Effect of Functionalized Benzene Derivatives as Potential Hole Scavengers for BiVO4 and rGO-BiVO4 Photoelectrocatalytic Hydrogen Evolution

Sustainable hydrogen production is one of the main challenges today in the transition to a green and sustainable economy. Photocatalytic hydrogen production is one of the most promising technologies, amongst which BiVO₄-based processes are highly attractive due to their suitable band gap for solar-driven processes. However, the performance of BiVO₄ alone in this role is often unsatisfactory. Herein we report the improvement of BiVO₄ performance with reduced graphene oxide (rGO) as a co-catalyst for the photoelectrochemical water splitting (PEC-WS) in the presence of simple functionalized benzene derivatives (SFBDs), i.e., phenol (PH), benzoic acid (BA), salicylic acid (SA), and 5-aminosalicylic acid (5-ASA) as potential photogenerated hole scavengers from contaminated wastewaters. Linear sweep voltammetry and chronoamperometry, along with electrochemical impedance spectroscopy were utilized to elucidate PEC-WS performance under illumination. rGO has remarkably improved the performance of BiVO₄ in this role by decreasing photogenerated charge recombination. In addition, 5-ASA greatly improved current densities. After 120 min under LED illumination, 0.53 μmol of H₂ was produced. The type and concentration of SFBDs can have significant and at times opposite effects on the PEC-WS performance of both BiVO₄ and rGO-BiVO₄.     

A novel biamperometric biosensor for urinary oxalate determination using flow-injection analysis

A biosensor for determination of oxalate concentration in urine has been developed by immobilisation of oxalate oxidase and peroxidase on the surface of an interdigitated gold electrode. Enzyme immobilisation was performed using BSA and glutaraldehyde. Biamperometric measurements were made in flow conditions both in aqueous oxalate solutions (tested concentration range between 50 μM and 10 mM) and in real urine samples (tested measuring range between 5 and 100 μM). Optimal working conditions were examined for flow-injection analysis, and good correlation was achieved between added oxalate quantity and the one measured by biosensor in urine matrix (R² = 0.9983). The influence of some interferences (ascorbic acid, uric acid, paracetamol, acetylsalicylic acid) was also studied using biamperometric measurement mode.     

Magnesocene‐Based Electrolytes: A New Class of Electrolytes for Magnesium Batteries

Unlike ferrocene, bis(η⁵‐cyclopentadienyl)magnesium (magnesocene, MgCp₂) is slightly dissociated in solvents, such as ethers, resulting in electrolyte solutions with low conductivity. MgCp₂/tetrahydrofuran solutions make possible reversible magnesium plating and stripping with low over‐potentials for many cycles. The Mg deposits appear with a cauliflower‐like morphology. IR and NMR spectroscopy confirm that the electrolyte is stable and not decomposed during prolonged cycling. The anodic stability limit is in the range of 1.5 V (at platinum) and 1.8 V versus Mg/Mg²⁺ (at stainless steel), which may be sufficient for low‐voltage cathode materials. MgCp₂ is a first example of a completely new class of halide‐free electrolytes, which may open up a new research direction for future magnesium metal and magnesium‐ion batteries.     

Phenylselenoetherification of Some Δ5-Alkenols in the Presence of Pyridine, Ag2O, and AgOAc as Additives

Summary. An improved procedure for intramolecular cyclization of some ⁵-alkenols using PhSeX (X=Cl, Br) was developed. We found that cyclization can be facilitated in the presence of pyridine, Ag₂O, and AgOAc as additives. Thus, a catalytic amount of additive influenced higher yields and equimolar amounts achieved almost quantitative yields under extremely mild experimental conditions. The effect of the halide ion of the selenylating reagent was not significant.Received October 21, 2002; accepted (revised) November 13, 2002 Published online August 28, 2003     

Beneficial Effects of Laurel (Laurus nobilis L.) and Myrtle (Myrtus communis L.) Extract on Rat Health

Polyphenols of Laurel and Myrtle exhibit structural diversity, which affects bioavailability, metabolism, and bioactivity. The gut microbiota plays a key role in modulating the production, bioavailability and, thus the biological activities of phenolic metabolites, particularly after the intake of food containing high-molecular-weight polyphenols. The aim of this study was to investigate whether the polyphenolic components of Laurel and Myrtle aqueous extract have beneficial effects on rat health. The growth of lactic acid bacteria (LAB), β-glucuronidase, β-glucosidase, β-galactosidase activity, pH value, body weight change and food efficacy ratio after intragastric treatment of rats with Laurel and Myrtle extract at doses of 50 and 100 mg/kg for two weeks were investigated. The endogenous populations of colonic probiotic bacteria (Lactobacilli and Bifidobacteria) were counted on selective media. According to the obtained data, Laurel extract in the applied dose of 50 and 100 and Myrtle extract (100 mg/kg) positively affects the rats health by increasing the number of colonies of Lactobacilli and Bifidobacteria compared to the control group, causes changes in glycolytic enzymatic activity and minor change in antioxidative tissue activity. In addition, high doses of Laurel increase food efficiency ratio, while Myrtle has the same effect at a lower dose.     

Continuous separation of Sr, Y and some actinides by mixed solvent anion exchange and determination of 89,90Sr, 238,239Pu and 241Am in soil and vegetation samples

Methodology for the determination of ^89,90Sr, Am and Pu isotopes in complex samples is given. Methodology is based on simultaneous isolation of Sr, Y and actinides from samples by mixed solvent anion exchange chromatography, mutual separation of ^89,90Sr and ⁹⁰Y from actinides, mutual separation of Th, Pu and Am by extraction chromatography, quantitative determination of ^89,90Sr by Cherenkov counting and quantitative determination of Pu and Am isotopes in soil and vegetation samples by alpha spectrometry. It is shown that Y and Sr can be efficiently separated from alkaline, alkaline earth and transition elements as well as from lanthanides and actinides on the column filed by strong base anion exchanger in nitrate form and 0.25?M HNO₃ in mixture of ethanol and methanol as eluent. It is also shown that Pu, Am and Th strongly binds on the mentioned column, can be separated from number of elements and easily be eluted from column by water. After elution actinides were mutually separated on TRU column and electrodeposited on stainless steel disc. Examination of conditions of electrodeposition was shown that chloride-oxalate electrolyte with addition of DTPA in presence of sodium hydrogen sulphate in cell with cooling and rotating platinum anode enables deposition of actinides within 1?h by 0.8?A?cm^?2 current density. Obtained peaks FWHM for Pu, Am and Th isotopes are between 27 and 40?keV. Scanning electron microscopy picture and ED XRF analysis of electroplated discs showed that actinide deposition is followed by iron oxide formation on disc surface. The methodology was tested by determination of ^89,90Sr, Am and Pu isotopes in ERA proficiency testing samples (low level activity samples). Obtained results shows that ^89,90Sr, ²⁴¹Am and ^238,239Pu can be simultaneously separated on anion exchange column, ^89,90Sr can be determined by Cherenkov counting with a satisfactory accuracy and limit of determination within 1?C3?days after separation. ²⁴¹Am and ^238,239Pu can easily be separated on TRU column and determined after electrodeposition with acceptable accuracy within 1?day.     

High-pressure optical studies on R-line fluorescence lifetime in Al2O3:V2+

The effect of high hydrostatic pressure (up to 10.3?GPa) at room temperature on fluorescence lifetime τ for R line (²E→⁴A₂ transition) in ruby Al₂O₃:V²⁺ was studied. The performed studies show the linear increase of τ with increasing pressure. At 10.3?GPa, τ is about 1.36 times higher than at ambient pressure. The obtained trend was explained by a model which considered the effect of pressure on τ through an induced change of line position, inter-ionic distance, compressibility, and molecular polarizability. A good agreement between the calculated and experimental values for τ was obtained.     

Normal- and Reversed-Phase Behaviour of 16,17-Secoestrone Derivatives on Cyanopropyl-Bonded Silica Gel

The retention behaviour of a number of 16,17-secoestrone derivatives has been studied by LC and HPTLC on a polar cyanopropyl-bonded stationary phase using non-aqueous and aqueous-organic mobile phases. The retention behaviour has been discussed in terms of nature of the solute, eluent and stationary phase. The correlation between retention constants of 16,17-secoestrone derivatives obtained from reversed-phases and commercially available ACD log P software (Advanced Chemistry, Toronto, Canada) has also been examined.     

Combined experimental and computational study of cis-trans isomerism in bis(L-valinato)copper(II)

Heating of polycrystalline cis aquabis(L-valinato)copper(II) at 90 °C resulted in a dehydrated powder. Recrystallization from aqueous solution of the obtained product yielded anhydrous trans bis(L-valinato)copper(II). The X-ray crystal and molecular structures of trans bis(L-valinato)copper(II) and cis aquabis(L-valinato)copper(II) are presented. Molecular modeling calculations were attempted to resolve factors that influenced the isomerization and crystallization of either the aqua cis- or the anhydrous trans-isomer. Conformational analyses of trans- and cis-isomers were completed in vacuo and in crystal by molecular mechanics, and in aqueous solution by molecular dynamics (MD) simulations using the same force field. Although the conformers with trans-configuration are the most stable in vacuo, those with cis-configuration form more favorable intermolecular interactions. Consequently, both cis- and trans-isomers are predicted to be present in aqueous solution. According to the crystal structure simulations and predictions, cis-isomer requires water molecules to form energetically more stable crystal packings than trans-isomer. The MD modeling of the self-assembly of 16 bis(L-valinato)copper(II) complexes in aqueous solution for the first time predicted the crystallization nucleus formation to proceed from monomers to oligomers by Cu-to-O(carboxylato) and/or N-H···O(carboxylato) weak bonds; these oligomers then bind together via water molecules until they acquire the right positions for noncovalent bonding like in the experimental crystal structures. Fifty-nanosecond MD simulations accomplished for a system consisting of equal numbers of complexes and water molecules at 298 and 370 K suggested complete cis-to-trans transformation at the higher temperature. Prevalence of either cis- or trans-conformers in water upon dissolvation may explain the crystallization results.