A hexa-peri-hexabenzocoronene cyclophane: an addition to the toolbox for molecular electronics

Cyclophanes with the largest-to-date polycyclic aromatic hydrocarbon (hexa-peri-hexabenzocoronene, HBC) to be entrained in such a structural motif are reported. The two disks are covalently captured by intermolecular ring-closing olefin metathesis of dienes in good yield. DSC, optical microscopy, and WAXD show the new cyclophanes to self-assemble to thermotropic columnar liquid crystal mesophases similar to monomeric analogues. Solution spectroscopic studies reveal that the two disks within a single unit lie face-to-face, with a small average lateral offset. Self-assembly into two-dimensional crystals at a solid-liquid interface was visualized by STM, and the electrical properties of single molecules were assessed by scanning tunneling spectroscopy revealing a diode-like behavior which is similar to that previously reported for single HBC disks, laying the groundwork for future electrical interrogations of dynamic molecular complexes.     

High resolution mass spectrometric studies of some bicyclic γ-lactones

The mass spectra of three bicyclic γ-lactones have been studied, and the fragmentation pathways have been proposed with the aid of accurate mass measurements and metastable transitions. An unusually low [M ? CH₃] ion and the presence of an abundant [M ? C₅H₉] ion in the mass spectrum of dihydroactinidiolide were interpreted as a possible rearrangement involving a methyl migration. The eliminations of methyl radical, carbon monoxide and ketene are important processes in many cases.     

Tris(acetonitrile)tricarbonylchromium(0) catalyzed 1,4-addition of hydrogen to 1,3-dienes

The Cr(CO)₃(CH₃CN)₃ complex is found to catalyze the 1,4-addition of hydrogen to 1,3-dienes such as 2-methyl-1,3-butadiene, trans-1,3-pentadiene, and trans, trans-2,4-hexadiene at low temperature (40°) and low H₂ pressure (20 psi). For trans, trans-2,4-hexadiene the only product obtained when D₂ is used is 2,5-dideuterio-cis-3-hexene. The catalytic 1,4-hydrogenation can be carried out in neat dienes, and turnover numbers for the catalyst of greater than 3000 have been observed.     

Gold nanoshells on polystyrene cores for control of surface plasmon resonance

A method is presented for synthesizing core-shell structures consisting of monodisperse polystyrene latex nanospheres as cores and gold nanoparticles as shells. Use of polystyrene spheres as the core in these structures is advantageous because they are readily available commercially in a wide range of sizes, and with dyes or other molecules doped into them. Gold nanoparticles, ranging in size from 1 to 20 nm, are prepared by reduction of a gold precursor with sodium citrate or tetrakis(hydroxymethyl)phosphonium chloride (THPC). Carboxylate-terminated polystyrene spheres are functionalized with 2-aminoethanethiol hydrochloride (AET), which forms a peptide bond with carboxylic acid groups on their surface, resulting in a thiol-terminated surface. Gold nanoparticles then bind to the thiol groups to provide up to about 50% coverage of the surface. These nanoparticles serve as seeds for growth of a continuous gold shell by reduction of additional gold precursor. The shell thickness and roughness can be controlled by the size of the nanoparticle seeds as well as by the process of their growth into a continuous shell. By variation of the relative sizes of the latex core and the thickness of the gold overlayer, the plasmon resonance of the nanoshell can be tuned to specific wavelengths across the visible and infrared range of the electromagnetic spectrum, for applications ranging from the construction of photonic crystals to biophotonics. The position and width of the plasmon resonance extinction peak are well-predicted by extended Mie scattering theory.     

Synthetic applications of aryl radical building blocks for cyclisation onto azoles

2-(2-Bromophenyl)ethyl groups have been used as building blocks in radical cyclisation reactions onto azoles to synthesise tri- and tetra-cyclic heterocycles. 2-(2-Bromophenyl)ethyl methanesulfonate was used to alkylate azoles (imidazoles, pyrroles, indoles and pyrazoles) for the synthesis of the radical precursors. Cyclisations of the intermediate aryl radicals yield new 6-membered rings attached to the azoles. The aryl radicals undergo intramolecular homolytic aromatic substitution onto the azole rings. Tributylgermanium hydride has been used with success to replace the toxic and troublesome tributyltin hydride. Initial studies show that the protocol can be used on solid phase resins. The molecular and crystal structures of methyl 5,6-dihydroimidazo[5,1-a]iso-quinoline-1-carboxylate and methyl 5,6-dihydroimidazo[2,1-a]isoquinoline-3-carboxylate were determined by X-ray crystallography.     

Transfection mediated by gemini surfactants: engineered escape from the endosomal compartment

The structure of the lipoplex formed from DNA and the sugar-based cationic gemini surfactant 1, which exhibits excellent transfection efficiency, has been investigated in the pH range 8.8-3.0 utilizing small-angle X-ray scattering (SAXS) and cryo-electron microscopy (cryo-TEM). Uniquely, three well-defined morphologies of the lipoplex were observed upon gradual acidification: a lamellar phase, a condensed lamellar phase, and an inverted hexagonal (H(II)) columnar phase. Using molecular modeling, we link the observed lipoplex morphologies and physical behavior to specific structural features in the individual surfactant, illuminating key factors in future surfactant design, viz., a spacer of six methylene groups, the presence of two nitrogens that can be protonated in the physiological pH range, two unsaturated alkyl tails, and hydrophilic sugar headgroups. Assuming that the mechanism of transfection by synthetic cationic surfactants involves endocytosis, we contend that the efficacy of gemini surfactant 1 as a gene delivery vehicle can be explained by the unprecedented observation of a pH-induced formation of the inverted hexagonal phase of the lipoplex in the endosomal pH range. This change in morphology leads to destabilization of the endosome through fusion of the lipoplex with the endosomal wall, resulting in release of DNA into the cytoplasm.     

Solid-phase synthesis of a tyrphostin ether library

The solid-phase synthesis of a 4500-member (30 x 15 x 10) tyrphostin library is demonstrated utilizing the Irori-directed sorting system. Fmoc-protected PL-Rink resin was used as the solid support. After Fmoc-deprotection, aryl aldehydes were attached to the resin through reductive amination. Acylation of the resulting secondary amines with cyanoacetic acid was followed by a Knoevenagel condensation with phenolic aldehydes. Mitsunobu coupling of primary alcohols to the resin-bound phenols yielded the final library of compounds 1.     

Ruthenium bipyridyl compounds with two terminal alkynyl ligands

Compounds of the form Ru(X2bipy)(PPh3)2(-C triple bond CC6H4NO2-p)2(X2bipy = 4,4'-X(2)-2,2'-bipyridine, X = Me 3a, Br 3b, I 3c) have been synthesised from the mono-alkynyl precursors Ru(X2bipy)(PPh3)2(-C triple bond CC6H4NO2-p)Cl (X = Me 2a, Br 2b, I 2c); the former are the first ruthenium bis-alkynyl compounds that also contain a bipyridyl ligand. Spectroelectrochemical investigation of 3a shows that the metal is readily oxidised to form the ruthenium(III) compound 3a+, and will also undergo a single-electron reduction at each nitro group to form 3a2-. ESR and UV/visible spectra of these redox congeners are presented. We also report the synthesis of [Ru(Me2bipy)(PPh3)2(-C triple bond CBut)(N triple bond N)][PF6] during the attempted synthesis of Ru(Me2bipy)(PPh3)2(-C triple bond CBut)2, and report its X-ray crystal structure and IR spectrum. X-Ray crystal structures of 3b and 3c(as two different solvates) are presented, and the nature of the intermolecular interactions seen therein is discussed. Z-Scan measurements on Ru(Me2bipy)(PPh3)2(-C triple bond CR)Cl (R = C6H4NO2-p2a, But, Ph, C6H4Me) are also reported, and show that Ru(Me2bipy)(PPh3)2(-C triple bond CR)Cl (R = C6H4NO2-p2a, Ph) exhibit moderate third-order non-linearities.     

Capillary electrochromatography using polyelectrolyte multilayer coatings

This review covers recent progress in polyelectrolyte multilayer (PEM) coatings applied to analytical separations using open-tubular capillary electrochromatography (OT-CEC). The simple preparation procedure involved in the PEM approach has provided some attractive features over other modes of capillary electrophoresis-based separations including packed column capillary electrochromatography (PC-CEC) and micellar electrokinetic chromatography (MEKC). PEM coatings have been used to alleviate the adsorption of basic analytes, to improve separations, and to improve the stability of the electroosmotic flow. Fundamental aspects of PEM coatings on surfaces and analytical separation platforms are briefly outlined in this review. In addition, applications of PEM coatings to fused-silica capillaries or microchip separation devices for the separation of small achiral or chiral analytes, as well as large biomolecules, are discussed.     

Simultaneous measurement of glucose and glutamine in aqueous solutions by near infrared spectroscopy

A method is described for measuring the concentrations of both glucose and glutamine in binary mixtures from near infrared (NIR) absorption spectra. Spectra are collected over the range from 5000–4000/cm (2.0–2.5μm) with a 1-mm optical path length. Glucose absorbance features at 4710, 4400, and 4300/cm and glutamine features at 4700, 4580, and 4390/cm provide the analytical information required for the measurement. Multivariate calibration models are generated by using partial least squares (PLS) regression alone and PLS regression combined with a preprocessing digital Fourier filtering step. The ideal number of PLS factors and spectral range are identified separately for each analyte. In addition, the optimum Fourier filter parameters are established for both compounds. The best overall analytical performance is obtained by combining Fourier filtering and PLS regression. Glucose measurements are established over the concentration range from 1.66–59.91 mM, with a standard error of prediction (SEP) of 0.32 mM and a mean percent error of 1.84%. Glutamine can be measured over the concentration range from 1.10–30.65 mM with a SEP of 0.75 mM and a mean percent error of 6.67%. These results demonstrate the analytical utility of NIR spectroscopy for monitoring glucose and glutamine levels in mammalian and insect cell cultures.