Selective crystallization of calcium salts by poly(acrylate)-grafted chitosan

The biopolymer chitosan was chemically modified by grafting polyacrylamide or polyacrylic acid in a homogeneous aqueous phase using potassium persulfate (KPS) as redox initiator system in the presence of N,N-methylene-bis-acrylamide as a crosslinking agent. The influence of the grafted chitosan on calcium salts crystallization in vitro was studied using the sitting-drop method. By using polyacrylamide grafted chitosan as substrate, rosette-like CaSO4 crystals were observed. This was originated by the presence of sulfate coming from the initiator KPS. By comparing crystallization on pure chitosan and on grafted chitosan, a dramatic influence of the grafted polymer on the crystalline habit of both salts was observed. Substrates prepared by combining sulfate with chitosan or sulfate with polyacrylamide did not produce similar CaSO4 morphologies. Moreover, small spheres or donut-shaped CaCO3 crystals on polyacrylic acid grafted chitosan were generated. The particular morphology of CaCO3 crystals depends also on other synthetic parameters such as the molecular weight of the chitosan sample and the KPS concentration.     

Enhancing selectivity in oxidation catalysis with sol-gel nanocomposites

Valuable organic compounds such as alpha-hydroxy acids are easily synthesised with relevant selectivity enhancement using a sol-gel hydrophobized nanostructured silica matrix doped with the organocatalyst TEMPO: A materials science based synthetic route which cannot be achieved via classical homogeneous synthesis.     

Mass spectrometric analysis of androstan-17β-ol-3-one and androstadiene-17β-ol-3-one isomers

Mass spectrometric identification and characterization of steroids using electrospray ionization and tandem mass spectrometry has advantages in drug testing and doping control analysis attributable to limitations of gas chromatography followed by electron ionization mass spectrometry. Steroids with an androstadiene-17beta-ol-3-one nucleus and double bonds located either at C-1 and C-4, C-4 and C-9, or C-4 and C-6 were used to determine characteristic fragmentation pathways. Diagnostic dissociation routes are proposed using deuterium labeling, MS3 experiments, and analyses of structurally closely related compounds. Steroids such as boldenone (androst-1,4-diene-17beta-ol-3-one) produced characteristic product ions at m/z 121, 135, and 147. Compounds with double bonds at C-4 and C-9 generated abundant product ions at m/z 145 and 147. Conjugated double bonds at C-4 and C-6 gave rise to an intense and characteristic signal at m/z 133. Stereochemical differentiation between 5alpha- and 5beta-isomers of androstan-17beta-ol-3-ones was possible because of significant differences in relative abundance of product ions generated by elimination of acetone from alpha,beta-saturated 3-keto steroids.     

Über den Einfluß der Struktur stickstoffhaltiger Substanzen bei der Mikrobestimmung von Kohlenstoff und Wasserstoff mit Außenabsorption der Stickoxide

Zusammenfassung Bei der C-H-Bestimmung mit Außenabsorption der Stickoxide wurden bei einer Serie stickstoffhaltiger Substanzen zu hohe Wasserstoffwerte erhalten, während sich bei einer zweiten Serie, mit gleichen Atomgruppen, richtige Werte ergaben. Um dieses verschiedene Verhalten erklären zu können, wurden weitere Substanzen dieser Art dargestellt und analysiert. Dabei konnte beobachtet werden, daß Substanzen mit der Atomgruppe bei der Analyse im allgemeinen zu hohe Wasserstoffwerte geben, während die Anwesenheit von Phenylringen oder OH-Gruppen, in und Stellung wieder zu regelmäßigen Wasserstoffwerten führen.Die Darstellung neuer Verbindungen dieser Art wurde beschrieben. In den Verbindungen, die bei der C-H-Bestimmung zu hohe Wasserstoffwerte gaben, wurden zur Identifizierung einerseits der Stickstoff, anderseits C und H nach einer Methode bestimmt, die die Reduktion der Stickoxide vorsieht. Diese wird beschrieben.

---

Summary Too high hydrogen values were obtained in the C-H-determinations, with external absorption of the nitrogen oxides, in a series of nitrogenous substances, whereas a second series with the same atom groups gave correct results. To explain these divergent behaviors, additional substances were prepared and analyzed. It was then observed that substances with the group yielded too high hydrogen values in general, while the presence of phenyl rings or OH-groups in the and-position led again to uniform hydrogen values. The preparation of the new compounds of this kind is described. In the case of the compounds that gave too high hydrogen values in the C-H-determination, identification was made on one hand by determining the nitrogen, on the other hand by determining the carbon and hydrogen by another method that provides for the reduction of the nitrogen oxides. The latter is described.

---

---

Herrn Univ.-Prof. Dr.Hans Lieb zum 80. Geburtstag gewidmet.     

High-pressure dissociation of crystalline para-diiodobenzene: optical experiments and Car-Parrinello calculations

We have investigated the high-pressure properties of the molecular crystal para-diiodobenzene, by combining optical absorption, reflectance, and Raman experiments with Car-Parrinello simulations. The optical absorption edge exhibits a large red shift from 4 eV at ambient conditions to about 2 eV near 30 GPa. Reflectance measurements up to 80 GPa indicate a redistribution of oscillator strength toward the near-infrared. The calculations, which describe correctly the two known molecular crystal phases at ambient pressure, predict a nonmolecular metallic phase, stable at high pressure. This high-density phase is characterized by an extended three-dimensional network, in which chemically bound iodine atoms form layers connected by hydrocarbon bridges. Experimentally, Raman spectra of samples recovered after compression show vibrational modes of elemental solid iodine. This result points to a pressure-induced molecular dissociation process which leads to the formation of domains of iodine and disordered carbon.     

Evaluation of the antioxidant activity by flow injection analysis method with electrochemically generated ABTS radical cation

A Trolox equivalent antioxidant capacity (TEAC) decolourisation assay was adapted to a flow injection analysis (FIA) system and a simple and rapid method for antioxidant activity evaluation was developed. To avoid the time consuming step of 2,2'-azinobis(3-ethylbenzothiazoline-6-sulfonic acid)(ABTS) radical cation preparation by chemical oxidation of ABTS, as in the original TAEC assay, and hence, to shorten the analysis time, the ABTS radical cation was generated on-line by electrochemical oxidation of ABTS in the flow-through electrolysis cell forming a part of the FIA system. The proposed method was optimised with respect to a flow rate, injection volume and ABTS radical cation/carrier ratio. Under the optimised conditions linear calibration graphs for Trolox were obtained over the range 10-100 microM, with a limit of detection 1.6 microM. Good reproducibility (relative standard deviation 1.95%) and sample throughput (32 samples per hour) were achieved. The developed method was applied to the evaluation of the antioxidant activity of pure compounds and samples of some common beverages. In both cases a good correlation between the results obtained by the proposed method and TEAC values evaluated by the classic TAEC decolourisation assay was obtained (r(2)= 0.996 for pure compounds and r(2)= 0.957 for beverage samples).     

Characterisation of fresh and aged terpenic resins by micro-FTIR and GC-MS analyses of varnishes in XVI-XVII centuries paintings

Resinous materials, generally added to drying oils, were often employed as final protective films in paintings, both in tempera and oil techniques. Most of the resins used in fine arts come from exudates of plants. Natural resins are mainly composed by terpenoids. Among these resins, dammar, rosin, mastic, elemi gum, Venice turpentine were frequently employed in easel paintings. The aim of this work is the identification of natural resins in samples collected from works of art. In this paper we propose to use micro-FTIR spectrometry as a preliminary and non destructive technique to detect the presence of resinous materials in microsamples collected from paintings, followed by GC-MS analyses to obtain a precise identification of the resin. To reach this aim commercial resins, employed as standard, were analysed previously by micro-FTIR spectrometry and then analysed by GC-MS chromatography, searching characteristic chemical compounds used as "markers" of resins. The results obtained on standards allowed us to successfully analyse samples collected from two works of art: the "Portrait of a Young Gentleman", by Lorenzo Lotto (XVI century), and the "Madonna with the Infant Jesus and Saints": by Carlo Maratta (XVII secolo).     

Synthetic Applications of 2-(1,3-Dithian-2-yl)indoles. 7. Synthesis of Aspidospermidine

A new method of synthesizing the alkaloid aspidospermidine (1), based on building ring E on the pyridocarbazole [ABCD] ring structure, is reported. The preparation of the pyridocarbazole framework of Aspidosperma alkaloids is a new three-step synthetic application of 2-(1,3-dithian-2-yl)indoles. A tandem conjugate addition-alkylation reaction starting from indolyldithiane (4), 3-methylenelactam 6, and EtI yields the adduct 17. Treatment of lactam 17 with DIBALH leads to formation of the naphthyridoindole 18. Compound 18 isomerizes in aqueous AcOH to yield pyridocarbazole 3. Finally, closure of ring E and subsequent reduction of the dithiane ring produces aspidospermidine. Pyridocarbazoles 2 and 10 were prepared as models.     

Electrostatic lattice coefficients and binding energy of orthorhombic La2-x Sr x CuO4

Three valency models for orthorhombic La_2-x Sr _x CuO₄ were investigated for increasing Sr concentrationsx (0x0.21): 1. Cu²⁺Cu³⁺, 2. apex O^2–O^– and 3. in-plane O^2–O^–. All calculations were done by using structural parameters valid for the temperature range from 10 to 22 K. We thereby calculated the electrostatic interaction energy which, next to ionization potentials and electron affinities, comprises a major of the binding energyE _B of crystals. Second-order effects were accounted for by calculating the strength of ionic dipole moments induced by crystal electric fields at relevant lattice sites. Their largest strengths are comparable to the dipole moment of the water molecule. Three out of five dipoles in La_2-x Sr _x CuO₄ vanish during the transition from the orthorhombic to the tetragonal phase. The binding energy differences between the different models suggest that the system is in a state of model 1. However, the differences are very small, being in the order of 0.3 to 0.76 eV atx=0.13.