An optimized 3D inversion recovery prepared fast spoiled gradient recalled sequence for carotid plaque hemorrhage imaging at 3.0 T

An optimized 3D inversion recovery prepared fast spoiled gradient recalled sequence (IR FSPGR) on a 3-T scanner for carotid plaque imaging is described. It offers clear blood and fat signal suppression at the carotid artery bifurcation and highlights the regions of carotid plaque affected by hemorrhage at 3 T with high contrast and contrast-to-noise ratio compared with other sequences. It can potentially be used to replace the more traditional noncontrast T₁-weighted 2D black-blood imaging for hemorrhage detection and offers additional benefits of high-resolution 3D volumetric visualization.     

Synthesis and Biological Evaluation of Harmirins,Novel Harmine–Coumarin Hybrids as Potential Anticancer Agents

As cancer remains one of the major health burdens worldwide, novel agents, due to the development of resistance, are needed. In this work, we designed and synthesized harmirins, which are hybrid compounds comprising harmine and coumarin scaffolds, evaluated their antiproliferative activity, and conducted cell localization and cell cycle analysis experiments. Harmirins were prepared from the corresponding alkynes and azides under mild reaction conditions using Cu(I) catalyzed azide–alkyne cycloaddition, leading to the formation of the 1H-1,2,3-triazole ring. Antiproliferative activity of harmirins was evaluated in vitro against four human cancer cell lines (MCF-7, HCT116, SW620, and HepG2) and one human non-cancer cell line (HEK293T). The most pronounced activities were exerted against MCF-7 and HCT116 cell lines (IC₅₀ in the single-digit micromolar range), while the most selective harmirins were 5b and 12b, substituted at C-3 and O-7 of the β-carboline core and bearing methyl substituent at position 6 of the coumarin ring (SIs > 7.2). Further experiments demonstrated that harmirin 12b is localized exclusively in the cytoplasm. In addition, it induced a strong G1 arrest and reduced the percentage of cells in the S phase, suggesting that it might exert its antiproliferative activity through inhibition of DNA synthesis, rather than DNA damage. In conclusion, harmirin 12b is a novel harmine and coumarin hybrid with significant antiproliferative activity and warrants further evaluation as a potential anticancer agent.     

Genotoxic Evaluation of Fe3O4 Nanoparticles in Different Three Barley (Hordeum vulgare L.) Genotypes to Explore the Stress-Resistant Molecules

Sustainable agricultural practices are still essential due to soil degradation and crop losses. Recently, the relationship between plants and nanoparticles (NPs) attracted scientists’ attention, especially for applications in agricultural production as nanonutrition. Therefore, the present research was carried out to investigate the effect of Fe₃O₄ NPs at low concentrations (0, 1, 10, and 20 mg/L) on three genotypes of barley (Hordeum vulgare L.) seedlings grown in hydroponic conditions. Significant increases in seedling growth, enhanced chlorophyll quality and quantity, and two miRNA expression levels were observed. Additionally, increased genotoxicity was observed in seedlings grown with NPs. Generally, Fe₃O₄ NPs at low concentrations could be successfully used as nanonutrition for increasing barley photosynthetic efficiency with consequently enhanced yield. These results are important for a better understanding of the potential impact of Fe₃O₄ NPs at low concentrations in agricultural crops and the potential of these NPs as nanonutrition for barley growth and yield enhancement. Future studies are needed to investigate the effect of these NPs on the expression of resistance-related genes and chlorophyll synthesis-related gene expression in treated barley seedlings.     

Side‐chain functionalized liquid crystalline polymers and blends, 2. Phase behavior of comb‐shaped liquid crystalline ionomers containing ions of alkaline metals

An effective way to synthesize liquid crystalline ionomers by an exchange reaction between the acid groups of functionalized LC polymers and a metal acetate was examined. A number of LC ionomers containing ions of the alkaline metals Na and Rb (1.2–18.3 mol‐%) were obtained. The introduction of small amounts (1.2–5 mol‐%) of metal ions into a functionalized LC polymer matrix leads to significant changes in the phase state of copolymers – the nematic phase is replaced by a SmA phase; an increase of the content of alkaline metal ions causes linear growth of clearing temperatures. The influence of the nature of the metal ions on the phase behavior of LC ionomers was determined. To describe the peculiarities of the LC ionomers' phase behavior a model based on the assumption that an ion multiplet is formed was proposed. Here, the rigidity of the functionalized LC copolymer chains used as a matrix for the preparation of LC ionomers was taken into consideration.     

Effects of Injected Volume and Applied Voltage on Column Efficiency in Capillary Electrochromatography with Open Tubular Columns of 10 μm i. d.

The effect of some instrumental parameters on column efficiency in open tubular capillary electrochromatography (OTCEC) has been evaluated. First, it was investigated whether band broadening due to the sample injection process is within a tolerable range when an open tubular column (OTC) of about 10 μm i. d. is used. As a result of the small injection profile factor (K² = 1.3), injected volumes must be sufficiently small (less than 10 pL) to avoid a significant efficiency loss (>5%) when hydrodynamic injection by siphoning is employed. Secondly, the kinetic performance of OTCs in a CEC system was estimated from the variation of the reduced plate height (h) with the reduced linear velocity (ν) which was controlled by the voltage applied. Reasonable agreement was obtained between the theoretical h versus ν curve and the experimental values for a group of polycyclic aromatic hydrocarbons used as test compounds. Values of 0.25 for minimum h at an optimum ν of 16 are estimated, which permit separations with around 400,000 plates per meter to be obtained in less than 5 min. Finally, the possibility of estimating the diffusion coefficients of the solutes in the mobile phase from the plot of the height of a theoretical plate versus electroosmotic flow velocity is shown.     

Bioprospecting of Microalgae Isolated from the Adriatic Sea: Characterization of Biomass,Pigment, Lipid and Fatty Acid Composition,and Antioxidant and Antimicrobial Activity

Marine microalgae and cyanobacteria are sources of diverse bioactive compounds with potential biotechnological applications in food, feed, nutraceutical, pharmaceutical, cosmetic and biofuel industries. In this study, five microalgae, Nitzschia sp. S5, Nanofrustulum shiloi D1, Picochlorum sp. D3, Tetraselmis sp. Z3 and Tetraselmis sp. C6, and the cyanobacterium Euhalothece sp. C1 were isolated from the Adriatic Sea and characterized regarding their growth kinetics, biomass composition and specific products content (fatty acids, pigments, antioxidants, neutral and polar lipids). The strain Picochlorum sp. D3, showing the highest specific growth rate (0.009 h⁻¹), had biomass productivity of 33.98 ± 0.02 mg L⁻¹ day⁻¹. Proteins were the most abundant macromolecule in the biomass (32.83–57.94%, g g⁻¹). Nanofrustulum shiloi D1 contained significant amounts of neutral lipids (68.36%), while the biomass of Picochlorum sp. D3, Tetraselmis sp. Z3, Tetraselmis sp. C6 and Euhalothece sp. C1 was rich in glycolipids and phospholipids (75%). The lipids of all studied microalgae predominantly contained unsaturated fatty acids. Carotenoids were the most abundant pigments with the highest content of lutein and neoxanthin in representatives of Chlorophyta and fucoxanthin in strains belonging to the Bacillariophyta. All microalgal extracts showed antioxidant activity and antimicrobial activity against Gram-negative E. coli and S. typhimurium and Gram-positive S. aureus.     

Developing organoboranes as phase transfer catalysts for nucleophilic fluorination using CsF

Despite the general high fluorophilicity of boron, organoboranes such as BEt₃ and 3,5-(CF₃)₂C₆H₃–BPin are shown herein for the first time, to our knowledge, to be effective (solid to solution) phase-transfer catalysts for the fluorination of certain organohalides with CsF. Significant (up to 30% e.e.) chiral induction during nucleophilic fluorination to form β-fluoroamines using oxazaborolidine (pre)catalysts and CsF also can be achieved. Screening different boranes revealed a correlation between calculated fluoride affinity of the borane and nucleophilic fluorination reactivity, with sufficient fluoride affinity required for boranes to react with CsF and form Cs[fluoroborate] salts, but too high a fluoride affinity leading to fluoroborates that are poor at transferring fluoride to an electrophile. Fluoride affinity is only one component controlling reactivity in this context; effective fluorination also is dependent on the ligation of Cs⁺ which effects both the phase transfer of CsF and the magnitude of the [Cs⋯F-BR₃] interaction and thus the B–F bond strength. Effective ligation of Cs⁺ (e.g. by [2.2.2]-cryptand) facilitates phase transfer of CsF by the borane but also weakens the Cs⋯F–B interaction which in turn strengthens the B–F bond – thus disfavouring fluoride transfer to an electrophile. Combined, these findings indicate that optimal borane mediated fluorination occurs using robust (to the fluorination conditions) boranes with fluoride affinity of ca. 105 kJ mol⁻¹ (relative to Me₃Si⁺) under conditions where a signficant Cs⋯F–B interaction persists.

Simple boranes with the optimal fluoride ion affinity are effective as catalysts for phase transfer nucleophilic fluorination with CsF.     

On the linearization of systems of conservation laws for fluids at a material contact discontinuity

In order to investigate the linearized stability or instability of compressible flows, as it occurs for instance in Rayleigh–Taylor or Kelvin–Helmholtz instabilities, we consider the linearization at a material discontinuity of a flow modeled by a multidimensional nonlinear hyperbolic system of conservation laws. Restricting ourselves to the plane-symmetric case, the basic solution is thus a one-dimensional contact discontinuity and the normal modes of pertubations are solutions of the resulting linearized hyperbolic system with discontinuous nonconstant coefficients and source terms. While in Eulerian coordinates, the linearized Cauchy problem has no solution in the class of functions, we prove that for a large class of systems of conservation laws written in Lagrangian coordinates and including the Euler and the ideal M.H.D. systems, there exists a unique function solution of the problem that we construct by the method of characteristics.     

Laser doppler anemometry in hydrodynamic testing

Classical methods and the laser-Doppler-anemometry (LDA) application for the test section calibration of a water-cavitation tunnel is presented. The results show that the LDA is the best method for calibration and the classical methods satisfy the needs of standard tests. The advantages of the LDA are illustrated by determination of the pressure coefficient C _p for a hydrofoil of a high-speed axial pump under the stationary and nonstationary conditions, as well. The velocity vector distribution is measured around the central hydrofoil of a straight grid for angles of attack δ = 0° and 25° and undisturbed velocity v _∞ = 5.32 m/s. The results of the LDA measurements are used as a basis for the definition of the boundary conditions for numerical flow simulation and C _p calculation by the Fluent program. A flow visualization is made by aniline dyes and air bubbles.