Large volume injection in ion chromatography Separation of rubidium and strontium for on-line inductively coupled plasma mass spectrometry determination of strontium isotope ratios

Large volume injection, up to 5 mL, was evaluated and optimised for the on-line ion chromatographic separation of Rb and Sr before ICP-MS measurement of Sr isotope ratios. Flat-topped chromatographic peaks, ideally suited for multicollector ICP-MS isotope ratio measurements, could be obtained when the composition of the mobile phase (nitric acid and 18-crown-6 ether) was identical to the matrix of the sample. Under those conditions rubidium eluted at the dead volume of the column while strontium produced a flat-topped transient signal with several minutes of stable plateau. On-line data acquisition during several minutes at the plateau of Sr signal allowed high precision Sr isotope ratio measurement. The developed procedure was evaluated for Sr isotope ratio measurements on different types of samples, including cider, apples, apple leaves, and soil extracts, in the frame of a long-term project aiming at origin authentication using strontium isotope ratio measurements. It was observed that sample matrix caused broadening of the strontium chromatographic peak and loss of flat-topped peak profile. Under those circumstances the addition of the complexing crown-ether 18-crown-6 both to samples and chromatographic eluent provided two distinct advantages. First, a drastic increase in the retention of strontium was observed which could be modulated by increasing the concentration of nitric acid in the eluent up to 900 mM. This increase in the eluent HNO(3) concentration allowed the application of the method to acid soil digests and other high acidity samples. Second, the matrix of the sample did not affect any more the chromatographic peak profile and similar chromatographic separations could be obtained for samples and standards maintaining the flat-topped Sr peak profile. Sample preparation consisted of a simple 1:10 dilution of the cider or pre-treated solid samples by adding HNO(3) (900 mM) and 18-crown-6 ether (5mM) to obtain similar composition in the sample solution and the HPLC eluent.     

Detection of relative dimer and rotamer concentrations of diacetamide in different solvents by FT-IR spectroscopy and DFT calculations

The relative rotamer, dimer and tautomer concentrations of diacetamide have been studied by means of infrared spectroscopy, with the recorded spectra being analyzed employing results from density functional theory calculations. It is observed that the cis–trans monomeric form of diacetamide (1) is found to be the most stable isomer in all studied solvents, with trans–trans diacetamide (2) being found to be 20% of total diacetamide in methanol. While the dimer form of diacetamide (3) is present only in carbontetrachloride (about 34% of the total), its tautomeric forms (4, 5) are not favorable in any of the studied solvents.     

Regular and extremal solutions for difference equations with generalized phi-Laplacian

Non-oscillatory solutions for second-order difference equations with generalized phi-Laplacian are studied. Solutions are classified according to the asymptotic behaviour as regular or extremal solutions. Their existence and possible coexistence are investigated as well. In particular, the existence of infinitely many extremal solutions for equations with the discrete mean curvature operator is proved by means of an iterative method. This paper is completed by examples and some open problems.     

Singularities of linear systems and the Waring problem

The Waring problem for homogeneous forms asks for additive decomposition of a form into powers of linear forms. A classical problem is to determine when such a decomposition is unique. In this paper we answer this question when the degree of is greater than the number of variables. To do this we translate the algebraic statement into a geometric one concerning the singularities of linear systems of with assigned singularities.

     

Association of the T allele of an intronic single nucleotide polymorphism in the colony stimulating factor 1 receptor with Crohn's disease: a case-control study

BACKGROUND: Polymorphisms in several genes (NOD2, MDR1, SLC22A4) have been associated with susceptibility to Crohn's disease. Identification of the remaining Crohn's susceptibility genes is essential for the development of disease-specific targets for immunotherapy. Using gene expression analysis, we identified a differentially expressed gene on 5q33, the colony stimulating factor 1 receptor (CSF1R) gene, and hypothesized that it is a Crohn's susceptibility gene. The CSF1R gene is involved in monocyte to macrophage differentiation and in innate immunity. METHODS: Patients provided informed consent prior to entry into the study as approved by the Institutional Review Board at LSU Health Sciences Center. We performed forward and reverse sequencing of genomic DNA from 111 unrelated patients with Crohn's disease and 108 controls. We also stained paraffin-embedded, ileal and colonic tissue sections from patients with Crohn's disease and controls with a polyclonal antibody raised against the human CSF1R protein. RESULTS: A single nucleotide polymorphism (A2033T) near a Runx1 binding site in the eleventh intron of the colony stimulating factor 1 receptor was identified. The T allele of this single nucleotide polymorphism occurred in 27% of patients with Crohn's disease but in only 13% of controls (X2 = 6.74, p < 0.01, odds ratio (O.R.) = 2.49, 1.23 < O.R. < 5.01). Using immunohistochemistry, positive staining with a polyclonal antibody to CSF1R was observed in the superficial epithelium of ileal and colonic tissue sections. CONCLUSIONS: We conclude that the colony stimulating factor receptor 1 gene may be a susceptibility gene for Crohn's disease.     

On intermediate solutions and the Wronskian for half-linear differential equations

The asymptotic behavior of nonoscillatory solutions of the half-linear differential equation is studied. In particular, two Wronskian-type functions, which have some interesting properties, similar to the one of the Wronskian in the linear case, are given. Using these properties and suitable integral inequalities, the existence of the so-called intermediate solutions is examined and an open problem is solved.     

Synthesis,characterization, and electrochemical studies of new 5‐ and 6‐nitro N‐acyl‐1H‐indazoles

Two series of new N‐1 acylindazoles containing 5‐ or 6‐nitro groups were synthesized with moderate to good yields and characterized by IR and NMR spectroscopy. Cyclic voltammetry in aprotic media was utilized for the electrochemical characterization of the compounds. The calculated reduction potentials in physiological conditions are similar to those of known commercial antichagasic drugs. Therefore, the novel series reported herein are prospective candidates for antichagasic biological evaluation. Theoretical calculation results indicate that the studied dinitro derivatives undergo a single step reduction process because of the energy proximity of their radical and anionic state. Copyright © 2011 John Wiley & Sons, Ltd.     

Quinone methide generation via photoinduced electron transfer

Photochemical activation of water-soluble 1,8-naphthalimide derivatives (NIs) as alkylating agents has been achieved by irradiation at 310 and 355 nm in aqueous acetonitrile. Reactivity in aqueous and neat acetonitrile has been extensively investigated by laser flash photolysis (LFP) at 355 nm, as well as by steady-state preparative irradiation at 310 nm in the presence of water, amines, thiols, and ethyl vinyl ether. Product distribution analysis revealed fairly efficient benzylation of the amines, hydration reaction, and 2-ethoxychromane generation, in the presence of ethyl vinyl ether, resulting from a [4 + 2] cycloaddition onto a transient quinone methide. Remarkably, we found that the reactivity was dramatically suppressed under the presence of oxygen and radical scavengers, such as thiols, which was usually associated with side product formation. In order to unravel the mechanism responsible for the photoreactivity of these NI-based molecules, a detailed LFP study has been carried out with the aim to characterize the transient species involved. LFP data suggest a photoinduced electron transfer (PET) involving the NI triplet excited state (λ(max) 470 nm) of the NI core and the tethered quinone methide precursor (QMP) generating a radical ions pair NI(?-) (λ(max) 410 nm) and QMP(?+). The latter underwent fast deprotonation to generate a detectable phenoxyl radical (λ(max) 390 and 700 nm), which was efficiently reduced by the radical anion NI(?-), generating detectable QM. The mechanism proposed has been validated through a LFP investigation at 355 nm exploiting an intermolecular reaction between the photo-oxidant N-pentylnaphthalimide (NI-P) and a quaternary ammonium salt of a Mannich base as QMP (2a), in both neat and aqueous acetonitrile. Remarkably, these experiments revealed the generation of the model o-QM (λ(max) 400 nm) as a long living transient mediated by the same reactivity pathway. Negligible QM generation has been observed under the very same conditions by irradiation of the QMP in the absence of the NI. Owing to the NIs redox and recognition properties, these results represent the first step toward new molecular devices capable of both biological target recognition and photoreleasing of QMs as alkylating species, under physiological conditions.     

Comparison results for oscillation of nonlinear differential equations

((without abstract.))     

Porous biomaterials obtained using supercritical CO 2- water emulsions

Highly porous, hydrophilic porous matrices were fabricated by using a high internal phase supercritical-CO2 (scCO2) emulsion templating technique. The novel aspect of the work resides in the combination of a natural biopolymer (dextran) as the building component of the matrices and of an environmentally benign solvent (supercritical-CO2) as the pore-generating phase. The synthetic route to the porous biomaterials involved the preliminary functionalization of the dextran chains with methacrylic moieties, formation of a scCO2-in-water concentrated emulsion, and curing of the external phase of the emulsion by radical polymerization. As the emulsion stabilizer a perfluoropolyether surfactant was chosen. The matrices obtained exhibit highly interconnected, trabecular morphologies. The porous biomaterial morphologies were qualitatively characterized by scanning electron microscopy (SEM) and the evaluation of void and interconnect sizes was carried out on the micrographs taken with the light microscope. To tailor the morphologies of the porous structures, the influence of the volume fraction of the internal phase and of the surfactant/internal phase ratio was investigated. It was established that the variation of the volume fraction of the internal phase exerted only a limited influence on void and interconnect sizes. On the contrary the increase of surfactant concentration alters dramatically the distribution of void size, a large proportion of the void space enclosed within the matrix being attributable to voids with a diameter exceeding 100 microm. The free toxic solvent process of fabrication of the porous structures, the high water content, the expected biocompatibility, and the mechanical properties that resemble natural tissues make these porous hydrogels potentially useful for tissue engineering applications.