Illumination of the shadow zone in a two-channel oceanic waveguide with a fine structure of sound speed inhomogeneities

The experimental data on the sound field structure, which were obtained by emitting a continuous pseudonoise signal (a midfrequency of 3.2 kHz) in a two-channel oceanic waveguide, are compared with the calculations performed by the wave program with allowance for the fine structure of the sound speed inhomogeneities. A considerable increase in the intensity of the sound field with a definite angular spectrum is observed in the upper channel in the first shadow zone, and, in the experiment, the increase begins nearer to the sound source than predicted by the wave and ray calculations for a smooth sound speed profile. These features of the field structure are explained by the illumination of the shadow zone by the regular scattering of signals from highly anisotropic fine-structure inhomogeneities of the sound speed profile, which are clearly pronounced in the region of the given oceanic experiment.     

Ultrasonic attenuation in a LiIO3 crystal

The temperature dependences of the attenuation of longitudinal acoustic waves along the x axis of a LiIO₃ crystal are studied experimentally by the method of Bragg diffraction of light by ultrasound. The measurements are performed in the temperature range from 215 to 335 K at frequencies of 400–690 MHz. Above 260 K, the attenuation is found to exhibit a frequency-independent growth of a relaxational character, which is used to calculate the enthalpy of the activation of ionic motion in the direction normal to the hexagonal axis. In addition, resonance attenuation peaks are observed; as the frequency increases, the peaks are shifted toward lower temperatures. A phenomenological model is proposed to explain the origin of the resonance absorption.     

Synchrotron radiation total reflection X-ray fluorescence (SR-TXRF) for evaluation of food contamination

Summary The objective of this study was to use synchrotron radiation total reflection X-ray fluorescence analysis (SR-TXRF) for the determination of metals and other elements in food available to the population in commercial establishments, in order to evaluate the risks of contamination by these products. The analyzed species were vegetables, leafy vegetables, fruits, cereal and grain. The results indicated that some species were contaminated by Cr, Cu, Zn and Pb with concentrations much higher than the reference values.     

Mean curvature flow with a forcing term in minkowski space

We study the forced mean curvature flow of graphs in Minkowski space and prove longtime existence of solutions. When the forcing term is a constant, we prove convergence to either a constant mean curvature hypersurface or a translating soliton – depending on the boundary conditions at infinity. It is a pleasure to thank my PhD advisors Klaus Ecker and Gerhard Huisken for their assistance and encouragement. I also thank Maria Athanassenas, Oliver Schnürrer and Marty Ross for their interest and useful comments, and the Max Planck Gesellschaft for financial support.     

Excess noise peaks in porous silicon-based diode structures

Results of an experimental observation of the voltage oscillations associated with a discrete tunneling of holes in porous silicon at room temperature are presented. The noise characteristics of diode structures with a porous silicon interlayer formed on heavily boron-doped silicon single crystals are studied. Peaks of excessive noise are observed at frequencies of ～1 MHz, at which single-electron oscillations should be expected. The peak noise power is found to increase with current according to the ～2.5 power law and, at a current density of 0.15 A/cm², to exceed the noise power of the receiver by three to four orders of magnitude. The complex shape of the noise spectrum and its extension to the higher frequency region with increasing current are explained by the three-dimensionality of the system of nanometer-sized silicon grains embedded in insulating silicon dioxide of porous silicon.     

Synthesis of 2H-pyrroles via the 1,3-dipolar cycloaddition reaction of nitrile ylides with acrylamides

3,4-Dihydro-2H-pyrrole derivatives were synthesized by the 1,3-dipolar cycloaddition reaction of nitrile ylides with acrylamides. Acrylamide substitution patterns and benzimidoyl chloride equilibration were investigated.     

High resolution electronic study of ONO, ONO and ONO: A rovibronic survey covering 11 800-14 380 cm

The 11 800-14 380 cm⁻¹ frequency range has been scanned for rotationally resolved rovibronic transitions in the A²B₂-X²A₁ electronic band system of the symmetric (C_2v) ¹⁶O¹⁴N¹⁶O and ¹⁸O¹⁴N¹⁸O isotopologues and in the corresponding electronic band system of the asymmetric (C_s) ¹⁸O¹⁴N¹⁶O isotopologue. The rotational analysis—reflecting minor differences in mass—in combination with symmetry induced spectral differences allows an identification of 68 ¹⁶O¹⁴N¹⁶O vibronic levels, 26 ¹⁸O¹⁴N¹⁸O vibronic levels and 51 ¹⁸O¹⁴N¹⁶O vibronic levels. The bands are recorded using near infrared fluorescence spectroscopy and a piezo valve based pulsed molecular beam expansion of premixed ¹⁸O₂ and ¹⁴N¹⁶O in Ar. The majority of the observed bands is rotationally assigned and can be identified as transitions starting from the vibrational ground state of one of the isotopologues. Numerous hot bands have also been identified. A comparison of the overall spectroscopic features of C_2v vs. C_s symmetric species provides qualitative information on symmetry dependence of vibronic couplings.     

Adhesion studies of latex film surfaces on the meso- and nanoscale

In this paper the effects of surface roughness and annealing temperature (T) of latex coating films on adhesion are discussed for the different stages of the film formation process. The surface free energy of latex films was assessed in terms of practical work of adhesion (W) (or adherence) using a custom-built adhesion-testing device (ATD), atomic force microscopy (AFM), and contact angle measurements. For preannealed latex films surface roughness averages (R_a) were determined from AFM height images and were related to the values of W obtained from ATD measurements at room temperature. The results obtained using these tests exhibiting surface behavior on different length scales indicate a dependence of the measured adhesion on surface roughness and temperature, as well as on the length scale of the measurements.First preannealed samples were studied, which were obtained by heat treatment above the respective glass transition temperatures (T_g). Increasing the temperature of preannealing resulted in a decrease of the adherence observed in ATD experiments at room temperature. However, on the nanoscale, using AFM, no significant variation of the adherence was observed. This observation can be explained by roughness arguments. Preannealing decreases roughness which results in lower adherence values measured by ATD while for essentially single asperity AFM experiments roughness has an insignificant effect. Specimens were also annealed over a constant period of time (90 min) at different temperatures. At the end of the heat treatment, adhesion was measured at the treatment temperature by ATD. The amplified effect of temperature observed in this case on adherence is attributed to the combination of roughness decrease and increasing test temperature. In a third set of experiments completely annealed samples were studied by ATD as well as by AFM as a function of temperature. With increasing T values ATD showed a decrease in adherence, which is attributed to a decreasing surface free energy of the annealed films at elevated T values. AFM, on the other hand, showed an opposite trend which is assigned to increasing penetration of the tip into the tip/wetting polymer samples versus increasing temperature. Finally, annealing isotherms as a function of time were investigated by ATD in situ at different temperatures. This last set of experiments allowed us to optimize annealing time and temperature to achieve complete curing.