Thermodynamics of Micellization from Heat‐Capacity Measurements

Differential scanning calorimetry (DSC), the most important technique for studying the thermodynamics of structural transitions of biological macromolecules, is seldom used in quantitative thermodynamic studies of surfactant micellization/demicellization. The reason for this could be ascribed to an insufficient understanding of the temperature dependence of the heat capacity of surfactant solutions (DSC data) in terms of thermodynamics, which leads to problems with the design of experiments and interpretation of the output signals. We address these issues by careful design of DSC experiments performed with solutions of ionic and nonionic surfactants at various surfactant concentrations, and individual and global mass‐action model analysis of the obtained DSC data. Our approach leads to reliable thermodynamic parameters of micellization for all types of surfactants, comparable with those obtained by using isothermal titration calorimetry (ITC). In summary, we demonstrate that DSC can be successfully used as an independent method to obtain temperature‐dependent thermodynamic parameters for micellization.     

Volatiles of Helichrysum italicum (Roth) G. Don from Croatia

Helichrysum italicum (Roth) G. Don is a flowering plant of the family Asteraceae. It is rich in oil that is used for different medicinal purposes and in fragrance industry. Volatile profile of four populations of H. italicum, collected from natural habitat in Dalmatia (Croatia), was analysed by capillary GC–MS. Sample from Bra? Island had α-trans-bergamotene (10.2%) and β-acoradiene (10.1%) as the majors, whereas sample collected on Biokovo Mt. was rich in neryl acetate (8.1%). β-Acoradiene was also the main constituent of sample collected near Tijarica, whereas rosifoliol (8.5%) was the most abundant constituent in sample collected near Makarska. Presented results show the influence of environmental conditions on chemical differentiation of the volatiles of H. italicum from Croatia.     

Influence of the Structure of Precursors on the Crystallization of PbTiO3 Thin Films

PbTiO₃ (PT) thin films and their respective sols derived from three lead sources have been studied in order to elucidate the role of the starting materials in the crystallization of the products. EXAFS analysis of sols revealed similar oligomeric Ti-units in PT precursors derived from lead oxide or lead 2-methoxyethoxide acetate and a significantly different local Ti neighborhood in those derived from lead acetate. Structural details of the perovskite phase in the thin films follow the same pattern of similarity.     

Determination of multi-class pharmaceuticals in wastewater by liquid chromatography–tandem mass spectrometry (LC–MS–MS)

An analytical method for multi-class pharmaceuticals determination in wastewater has been developed and validated. Target compounds were: sulfonamides (sulfadiazine, sulfaguanidine, sulfamethazine, sulfamethoxazole), fluoroquinolones (ciprofloxacin, enrofloxacin, norfloxacin), diaminopyrimidine (trimethoprim), anaesthetic (procaine), anthelmintic (praziquantel and febantel), and macrolide (roxithromycin). The method involves pre-concentration and clean-up by solid-phase extraction (SPE) using Strata-X extraction cartridges at pH 4.0. Target analytes were identified and quantitatively determined by liquid chromatography–tandem mass spectrometry using multiple reaction monitoring (MRM). Recoveries were higher than 50% with relative standard deviation (RSD) below 18.3% for three concentrations. Only for sulfaguanidine was low recovery obtained. Matrix effect was evaluated using matrix-matched standards. The method detection limit (MDL) was between 0.5 and 5 ng L⁻¹ in spiked water samples. The precision of the method, calculated as relative standard deviation, ranged from 0.5 to 2.0% and from 1.4 to 8.3 for intra-day and inter-day analysis, respectively. The described analytical method was used for determination of pharmaceuticals in effluent wastewaters from the pharmaceutical industry.     

Determination of total tin in canned food using inductively coupled plasma atomic emission spectroscopy

Tin is considered to be a priority contaminant by the Codex Alimentarius Commission. Tin can enter foods either from natural sources, environmental pollution, packaging material or pesticides. Higher concentrations are found in processed food and canned foods. Dissolution of the tinplate depends on the of food matrix, acidity, presence of oxidising reagents (anthocyanin, nitrate, iron and copper) presence of air (oxygen) in the headspace, time and storage temperature. To reduce corrosion and dissolution of tin, nowadays cans are usually lacquered, which gives a marked reduction of tin migration into the food product. Due to the lack of modern validated published methods for food products, an ICP-AES (Inductively coupled plasma-atomic emission spectroscopy) method has been developed and evaluated. This technique is available in many laboratories in the food industry and is more sensitive than atomic absorption. Conditions of sample preparation and spectroscopic parameters for tin measurement by axial ICP-AES were investigated for their ruggedness. Two methods of preparation involving high-pressure ashing or microwave digestion in volumetric flasks were evaluated. They gave complete recovery of tin with similar accuracy and precision. Recoveries of tin from spiked products with two levels of tin were in the range 99+/-5%. Robust relative repeatabilities and intermediate reproducibilities were <5% for different food matrices containing >30 mg/kg of tin. Internal standard correction (indium or strontium) did not improve the method performance. Three emission lines for tin were tested (189.927, 283.998 and 235.485 nm) but only 189.927 nm was found to be robust enough with respect to interferences, especially at low tin concentrations. The LOQ (limit of quantification) was around 0.8 mg/kg at 189.927 nm. A survey of tin content in a range of canned foods is given.     

Characterization of covalently inhibited extracellular lipase from Streptomyces rimosus by matrix-assisted laser desorption/ionization time-of-flight and matrix-assisted laser desorption/ionization quadrupole ion trap reflectron time-of-flight mass spectrometry: localization of the active site serine

A chemical modification approach combined with matrix-assisted laser desorption/ionization (MALDI) mass spectrometry was used to identify the active site serine residue of an extracellular lipase from Streptomyces rimosus R6-554W. The lipase, purified from a high-level overexpressing strain, was covalently modified by incubation with 3,4-dichloroisocoumarin, a general mechanism-based serine protease inhibitor. MALDI time-of-flight (TOF) mass spectrometry was used to probe the nature of the intact inhibitor-modified lipase and to clarify the mechanism of lipase inhibition by 3,4-dichloroisocoumarin. The stoichiometry of the inhibition reaction revealed that specifically one molecule of inhibitor was bound to the lipase. The MALDI matrix 2,6-dihydroxyacetophenone facilitated the formation of highly abundant [M + 2H](2+) ions with good resolution compared to other matrices in a linear TOF instrument. This allowed the detection of two different inhibitor-modified lipase species. Exact localization of the modified amino acid residue was accomplished by tryptic digestion followed by low-energy collision-induced dissociation peptide sequencing of the detected 2-(carboxychloromethyl)benzoylated peptide by means of a MALDI quadrupole ion trap reflectron TOF instrument. The high sequence coverage obtained by this approach allowed the confirmation of the site specificity of the inhibition reaction and the unambiguous identification of the serine at position 10 as the nucleophilic amino acid residue in the active site of the enzyme. This result is in agreement with the previously obtained data from multiple sequence alignment of S. rimosus lipase with different esterases, which indicated that this enzyme exhibits a characteristic Gly-Asp-Ser-(Leu) motif located close to the N-terminus and is harboring the catalytically active serine residue. Therefore, this study experimentally proves the classification of the S. rimosus lipase as GDS(L) lipolytic enzyme.     

Thermal reaction of [3,4]-benzo-8-substituted-3Z,5Z,7E-octatetraenes and quantum-chemical study of the (8π,6π)-electrocyclisation

The first example of thermal (8π,6π)-electrocyclisation of 1,3,5,7-octatetraene with one double bond embedded in an aromatic moiety is described. By this process, [3,4]-benzo-8-substituted octatetraene derivatives, the cis,trans-1-(o-vinylphenyl)-4-(R = Me, Ph, 2-furyl)buta-1,3-dienes were transformed to a new endo-7-(R = Me, Ph, 2-furyl) and exo-7-(R = Me)-2,3-benzobicyclo[4.2.0]octa-2,4-dienes. Mechanism of reaction was also studied by DFT quantum-chemical calculations. The M06/6-311+G(d,p)//M06/6-31+G(d,p) calculations indicate that formation of the single endo-isomer in the case of phenyl and 2-furyl substituents is determined by higher activation barriers for exo-6π-electrocyclisation than for 8π-cycloreversion.     

Development and validation of an HPLC method for determination of ziprasidone and its impurities in pharmaceutical dosage forms

Ziprasidone is known as a novel "atypical" or "second-generation" antipsychotic drug. A sensitive and reproducible method was developed and validated for determination of ziprasidone and its major impurities, which are significantly different in polarity. The separation is performed on a Waters Spherisorb octadecylsilyl 1 column (5.0 microm particle size, 250 x 4.6 mm id) using a gradient with mobile phase A [buffer-acetonitrile (80+20, v/v)] and mobile phase B [buffer-acetonitrile (10+90, v/v)] at a working temperature of 25 degrees C. The buffer was 0.05 M KH2PO4 solution with an addition of 10 mL triethylamine/L solution, adjusted to pH 2.5 with orthophosphoric acid. The flow rate was 1.5 mL/min, and the eluate was monitored at 250 nm using a diode array detector. Optimization of the experimental conditions was performed using partial least squares regression, for which four factors were selected for optimization: buffer concentration, buffer pH, triethylamine concentration, and temperature. The proposed validated method is convenient and reliable for the assay and purity control in both raw materials and dosage forms.