Theoretical prediction and assignment of vicinal 1H-1H coupling constants of diastereomeric 3-alkoxy-6,7-epoxy-2-oxabicyclo[3.3.0]octanes

Spin-spin coupling constants between nuclei in NMR spectroscopy reflect their spatial arrangement. A number of calculation methods, applying different levels of theory, have been developed to support the stereochemical assignment of novel compounds. Nevertheless, revisions of the assignment of structures in the literature are not rare. In the present work, the reliability of the calculation methods amenable for a theoretical prediction of spin-spin coupling constants of vicinal protons to support correct stereochemical assignment of substitution at five-membered rings of 3-alkoxy-6,7-epoxy-2-oxabicyclo[3.3.0]octanes was studied. Experimental (3)J(H,H) coupling constants were compared with the coupling constants calculated for all possible diastereomers. The fully quantum chemical approach provided theoretical (3)J(H,H) coupling constants with an absolute deviation of no more than 1.1 Hz for 91% of the experimentally studied coupled spins, whereas the methods without quantum chemical geometry optimization resulted in completely unreliable predictions. Consequently, for a reliable stereochemical assignment of small and medium size molecules, the protocol for calculating the coupling constants based on the results of the quantum chemical geometry optimization is recommended.     

Application of a modified Pechini method for the synthesis of Ln<Subscript>2</Subscript>MGe<Subscript>4</Subscript>O<Subscript>12</Subscript> (Ln = Y,Eu; M = Ca,Zn, Mn) optical hosts

A modified Pechini method followed by conventional and microwave heating was used to synthesise the new promising Ln₂MGe₄O₁₂ (Ln = Y, Eu; M = Ca, Zn, Mn) optical hosts. Comparison between solid-state and Pechini synthesis methods showed that the latter reduces the temperature required for cyclo-tetragermanate formation. The highest yield of cyclo-tetragermanates for both methods is observed at 1,000–1,100 °C, with significantly shorter time of annealing in the case of the Pechini synthesis. Compositional, structural and morphological characterisations of the samples obtained by both routes were carried out using X-Ray powder diffraction, thermogravimetry, electron spin resonance spectroscopy, energy-dispersive X-Ray spectroscopy and scanning electron microscopy.     

Non-destructive spectroscopic characterization of parchment documents

Membranaceous substrates - widely found in library heritage - are truly challenging, due to the variety of manufacturing traditions, the intrinsic variability of the animal's skin and the different degradation patterns affecting documents along ageing. Moreover, when dealing with unique and delicate objects as cultural heritage specimens, sampling is never recommended and often explicitly forbidden. Aim of the research presented in this work is to achieve correct protocols for unambiguous characterization of the document's materials chemical structure and of the possible surface treatments.Experimental results allow us to evidence that the chosen non-destructive techniques (Raman, ATR-FTIR and SEM/EDS) provide a good differentiation between parchment manufacturing procedures, western with lime and eastern with enzymatic treatment. Incrustations of salts on the surface as well as superficial treatment with tannin can be clearly detected. Origin of tannin - from the surface or in ink - can also be distinguished.Choice of the better technique is sample-dependent, since preparation methods, degradation, presence of incrustations, amount of tannin, dehairing method can differently affect the spectral features. For instance, Raman appears to be the most effective molecular technique on western parchment, whereas ATR-FTIR allows distinguishing the enzymatic dehairing procedure from the chemical one.     

Nanodimer cyclodextrin ligands with high affinity to steroids

Molecular-imprinting by cross-linking of ligands of ??-cyclodextrin (CD) complex with steroids has been developed for the synthesis of tailor-made CD dimer. Steroids of androstane (9??-hydroxy-androst-4-en-3,17-dione, androst-4-en-3,17-dione, androsta-1,4-dien-3,17-dione (ADD)) and pregnane (hydrocortisone, 6-methyl-hydrocortisone, 20-hydroxymethylpregna-1,4-diene-3-one (HMPD)) series were used as template molecules. For imprinting procedure, crystalline ??-CD complexes of exact stoichiometry (??-CD:steroid template = 2:1) were synthesized following by toluene 2,4-diisocyanate (TDI) cross-linking. The attempts to produce CD dimer for steroid without hydrophobic side chain failed, while tailor-made CD dimer has been obtained using HMPD as a template. The dimer was characterized by ¹H NMR and mass-spectrometry. The complex stability constant (K_S) towards HMPD template exceeded 10⁷ M^?1. The K_S of CD dimer with ADD exceeded the corresponded value of TDI-modified CD monomer by more than an order of magnitude. The dimer was applied for quantitative extraction of ADD from aqueous solution using dialysis membranes impermeable for CD. The value of K_S for ADD estimated from balanced concentrations of dialysis data corresponded to that calculated by nonlinear spectrometric method.     

Influence of cholesterol on the phase transition of lipid bilayers: a temperature-controlled force spectroscopy study

Cholesterol (Chol) plays the essential function of regulating the physical properties of the cell membrane by controlling the lipid organization and phase behavior and, thus, managing the membrane fluidity and its mechanical strength. Here, we explore the model system DPPC:Chol by means of temperature-controlled atomic force microscopy (AFM) imaging and AFM-based force spectroscopy (AFM-FS) to assess the influence of Chol on the membrane ordering and stability. We analyze the system in a representative range of compositions up to 50 mol % Chol studying the phase evolution upon temperature increase (from room temperature to temperatures high above the T(m) of the DPPC bilayer) and the corresponding (nano)mechanical stability. By this means, we correlate the mechanical behavior and composition with the lateral order of each phase present in the bilayers. We prove that low Chol contents lead to a phase-segregated system, whereas high contents of Chol can give a homogeneous bilayer. In both cases, Chol enhances the mechanical stability of the membrane, and an extraordinarily stable system is observed for equimolar fractions (50 mol % Chol). In addition, even when no thermal transition is detected by the traditional bulk analysis techniques for liposomes with high Chol content (40 and 50 mol %), we demonstrate that temperature-controlled AFM-FS is capable of identifying a thermal transition for the supported lipid bilayers. Finally, our results validate the AFM-FS technique as an ideal platform to differentiate phase coexistence and transitions in lipid bilayers and bridge the gap between the results obtained by traditional methods for bulk analysis, the theoretical predictions, and the behavior of these systems at the nanoscale.     

Excited-state dynamics of organic dyes at liquid/liquid interfaces

Liquid/liquid interfaces play a crucial role in numerous areas of science. However, direct spectroscopic access to this thin (～1 nm) region is not possible with conventional optical methods. After a brief review of the most used techniques to perform interfacial optical spectroscopy, we will focus on time-resolved surface second harmonic generation, which allows the measurement of the excited-state dynamics of probe molecules at interfaces. By comparing these dynamics with those measured in bulk solutions, precious information on the properties of the interfacial region can be obtained. To illustrate this, several studies performed in our group will be presented.     

Structures and Dynamic Solution Behavior of Cationic,Two‐Coordinate Gold(I)–π‐Allene Complexes

A family of seven cationic gold complexes that contain both an alkyl substituted π‐allene ligand and an electron‐rich, sterically hindered supporting ligand was isolated in >90 % yield and characterized by spectroscopy and, in three cases, by X‐ray crystallography. Solution‐phase and solid‐state analysis of these complexes established preferential binding of gold to the less substituted C?C bond of the allene and to the allene π face trans to the substituent on the uncomplexed allenyl C?C bond. Kinetic analysis of intermolecular allene exchange established two‐term rate laws of the form rate=k₁[complex]+k₂[complex][allene] consistent with allene‐independent and allene‐dependent exchange pathways with energy barriers of ΔG^≠₁=17.4–18.8 and ΔG^≠₂=15.2–17.6 kcal mol^?1, respectively. Variable temperature (VT) NMR analysis revealed fluxional behavior consistent with facile (ΔG^≠=8.9–11.4 kcal mol^?1) intramolecular exchange of the allene π faces through η¹‐allene transition states and/or intermediates that retain a staggered arrangement of the allene substituents. VT NMR/spin saturation transfer analysis of [{P(tBu)₂o‐binaphthyl}Au(η²‐4,5‐nonadiene) ]⁺SbF₆^? ( 5 ), which contains elements of chirality in both the phosphine and allene ligands, revealed no epimerization of the allene ligand below the threshold for intermolecular allene exchange (ΔG^≠_298K=17.4 kcal mol^?1), which ruled out the participation of a η¹‐allylic cation species in the low‐energy π‐face exchange process for this complex.     

Jahn–Teller Effect in Circulenes: X‐ray Diffraction Study of Coronene and Corannulene Radical Anions

Single‐crystal X‐ray diffraction studies of two polyaromatic radical anions crystallized as sodium salts, namely [Na(DME)₃]⁺[C₂₀H₁₀^?] ( 1 ) and [Na(DME)₃]⁺[C₂₄H₁₂^?] ( 2 ) are reported. This allowed the first structural evaluation of Jahn–Teller (JT) effects for monoreduced circulenes and a comparison between bowl‐shaped corannulene and planar coronene. The C_s and D_2h symmetrical distortions are found to fit the experimental data for C₂₀H₁₀^.? and C₂₄H₁₂^.?, respectively. The continuous symmetry measure (CSM) analysis was carried out to provide a quantitative measure of the JT distortions in 1 and 2 . In addition, the X‐ray crystallographic results were fully supported by DFT calculations.     

From Graftable Biphotonic Chromophores to Water‐Soluble Organic Nanodots for Biophotonics: The Importance of Environmental Effects

The photophysical and two‐photon absorption (TPA) properties of biphotonic chromophores with one or two phenol pendant units were studied and compared with that of a model biphotonic quadrupolar chromophore. A water‐soluble dendritic structure was then synthesized by using the pendant moieties as starting points for the construction of dendritic branches. We show that the polarity of the environment significantly modulates both the fluorescence and the TPA responses of the different chromophoric derivatives. This extends to more subtle effects that involve phenol pendant moieties that were found to act as discrete solvating units and to modify both the photophysics and the TPA response of the chromophore. This demonstrates the high sensitivity of the TPA response of quadrupolar derivatives to minute alterations in the environment. Moreover, the dendritic branches were found to behave as a peculiar cybotactic environment that was able to tune the fluorescence and TPA response of the inner chromophore by creating a polar environment. This reveals a new direction for exploiting such effects by playing on the dendritic architecture (e.g., the nature and shape of the building blocks, the geometry and position of the chromophore) to modulate the TPA responses.     

Studies of network organization and dynamics of e-beam crosslinked PVPs: From macro to nano

In this work the influence of poly(N-vinyl pyrrolidone) (PVP) concentration in water on the organization and dynamics of the corresponding macro-/nanogel networks has been systematically investigated. Irradiation has been performed at the same irradiation dose (within the sterilization dose range) and dose rate. In the selected irradiation conditions, the transition between macroscopic gelation and micro-/nanogels formation is observed just below the critical overlap concentration (～1 wt%), whereas the net prevalence of intra-molecular over inter-molecular crosslinking occurs at a lower polymer concentration (below 0.25 wt%). Dynamic–mechanical spectroscopy has been applied as a classical methodology to estimate the network mesh size for macrogels in their swollen state, while ¹³C NMR spin–lattice relaxation spectroscopy has been applied on both the macrogel and nanogel freeze dried residues to withdraw interesting information of the network spatial organization in the passage of scale from macro to nano.