Fluorescence quenching of alternant and non-alternant polycyclic hydrocarbons by electron transfer

Rate constants of fluorescence quenching by electron acceptors are greater for alternant than for non-alternant hydrocarbons with equal E_oo. The reverse is true for quenching by electron donors. This is consistent with the lowering of the π-orbital energies of non-alternant compared to alternant polycyclic hydrocarbons of equal E_oo.     

A new approach for the detection of carbon-centered radicals in enzymatic processes using prefluorescent probes

In this communication we propose a novel application for prefluorescent probes in the detection of free carbon-centered radicals in enzymatic processes. Prefluorescent probes combine a fluorescent moiety tethered to a paramagnetic nitroxide that acts as a fluorescence quencher. Trapping of a radical by the nitroxide group restores the fluorescence properties. The increase in fluorescence intensity with time reflects the formation and quenching of carbon-centered radicals and can be used for the quantitative evaluation of yields and kinetics. As a test system we used horseradish peroxidase, an oxidoreductase that is widely accepted to operate by a radical-mediated mechanism. We used the prefluorescent probe (quinoline-TEMPO), where a quinoline moiety has been tethered to 2,2,6,6-tetramethylpiperidin-1-oxyl.     

Configuration and E/Z interconversion mechanism of O(S)-allyl-S(O)-methyl-N-(acridin-9-yl) iminothiocarbonate

The configuration and dynamic behavior of O-allyl-S-methyl-N-(acridin-9-yl)iminothiocarbonate (1) and its S-allyl-O-methyl regioisomer (2) were studied using quantum chemical calculations and by applying a novel graphical method to scatter maps obtained from MD simulations for evaluation of an NOE-weighted internuclear distance (r(NOE)). Energy calculations indicated that the Z configuration was predominant for each compound and, further, this was supported both by the calculated chemical shifts and the r(NOE). Both N-inversion- and rotation-type transition-state structures were also calculated for the E/Z isomerization process, the results indicating that the preferred interconversion mechanism for 1 is N-inversion, but contrastingly, interconversion via rotation is equally as probable as N-inversion for 2. This supports the notion that one or the other or both pathways can be active and each system needs to be assessed on a case-by-case basis.     

Kinetic studies of dicopper complexes in catechol oxidase model reaction by using an approximationless evaluating method

The oxidation of 3,5-di-tert-butylcatechol to 3,5-di-tert-butyl-o-benzoquinone catalyzed by dinuclear copper(II) complexes {[Cu₂(L¹)(CF₃SO₃)₂(H₂O)₄]-(CF₃SO₃)₂ (1) and [Cu₂(L²O)](CF₃SO₃)₂ (2)| has been investigated in methanol saturated with O₂ at ambient temperature. Detailed kinetic studies were carried out and for the treatment the fitting software ZiTa was applied. On the basis of the results in the kinetic studies a possible mechanism of the catalytic reaction is proposed.This revised version was published online in December 2005 with corrections to the Cover Date.     

Electron impact and single photon ionization cross sections of neutral silver clusters

Neutral silver atoms and small clusters Ag _n (n=1...4) were generated by sputtering, i.e. by bombarding a polycrystalline silver surface with Ar⁺ ions of 5 keV. The sputtered particles were ionized by a crossed electron beam and subsequently detected by a quadrupole mass spectrometer. In alternative to the electron impact ionization, the same neutral species were also ionized by single photon absorption from a pulsed VUV laser (photon energy 7.9 eV), and the photoionization cross sections were evaluated from the laser intensity dependence of the measured signals. By in situ combining both ionization mechanisms, absolute values of the ratio σ _e (Ag _n )/σ _e (Ag) between the electron impact ionization cross sections of silver clusters and atoms could be determined for a fixed electron energy of 46 eV. These values can then be used to calibrate previously measured relative ionization functions. By calibrating the results using literature data measured for silver atoms, we present absolute cross sections for electron impact ionization of neutral Ag₂, Ag₃ and Ag₄ as a function of the electron energy between threshold and 125 eV.     

Synthesis and cytotoxic activity of 11-nitro and 11-amino derivatives of acronycine and 6-demethoxyacronycine

Condensation of 2-chloro-3-nitrobenzoic acid with either 5-amino-7-methoxy-2,2-dimethyl-2H-chromene or 5-amino-2,2-dimethyl-2H-chromene afforded diphenylamines 14 and 15. Trifluoroacetic anhydride mediated cyclization gave the corresponding acridones 16 and 17, which were subsequently N-methylated and reduced to 11-aminoacronycine and 11-amino-6-demethoxyacronycine. These two amino compounds, which gave stable water soluble salts, were 2- to 3-fold more potent than acronycine or 6-demethoxyacronycine in inhibiting L1210 cell proliferation.     

Electronic influences on 3J(C,H) coupling constants via -S-, -S(O)- and -SO2-: their determination, calculation and comparison of detection methods

3J(C,H) coupling constants via a sulfur atom in two series of compounds, both including a sulfide, a sulfoxide and a sulfone, were detected experimentally and calculated by quantum mechanical methods. In the first series (1-3) the coupling between a hydrogen, bonded to an sp3 carbon, and an sp2 carbon is treated; the second series (4-6) deals with the coupling between a hydrogen, bonded to an sp3 carbon, and an sp3 carbon. Different pulse sequences (broadband HMBC, SelJres, 1D HSQMBC, J-HMBC-2, selective J-resolved long-range experiment and IMPEACH-MBC) proved to be useful in determining the long-range 3J(C,H) coupling constants. However, the dynamic behaviour of two of the compounds (4 and 6) led to weighted averages of the two coupling constants expected (concerning equatorial and axial positions of the corresponding hydrogens). DFT calculations proved to be useful to calculate not only the 3J(C,H) coupling constants but also the different contributions of FC, PSO, DSO and SD terms; the calculation of the Fermi contact term (FC) was found to be sufficient for the correct estimation of 3J(C,H) coupling constants.     

Striktionseigenschaften von Regelscharen imE n

Let ={e(u)|uI} be a one-parameter family of straight lines forming a ruledC ^r-2-surface E ⁿ (n2,r1) without singular generatorse(u) (uI). As a synopsis, a generalization and an improvement of various results already known about the strictional properties of ruled surfaces E ⁿ (especially in the casen=3) the author demonstrates a uniform geometrical way of defining and uniquely obtaining thestriction point S(u) and theparameter of distribution d(u) of a generatore(u) under the minimal assumptions thate(u)E ⁿ (n2) be noncylindrical andr1. Other methods of obtainingS(u) andd(u) are discussed in comparison, and special strictional properties ofskew ruled surfaces E ⁿ are proved.

---

---

Herrn Prof. Dr. H. R. Müller zum 65. Geburtstag     

Mechanical Properties of Organic-Inorganic Hybrid Materials Determined by Indentation Techniques

The mechanical properties of hybrid materials consisting of polystyrene (PS), which was cross-linked with different proportions of the multifunctional cluster Zr₆O₄(OH)₄(methacrylate)₁₂ (Zr6) were investigated. With the help of (micro)indentation and scratch testing, the influence of the Zr6 clusters on mechanical properties, such as hardness, stiffness, creep, craze initiation, and scratch resistance was shown. There was only a slight increase in hardness and in indentation modulus with higher cluster loadings. While this observation was in agreement with the compression behaviour of the materials, the tensile properties showed a much stronger dependence on the Zr6 content. With increasing cluster loading, an increase of craze initiation stress, as determined by ball indentation experiments, was found. Performing scratch testing with constant load, a reduction of pile-up and a stronger recovery were observed for the hybrid materials compared to the neat PS. Scratch tests with a constant increase of load showed an increase of the critical load for crack opening during scratching.     

First metallamacrocyclic complexes of Pt(iv) with 3,3,3',3'-tetraalkyl-1,1'-phenylenedicarbonylbis(thioureas): synthesis by direct or electrolytic oxidative addition of I(2), Br(2) and Cl(2)

Elemental I(2) and Br(2) cleanly react with the 3:3 Pt(ii) metallamacrocycle of 3,3,3',3'-tetra(n-butyl)-1,1'-terephthaloylbis(thiourea)(cis-[Pt(II)(3)(L(p)(1)-S,O)(3)]3), in chloroform at room temperature, to yield oxidative addition products; (195)Pt NMR studies reveal that a stepwise oxidative addition readily occurs to each of the Pt(ii) centres in the metallamacrocycle to yield the mixed valence species cis-[Pt(II)(2)Pt(IV)I(2)(L(p)(1)-S,O)(3)] and cis-[Pt(II)Pt(IV)(2)I(4)(L(p)(1)-S,O)(3)], and the fully oxidised cis-[Pt(IV)(3)I(6)(L(p)(1)-S,O)(3)] in solution, depending on the mole ratio I(2):3. Similar results are obtained on treatment of solutions of 3 with elemental Br(2). Treatment of the corresponding 2:2 Pt(ii) complex of 3,3,3',3'-tetraethyl-1,1'-isophthaloylbis(thiourea)(cis-[Pt(II)(2)(L(m)(1)-S,O)(2)]4) with iodine, results in facile oxidative addition to yield cis-[Pt(IV)(2)(L(m)(1)-S,O)(2)I(4)], with a trans-Pt(iv)-iodo arrangement. Molecules in the crystal structure of 5 have their trans-Pt(iv)-iodo axes essentially aligned, with very close intermolecular iodide contacts (3.775(1)A), resulting in chains of weakly bound metallamacrocycles in the solid. An alternative electrolytic synthesis method, using a simple two-compartment glass cell containing 4 and a chosen halide salt in dichloromethane, led to the formation of cis-[Pt(IV)(2)(L(m)(1)-S,O)(2)Br(4)] 6 and cis-[Pt(IV)(2)(L(m)(1)-S,O)(2)Cl(4)] 7, completing characterization of a series of first-reported trans-Pt(iv)-X (X=I, Br, Cl) metallamacrocyclic complexes.