case of air-sensitive (generally high LUMO energy) n-type semiconductors, dielectric surface modifications induce large variations in the corresponding OTFT performance parameters although the film morphologies and microstructures remain similar. In marked contrast, the device performance of air-stable n-type and p-type semiconductors is not significantly affected by the same dielectric surface modifications. Among the bilayer dielectric structures examined, nonpolar polystyrene coatings on SiO(2) having minimal gate leakage and surface roughness significantly enhance the mobilities of overlying air-sensitive n-type semiconductors to as high as approximately 2 cm(2)/(V s) for alpha,omega-diperfluorohexylcarbonylquaterthiophene polystyrene/SiO(2). Electron trapping due to silanol and carbonyl functionalities at the semiconductor-dielectric interface is identified as the principal origin of the mobility sensitivity to the various surface chemistries in the case of n-type semiconductors having high LUMO energies. Thiophene-based n-type semiconductors exhibiting similar film morphologies and microstructures on various bilayer gate dielectrics therefore provide an incisive means to probe TFT performance parameters versus semiconductor-dielectric interface relationships.     

Novel carboxylated pyrrole- and carbazole-based monomers. Synthesis and electro-oxidation features

Carboxylated pyrrole (Pyr, a index)- and carbazole (Cbz, b index)-containing monomers 6-7a/b and 9a/b have been readily synthesized from the monobenzyl ester of L-glutamic acid and triamine 2 using Clauson-Kaas and amide coupling reactions. In contrast to Pyr-containing compounds 6-7a, and 9a, the three Cbz-containing monomers 6-7b, and 9b have been found electroactive and were successfully electropolymerized on a Pt electrode resulting in the deposition of corresponding insoluble electroconducting polyCOOH polyCbz-films poly(6-7b) and poly(9b).     

Impact of interstitial air holes on a wide-bandwidth rejection filter made from a photonic crystal fiber

We have investigated the spectral properties of a band rejection filter made with a long-period fiber grating written in photonic crystal fiber that has interstitial air holes. Experiments showed that only one mode was coupled strongly to the fundamental core mode over a 600 nm spectral range. The central wavelength of the filter could be tuned over that range without being appreciably affected by any other mode. By using the multipole method, we found that the interstitial air holes of the photonic crystal fiber played a critical role in limiting the number of modes that could strongly interact with the fundamental mode and in obtaining well-separated resonance peaks. Excellent agreement between theory and experiment was obtained.     

High-spectral-resolution coherent anti-Stokes Raman scattering with interferometrically detected broadband chirped pulses

To achieve high-spectral-resolution multiplex coherent anti-Stokes Raman scattering (CARS), one typically uses a narrowband pump pulse and a broadband Stokes pulse. This is to ensure a correspondence between anti-Stokes and vibrational frequencies. We obtain high-resolution CARS spectra of isopropanol, using a broadband chirped pump pulse and a broadband Stokes pulse, by detecting the anti-Stokes pulse with spectral interferometry. With the temporally resolved anti-Stokes signal, we can remove the chirp of the anti-Stokes pulse and restore high spectral resolution while also rejecting nonresonant scattering.     

Competition between singlet fission and charge separation in solution-processed blend films of 6,13-bis(triisopropylsilylethynyl)pentacene with sterically-encumbered perylene-3,4:9,10-bis(dicarboximide)s

The photophysics and morphology of thin films of N,N-bis(2,6-diisopropylphenyl)perylene-3,4:9,10-bis(dicarboximide) (1) and the 1,7-diphenyl (2) and 1,7-bis(3,5-di-tert-butylphenyl) (3) derivatives blended with 6,13-bis(triisopropylsilylethynyl)pentacene (TIPS-Pn) were studied for their potential use as photoactive layers in organic photovoltaic (OPV) devices. Increasing the steric bulk of the 1,7-substituents of the perylene-3,4:9,10-bis(dicarboximide) (PDI) impedes aggregation in the solid state. Film characterization data using both atomic force microscopy and X-ray diffraction showed that decreasing the PDI aggregation by increasing the steric bulk in the order 1 < 2 < 3 correlates with a decrease in the density/size of crystalline TIPS-Pn domains. Transient absorption spectroscopy was performed on ~100 nm solution-processed TIPS-Pn:PDI blend films to characterize the charge separation dynamics. These results showed that selective excitation of the TIPS-Pn results in competition between ultrafast singlet fission ((1*)TIPS-Pn + TIPS-Pn → 2 (3*)TIPS-Pn) and charge transfer from (1*)TIPS-Pn to PDIs 1-3. As the blend films become more homogeneous across the series TIPS-Pn:PDI 1 → 2 → 3, charge separation becomes competitive with singlet fission. Ultrafast charge separation forms the geminate radical ion pair state (1)(TIPS-Pn(+?)-PDI(-?)) that undergoes radical pair intersystem crossing to form (3)(TIPS-Pn(+?)-PDI(-?)), which then undergoes charge recombination to yield either (3*)PDI or (3*)TIPS-Pn. Energy transfer from (3*)PDI to TIPS-Pn also yields (3*)TIPS-Pn. These results show that multiple pathways produce the (3*)TIPS-Pn state, so that OPV design strategies based on this system must utilize this triplet state for charge separation.     

Computer experiment and global optimization of layered monocentric lens systems

In this paper we derive a general analytical solution for a monocentric lens system and present a global optimization method combining sequential design for global optimization and an expected improvement algorithm for global optimization for the design and analysis of a layered monocentric lens system, which provides an “intelligent” way to search the optimization space based on accumulated experience. We then apply these methods to an example of monocentric lens design, and explore the improvement in system performance obtained through increasing the system volume.     

Nonequilibrium route to nanodiamond with astrophysical implications

Nanometer-sized diamond grains are commonly found in primitive chondritic meteorites, but their origin is puzzling. Using evidence from atomistic simulation, we establish a mechanism by which nanodiamonds form abundantly in space in a two-stage process involving condensation of vapor to form carbon onions followed by transformation to nanodiamond in an energetic impact. This nonequilibrium process is consistent with common environments in space and invokes the fewest assumptions of any proposed model. Accordingly, our model can explain nanodiamond formation in both presolar and solar environments. The model provides an attractive framework for understanding noble gas incorporation and explains all key features of meteoritic nanodiamond, including size, shape, and polytype. By understanding the creation of nanodiamonds, new opportunities arise for their exploitation as a powerful astrophysical probe.     

Water adsorption on SrTiO3(001): II. Water,water, everywhere

The role of water adsorption on Ti-rich SrTiO₃(001) surface reconstructions is studied. Density functional calculations with hybrid functionals of numerous adsorption configurations indicate that the relative stability of the different reconstructions is strongly altered by the addition of water, with all the reconstructions having comparable energy for half-monolayer coverage, most with a fair degree of hydrogen bonding. This strongly suggests that which reconstruction is observed depends upon a competition between the kinetics of ordering and dehydration. X-ray photoelectron spectra are consistent with the theoretical predictions for the dehydration of the 2 × 1 and c(4 × 2) reconstructions.