Radon and gamma-radiation measurements in schools on the territory of the abandoned uranium mine “Žirovski vrhl”

On the territory of the abandoned uranium mine irovski vrh, Slovenia, indoor radon and gamma dose rate measurements were carried out in nineteen schools from February 10 to May 10, 1995, using scintillation cells and etched track detectors for radon and thermoluminescence dosimeters for gamma-ray detection. In five schools indoor radon levels exceeded 400 Bq·m^-3, which is the proposed Slovene action level. The maximum average radon value of 1600 Bq·m^-3 and the maximum gamma-dose rate of 172 Sv·month^-1 were found in the same school. According to the ICRP 65 methodology, annual effective doses from radon decay products ranged from 0.05 to 6.10 mSv for pupils and from 0.04 to 4.90 mSv for teachers. Gamma dose rates ranged from 0.05 to 0.19 mSv·y^-1 for pupils and from 0.07 to 0.27 mSv·y^-1 for teachers.     

Structural characterization of chondroitin/dermatan sulfate oligosaccharides from bovine aorta by capillary electrophoresis and electrospray ionization quadrupole time-of-flight tandem mass spectrometry

An analytical approach based on high-performance capillary electrophoresis (CE) in conjunction with electrospray ionization quadrupole time-of-flight tandem mass spectrometry (ESI-QTOF-MS/MS) has been developed for providing the basis to obtain new insights into the domain structure of the glycosaminoglycan (GAG) moiety of proteoglycans. The feasibility and performance of the off-line CE/ESI-QTOF-MS approach in GAG oligosaccharide analysis were assessed by screening a chondroitin/dermatan sulfate (DS) oligosaccharide mixture obtained from bovine aorta by enzymatic depolymerization by chondroitin B lyase. The CS/DS mixture was analyzed by CE using 50 mM ammonium acetate, pH 12.0, dissolved in aqueous methanol (2:3; v/v), as a CE carrier. Structural identification of the GAG components was achieved using off-line CE/nanoESI-QTOF-MS and-MS/MS experiments. ESI-QTOF instrumental parameters were found to play an important role in the MS screening of the CE-separated GAG species. By optimizing the ESI conditions, oligosaccharides differing in chain length and degree of sulfation could be detected. The building block composition, the size of the carbohydrate chain, as well as structural features of the repeating HexA-GalNAc, HexA-GalNAc(S) units, have been determined using MS/MS by applying collision-induced dissociation at low energies. Cleavage of GAG chains by chondroitin B lyase occurs with formation of structural markers useful for identification of IdoA-containing domains.     

Kinetic determination of codeine in pharmaceutical preparations

A kinetic method for the determination of codeine, based on its inhibitor action on the catalytic decomposition of hydrogen peroxide by cobalt(II), is presented. It has been found that the effect of codeine is most pronounced in the presence of 5% v/v ethylene glycol. The reaction is followed photometrically. Codeine can be determined in concentrations ranging from 0.80×10^–5 M to 2.4×10^–5 M. The method has been applied to the determination of codeine in pharmaceutical preparations.     

Electrochemical oxidation of formic acid at noble metals: Catalytic effects of foreign metal monolayers

The catalytic effects of a submonolayer of lead on noble metals have been shown and discussed in terms of a previously published model. A theoretical analysis of these effects is presented. It was demonstrated that foreign metal monolayers allow a determination of the true catalytic activity of electrodes in the case of self-poisoning reactions. A volcano-shaped curve for oxidation of formic acid on noble metal electrodes was obtained.     

Determination of diamine oxidase by a kinetic method with 2,2''-azino-di(3-ethylbenzthiazoline-6-sulfonate)

Hydrogen peroxide, the product of diamine oxidase-catalyzed putrescine or cadaverine oxidation, formed in proportion to the enzyme activity, is measured spectrophotometrically by using the above sulfonate (ABTS) and peroxidase. Only one reagent solution containing 3 mmol of putrescine or 10 mmol of cadaverine, 4 mmol of ABTS and 3000 U of peroxidase per litre of 0.2 mol l^-1 Tris—0.1 mol l^-1 HCl buffer pH 7.5 is needed. Absorbance changes are measured at 410 nm over the first 3 min of the reaction. This initial oxidation rate of the chromogen enables diamine oxidase activity up to 230 U l^-1 to be determined.     

Argentometric determination of iodide and cyanide using a depolarisation end-point

It has been shown that the depotarisation end-point technique, based on the phenomenon of a sudden out-of-balance current, produced by the establishment of a new redox potential at the indicator electrode in a pre-balanced circuit, can also be applied to precipitation titrations. The use of a platinum indicator electrode instead of one made of silver, and determination in very dilute solution, yield better results than those obtained using the classical potentiometric method.     

Thermal analysis and kinetics of the copper-lead matte roasting process

In this paper, the results of copper-lead matte investigations are presented. Investigated copper-lead matte is intermediate product of the lead production in TREPCA-Zvečan. In the first part of the paper characterization of starting material is presented, consisting of: chemical composition analysis (XRQ), scanning electron microscopy (SEM) and diffractometry (XRD). Thermal properties of investigated matte were determined using differential thermal analysis (DTA) at characteristic temperatures. Using results of induced analysis, mechanism of matte oxidation process was determined. In the second part of the paper kinetic parameters describing oxidative roasting of copper-lead matte are presented. For activation energy calculations, non-isothermal methods defined by Kissinger and Ozawa were used [1, 2]. Kinetic equation describing oxidation process was determined using Sharps method of reduced half time of reaction [3].     

Chromatographic separation and determination of Zr in bauxites and aluminum alloys

Summary A simple thin-layer chromatographic method for the complete separation of Zr from aluminum is described. The optimum solvent composition is evaluated by means of the simplex method of optimization. Quantitative determination and regression analysis is carried out.     

Reduction of a simple ion at permeable film-coated stationary electrodes

Recently proposed chemically prepared electrodes are coated with a thin, permeable, insulating, inert film which does not react with the depolarizer, does not allow depolarization on its surface and does not change the standard constant of the depolarization rate. It only changes the diffusion coefficient of a certain ion near the surface of the electrode. In this article, the theory of a reversible reduction of a simple ion at a film-coated stationary planar electrode is developed. If the film thickness is comparable with a diffusion layer thickness, considerable changes on the i-t curves can occur, but the position of the half-wave potential will remain constant.