Multiclass detection and quantitation of antibiotics and veterinary drugs in shrimps by fast liquid chromatography time-of-flight mass spectrometry

A fast liquid chromatography time-of-flight mass spectrometry (LC-TOFMS) method has been developed for simultaneous quantitative multiclass determination of residues of selected antibiotics and other veterinary drugs (benzalkonium chloride, ethoxyquin, leucomalachite green (LMG), malachite green (MG), mebendazole, sulfadiazine, sulfadimethoxine, sulfamethazine, sulfamethizole, sulfanilamide, sulfapyridine, sulfathiazole and trimethoprim) in shrimps. Different sample treatment methodologies were tested for the extraction of the targeted species based on either liquid partitioning with different solvents, solid-phase extraction or and matrix solid-phase dispersion. The final selected extraction method consisted of solid-liquid extraction protocol using acetonitrile as solvent followed by a clean-up step with primary secondary amine (QuEChERS). Recovery rates for the extraction of the selected multiclass chemicals were in the range 58-133%. Subsequent identification, confirmation and quantitation were carried out by LC-TOFMS analysis using a reverse-phase C₁₈ column with 1.8 μm particle size. The confirmation of the target species was based on accurate mass measurements of the protonated molecules ([M+H]⁺) and their fragment ions, obtaining routine accuracy errors lower than 2 ppm in most cases. The optimized LC-TOFMS method displayed excellent sensitivity for the studied analytes, with limits of detection (LODs) in the range 0.06-7 μg kg⁻¹. Finally, the proposed method was successfully applied to the analysis of 12 shrimp samples collected from different supermarkets, showing the potential applicability of the method for ultratrace detection of these chemicals in such complex matrix.     

Catalyst-Free Arylation of Tertiary Phosphines with Diaryliodonium Salts Enabled by Visible Light

The visible-light-induced arylation of tertiary phosphines with aryl(mesityl)iodonium triflates to produce the quaternary phosphonium salts occurs under mild, metal, and catalyst-free conditions. Photo-excited EDA complexes between diaryliodonium salts and phosphines supposedly enable this transformation, which is difficult to achieve through the traditional ground-state reactions. Demonstrating high functional group tolerance, broad scope, and complete selectivity of the aryl group transfer, the method is particularly compatible with sterically congested phosphines, which are challenging under metal-based catalytic methods.     

Charging OBO‐Fused Double [5]Helicene with Electrons

Chemical reduction of OBO‐fused double[5]helicene with Group 1 metals (Na and K) has been investigated for the first time. Two doubly‐reduced products have been isolated and structurally characterized by single‐crystal X‐ray diffraction, revealing a solvent‐separated ion triplet (SSIT) with Na⁺ ions and a contact‐ion pair (CIP) with K⁺ ion. As the key structural outcome, the X‐ray crystallographic analysis discloses the consequences of adding two electrons to the double helicene core in the SSIT without metal binding and reveals the preferential binding site in the CIP with K⁺ counterions. In both products, an increase in the twisting of the double helicene core upon charging was observed. The negative charge localization at the central core has been identified by theoretical calculations, which are in full agreement with X‐ray crystallographic and NMR spectroscopic results. Notably, it was confirmed that the two‐electron reduction of OBO‐fused double[5]helicene is reversible.     

The development of an integrated platform to identify breast cancer glycoproteome changes in human serum

Protein glycosylation represents one of the major post-translational modifications and can have significant effects on protein function. Moreover, changes in the carbohydrate structure are increasingly being recognized as an important modification associated with cancer etiology. In this report, we describe the development of a proteomics approach to identify breast cancer related changes in either concentration and/or the carbohydrate structures of glycoprotein(s) present in blood samples. Diseased and healthy serum samples were processed by an optimized sample preparation protocol using multiple lectin affinity chromatography (M-LAC) that partitions serum proteins based on glycan characteristics. Subsequently, three separate procedures, 1D SDS-PAGE, isoelectric focusing and an antibody microarray, were applied to identify potential candidate markers for future study. The combination of these three platforms is illustrated in this report with the analysis of control and cancer glycoproteomic fractions. Firstly, a molecular weight based separation of glycoproteins by 1D SDS-PAGE was performed, followed by protein, glycoprotein staining, lectin blotting and LC–MS analysis. To refine or confirm the list of interesting glycoproteins, isoelectric focusing (targeting sialic acid changes) and an antibody microarray (used to detect neutral glycan shifts) were selected as the orthogonal methods. As a result, several glycoproteins including alpha-1B-glycoprotein, complement C3, alpha-1-antitrypsin and transferrin were identified as potential candidates for further study.     

Enantiomeric separation of chiral polycyclic musks by capillary electrophoresis: Application to the analysis of cosmetic samples

The enantiomeric separation of four chiral polycyclic musks (Galaxolide, Tonalide, Traseolide and Phantolide) using CE was achieved for the first time in this work. Two chiral methodologies were developed by CD-MEKC using SDS as surfactant in a CHES buffer (pH 9.0). One methodology enabled the fast enantiomeric separation of individual polycyclic musks with analysis times lower than 10 min for Tonalide, 13 min for Traseolide and Phantolide, and 17 min for Galaxolide. Enantiomeric resolutions obtained were higher than 1.5 using different separation media for each compound. A second methodology was also developed enabling the simultaneous enantioseparation of the four musks. In this case, the use of a dual CD system containing two neutral CDs was necessary to achieve the separation of all enantiomers from three out of four musks in 45 min. Although a coelution between Galaxolide and Phantolide was observed, the use of different UV absorption wavelengths allowed the simultaneous analysis of both musks. In addition, a sweeping strategy was performed in order to increase the sensitivity of the method. Appropriate analytical characteristics (linearity, LOD and LOQ, precision and absence of matrix interferences) were obtained for conventional and sweeping methodologies. Finally, the usefulness of the method was demonstrated in the determination of the enantiomers of the polycyclic musks in personal care products as perfumes.     

A chromatochemometric approach for evaluating and selecting the perfume maceration time

A chemometric treatment of the data obtained by gas chromatography (GC) with flame ionization detector (FID) has been proposed to study the maceration time involved in perfumes manufacture with the final purpose of reducing this time but preserving the organoleptic characteristics of the perfume that is being elaborated. In this sense, GC–FID chromatograms were used as a fingerprint of perfume samples subjected to different maceration times, and data were treated by linear discriminant analysis (LDA), by comparing to a set of samples known to be macerated or not, which were used as calibration objects. The GC–FID methodology combined with the treatment of data by LDA has been applied successfully to seven different perfumes. The constructed LDA models exhibited excellent Wilks’ lambdas (0.013–0.118, depending on the perfume), and up to a reduction of 57% has been achieved with respect to the maceration time initially established.     

Electrocatalytic reduction of ROOH by iron porphyrins

Electrocatalytic reduction of a series of chemical oxidants of different power (tert-butyl hydroperoxide, potassium peroxomonosulfate, peracetic acid, and m-chloroperbenzoic acid) at iron-porphyrin-modified graphite electrodes is studied in buffered aqueous solutions by rotating disk and ring-disk voltammetry. Both ferric and ferrous porphyrins are catalytically active. Turnover of ferric catalysts is slower than that of the ferrous analogues and involves competing catalytic reduction and disproportionation. The kinetic data are consistent with reactant binding being the rate-determining step in catalysis by Fe(III). In catalysis by Fe(II), the turnover is controlled by the first electron transfer. The covalently linked proximal imidazole ligand is found to be crucial for achieving the Fe(III) catalysis.     

Combined use of liquid chromatography-nuclear magnetic resonance spectroscopy and liquid chromatography-mass spectrometry for the characterization of an acarbose degradation product

Directly coupled LC-MS and LC-NMR were applied to identify and structurally characterize an acarbose degradation product A in acidic media. A comparative analysis of the stop-flow LC-NMR (1H and TOCSY) and LC-MS data provided evidence that A is structurally related to acarbose, differing from the parent compound in a number of subunits present in the molecule. Spectral analysis revealed that A was the alpha-glucosidase inhibitor amylostatin XG. Complementary information obtained from the two methods led to the structural elucidation of A which was later corroborated by high-resolution NMR spectroscopy of the isolated molecule.     

A new thermoelectric material: CsBi4Te6

The highly anisotropic material CsBi(4)Te(6) was prepared by the reaction of Cs/Bi(2)Te(3) around 600 degrees C. The compound crystallizes in the monoclinic space group C2/m with a = 51.9205(8) A, b = 4.4025(1) A, c = 14.5118(3) A, beta = 101.480(1) degrees, V = 3250.75(11) A(3), and Z = 8. The final R values are R(1) = 0.0585 and wR(2) = 0.1127 for all data. The compound has a 2-D structure composed of NaCl-type [Bi(4)Te(6)] anionic layers and Cs(+) ions residing between the layers. The [Bi(4)Te(6)] layers are interconnected by Bi-Bi bonds at a distance of 3.2383(10) A. This material is a narrow gap semiconductor. Optimization studies on the thermoelectric properties with a variety of doping agents show that the electrical properties of CsBi(4)Te(6) can be tuned to yield an optimized thermoelectric material which is promising for low-temperature applications. SbI(3) doping resulted in p-type behavior and a maximum power factor of 51.5 microW/cm.K(2) at 184 K and the corresponding ZT of 0.82 at 225 K. The highest power factor of 59.8 microW/cm.K(2) at 151 K was obtained from 0.06% Sb-doped material. We report here the synthesis, physicochemical properties, doping characteristics, charge-transport properties, and thermal conductivity. Also presented are studies on n-type CsBi(4)Te(6) and comparisons to those of p-type.