Magnetic properties of Fe−Mn−Al alloy system in the FCC disordered phase

In this work we report the experimental studies of Fe?Mn?Al alloys in the FCC disordered phase at room temperature by Mössbauer spectroscopy and X-ray diffraction. In this phase the alloys are antiferromagnetic with a constant mean hyperfine field ( \(\bar H\) ) near 26 kOe in the composition range from 0 to 7.5 at.% Al and 50 to 65 at.% Fe. When the Al or Fe concentration increases, the \(\bar H\) value gradually decreases to zero and the alloy becomes paramagnetic. In the same way when the Al concentration increases the lattice parameter increases linearly but when the Fe concentration increases the lattice parameter remains nearly constant for alloys with 5 at.% Al and decreases for alloys with 10 at.% Al.     

On the Mechanical Properties of Popgraphene-Based Nanotubes: a Reactive Molecular Dynamics Study

Carbon-based tubular materials have sparked a great interest in future electronics and optoelectronics device applications. In this work, we computationally studied the mechanical properties of nanotubes generated from popgraphene (PopNTs). Popgraphene is a 2D carbon allotrope composed of 5-8-5 rings. We carried out fully atomistic reactive (ReaxFF) molecular dynamics for PopNTs of different chiralities ( and ) and/or diameters and at different temperatures (from 300 up to 1200 K). Results showed that the tubes are thermally stable (at least up to 1200 K). All tubes presented stress/strain curves with a quasi-linear behavior followed by an abrupt drop of stress values. Interestingly, armchair-like PopNTs ( ) can stand a higher strain load before fracturing when contrasted to the zigzag-like ones ( ). Moreover, it was obtained that Young's modulus (Y_Mod) (750–900 GPa) and ultimate strength (σ_US) (120–150 GPa) values are similar to the ones reported for conventional armchair and zigzag carbon nanotubes. Y_Mod values obtained for PopNTs are not significantly temperature-dependent. While the σ_US values for the showed a quasi-linear dependence with the temperature, the exhibited no clear trends.     

Human Y‐chromosome SNP characterization by multiplex amplified product‐length polymorphism analysis

We designed an allele‐specific amplification protocol to optimize Y‐chromosome SNP typing, which is an unavoidable step for defining the phylogenetic status of paternal lineages. It allows the simultaneous highly specific definition of up to six mutations in a single reaction by amplification fragment length polymorphism (AFLP) without the need of specialized equipment, at a considerably lower cost than that based on single‐base primer extension (SNaPshot?) technology or PCR‐RFLP systems, requiring as little as 0.5 ng DNA and compatible with the small fragments characteristic of low‐quality DNA. By designation of two primers recognizing the derived and ancestral state for each SNP, which can be differentiated by size by the addition of a noncomplementary nucleotide tail, we could define major Y clades E, F, K, R, Q, and subhaplogroups R1, R1a, R1b, R1b1b, R1b1c, J1, J2, G1, G2, I1, Q1a3, and Q1a3a1 through amplification fragments that ranged between 60 and 158bp.     

A method for calibration and validation subset partitioning

This paper proposes a new method to divide a pool of samples into calibration and validation subsets for multivariate modelling. The proposed method is of value for analytical applications involving complex matrices, in which the composition variability of real samples cannot be easily reproduced by optimized experimental designs. A stepwise procedure is employed to select samples according to their differences in both x (instrumental responses) and y (predicted parameter) spaces. The proposed technique is illustrated in a case study involving the prediction of three quality parameters (specific mass and distillation temperatures at which 10 and 90% of the sample has evaporated) of diesel by NIR spectrometry and PLS modelling. For comparison, PLS models are also constructed by full cross-validation, as well as by using the Kennard-Stone and random sampling methods for calibration and validation subset partitioning. The obtained models are compared in terms of prediction performance by employing an independent set of samples not used for calibration or validation. The results of F-tests at 95% confidence level reveal that the proposed technique may be an advantageous alternative to the other three strategies.     

A comparative study of calibration transfer methods for determination of gasoline quality parameters in three different near infrared spectrometers

This work presents a comparative study of calibration transfer among three near infrared spectrometers for determination of naphthenes and RON (Research Octane Number) in gasoline. Seven transfer methods are compared: direct standardization (DS), piecewise direct standardization (PDS), orthogonal signal correction (OSC), reverse standardization (RS), piecewise reverse standardization (PRS), slope and bias correction (SBC) and model updating (MU). Two pre-treatment procedures, namely standard normal variate (SNV) and multiplicative scatter correction (MSC), are also investigated. The choice of an appropriate number of transfer samples for each technique, as well as the effect of window size in PDS/PRS and OSC components, are discussed. A broad set of gasoline samples representative of the Northeastern states of Brazil is employed in the investigation. The results show that the use of calibration transfer yields prediction errors comparable to those obtained with complete recalibration of the secondary instrument. Overall, the results point to RS as the best method for the analytical problem under consideration. When storage and/or physical transportation of transfer samples are impractical, MU is more appropriate. The comprehensive investigation carried out in the present work will be of value for practitioners involved in networks of fuel monitoring.     

Theoretical study of the role of solvent Stark effect in electron transitions

The possible influence of the solvent Stark effect (SSE) on the solvatochromic shift in electron transitions has been analyzed by using the ASEP/MD (averaged solvent electrostatic potential from molecular dynamics) method. With this purpose, four molecules, two polar (acrolein and formaldehyde) and two non-polar (p-difluorobenzene and trans-difluoroethene) have been studied in solvents of diverse polarity. Independently of the nature of the system we found that the contribution of SSE on the average value of the solvent shift or on the multipole moment values is negligible. In the case of centro-symmetric molecules, our results permit to discard the SSE as cause of the solvent shift found, which must be assigned to the electrostatic interaction of the solute quadrupole and higher multipoles with the solvent. As the SSE values provide also a measure of the errors introduced by the mean field approximation (MFA), these results indicate that MFA permits a very accurate determination of the solvent shift at the same time that it reduces drastically the computational cost. Finally, a new procedure suited to the ASEP/MD method has been presented that permits to estimate the inhomogeneous broadening of spectral bands, complementing the information provided by mean field theories. This procedure does not need additional quantum calculations and its computational cost is minimal.     

Quasiclassical trajectory study of the rotational distribution for the O+NO(v = 0) fundamental vibrational excitation

Quasiclassical trajectories have been run to study the fundamental one‐quantum vibrational transition formed from collisions of ground‐state nitric oxide with atomic oxygen at temperatures of 500, 750, and 1000 K. Two adiabatic potential energy surfaces of different symmetry (²A′ and ²A″ of NO₂) have been utilized. The rate constant for the title process is given along with the rotational distributions, and the results shown to corroborate previous atmospheric models that describe the nascent state by a Maxwell–Boltzmann distribution at the local temperature. © 2011 Wiley Peiodicals, Inc. Int J Chem Kinet 43: 345–352, 2011