Mechanically responsive films of variable hydrophobicity made of polyelectrolyte multilayers

Mechanically responsive surfaces that allow to switch reversibly from a hydrophobic to a hydrophilic substrate are reported. The surfaces are constituted of polyelectrolyte multilayers deposited on modified charged silicone sheets. n bilayers of poly(allylamine)-Nafion (PAH-Naf) and m bilayers of poly(allylamine)-poly(acrylic acid) (PAH-PAA) composed the multilayers. A (PAH-Naf)(n) film possesses a water contact angle of around 105 degrees, whereas the contact angle of a (PAH-Naf)(4)-(PAH-PAA)(m) multilayer is around 50 degrees. When such a film with m < 5 and terminated by PAA is stretched out, its water contact angle increases up to around 100 degrees. Successive elongation/retraction cycles allow the water contact angle to alternate reversibly between 100 and 57 degrees indicating the reversible mechanical responsive nature of the film.     

Thermally produced biodegradable scaffolds for cartilage tissue engineering

A novel process was developed to fabricate biodegradable polymer scaffolds for tissue engineering applications, without using organic solvents. Solvent residues in scaffolds fabricated by processes involving organic solvents may damage cells transplanted onto the scaffolds or tissue near the transplantation site. Poly(L-lactic acid) (PLLA) powder and NaCl particles in a mold were compressed and subsequently heated at 180 degrees C (near the PLLA melting temperature) for 3 min. The heat treatment caused the polymer particles to fuse and form a continuous matrix containing entrapped NaCl particles. After dissolving the NaCl salts, which served as a porogen, porous biodegradable PLLA scaffolds were formed. The scaffold porosity and pore size were controlled by adjusting the NaCl/PLLA weight ratio and the NaCl particle size. The characteristics of the scaffolds were compared to those of scaffolds fabricated using a conventional solvent casting/particulate leaching (SC/PL) process, in terms of pore structure, pore-size distribution, and mechanical properties. A scanning electron microscopic examination showed highly interconnected and open pore structures in the scaffolds fabricated using the thermal process, whereas the SC/PL process yielded scaffolds with less interconnected and closed pore structures. Mercury intrusion porosimetry revealed that the thermally produced scaffolds had a much more uniform distribution of pore sizes than the SC/PL process. The utility of the thermally produced scaffolds was demonstrated by engineering cartilaginous tissues in vivo. In summary, the thermal process developed in this study yields tissue-engineering scaffolds with more favorable characteristics, with respect to, freedom from organic solvents, pore structure, and size distribution than the SC/PL process. Moreover, the thermal process could also be used to fabricate scaffolds from polymers that are insoluble in organic solvents, such as poly(glycolic acid). Cartilage tissue regenerated from thermally produced PLLA scaffold.     

β-蒎烯和马来酸酐的反应及产物表征

研究了β-蒎烯和马来酸酐的烯反应、溶剂中自由基共聚反应和本体热共聚反应,得到了β-蒎烯和马来酸酐烯反应产物和共聚产物,并用IR、1H NMR、13C NMR、GPC、DSC进行表征,研究了引发剂浓度、溶剂体系、单体配比、温度等因素对产物的影响.对聚合物进行皂化改性,测量了皂化物浓度对水表面张力的影响.     

Study on oxidation of polymers treated by high LET radiation

The oxidation of medical silicone rubber and segmented polyether urethane which were bombarded with 11.2 MeV Si⁺ or F⁺ at the dose of 5 × 10¹⁴ ions/cm² was studied. In XPS measurements, it was found that the oxygen concentration on the surface of the implanted polymeric membranes had been increasing in three months at least. ESR measurement showed that some free radicals existed in these membranes and their quantities decreased with time. Chemical analysis proved that peroxides were generated in the γ irradiated membranes. The reason for the increasing of oxygen concentration was that free radicals combined with oxygen in the air and produced peroxides on the membrane surface. Moreover, in order to demonstrate the radiation mechanism, low LET (γ rays) radiation of such polymeric membranes was carried out for comparison     

Thiol- and disulfide-modified oligonucleotide monolayer structures on polycrystalline and single-crystal Au(111) surfaces

We provide a comprehensive study of single- (ss) and double-strand (ds) oligonucleotides with either 25 or 10 bases or base pairs (bp) immobilized on polycrystalline and single-crystal Au(111) surfaces. The study is based on X-ray photoelectron spectroscopy, cyclic and differential pulse voltammetry, interfacial capacitance data, and electrochemical scanning tunnelling microscopy (in situ STM). The sequences used were the 25-bp sequence from the BRCA1 gene (25-mer), while the 10-bp oligonucleotides contained solely linear adenine and thymine sequences. The oligonucleotides were modified by the dimethoxytrityl group (DMT) via a disulfide group [DMT-S-S-ss25-mer and DMT-S-S-ds(AT)₁₀], a pure disulfide group (A₁₀-S-S-T₁₀), or a thiol group [HS-ss25-mer and HS-ds-(AT)₁₀], all via a hexamethylene linker. The overall pattern suggests strategies for controlled adsorption of DNA-based molecules and recognition of complementary strands or other molecules.     

Synthesis and H-NMR complexation studies of alkalimetal bithioxanthylidene crown ether complexes

Two synthetic routes to a novel class of sterically overcrowded alkenes, bithioxanthylidene crown ethers 1, are described. The ¹H spin-lattice relaxation times (T₁) of the crown ethers as well as those of the corresponding complexes with Li⁺, Na⁺, K⁺, Rb⁺ and Cs⁺ in CDCl₃ were measured and the results were interpreted in terms of complexation affinities.     

Adsorption of atomic hydrogen at a nanostructured electrode of polyacrylate-capped Pt nanoparticles in polyelectrolyte

Atomic hydrogen electrosorption is reported at crystallite sites of polyacrylate-capped Pt nanoparticles (d = 2.5 +/- 0.6 nm), by assembling nanostructured electrodes of polyacrylate-Pt nanocrystallites layer-by-layer in a cationic polyelectrolyte, poly(diallyldimethylammonium chloride). Cyclic voltammetry in 1 M H2SO4 revealed a strongly adsorbed hydrogen state and a weakly adsorbed hydrogen state assigned to adsorption at (100) and (110) sites of the modified nanocrystallites, respectively. Resolving hydrogen adsorption states signifies that surface capping by the carboxylate groups is not irreversibly blocking hydrogen adsorption sites at the modified Pt nanoparticle surface. Adsorption peak currents increased with increasing the number of layers up to 16 bilayers, indicating the feasibility of nanoparticle charging via interparticle charge hopping and the accessibility of adsorption states within the thickness of the nanoparticle/polyelectrolyte multilayers. Despite similarity in hydrogen adsorption in the cyclic voltammorgrams in 1 M H2SO4, negative shifts in adsorption potentials were measured at the nanocrystallite Pt-polyelectrolyte multilayers relative to a polycrystalline bulk Pt surface. This potential shift is attributed to a kinetic limitation in the reductive hydrogen adsorption as a result of the Pt nanoparticle surface modification and the polyelectrolyte environment.     

Evaluations of solid electrodes for use in voltammetric monitoring of heavy metals in samples from metallurgical nickel industry

Evaluation of different solid electrode systems for detection of zinc, lead, cobalt, and nickel in process water from metallurgical nickel industry with use of differential pulse stripping voltammetry has been performed. Zinc was detected by differential pulse anodic stripping voltammetry (DPASV) on a dental amalgam electrode as intermetallic Ni–Zn compound after dilution in ammonium buffer solution. The intermetallic compound was observed at –375 mV, and a linear response was found in the range 0.2–1.2 mg L^–1 (r²=0.98) for 60 s deposition time. Simultaneous detection of nickel and cobalt in the low g L^–1 range was successfully performed by use of adsorptive cathodic stripping voltammetry (AdCSV) of dimethylglyoxime complexes on a silver–bismuth alloy electrode, and a good correlation was found with corresponding AAS results (r²=0.999 for nickel and 0.965 for cobalt). Analyses of lead in the g L^–1 range in nickel-plating solution were performed with good sensitivity and stability by DPASV, using a working electrode of silver together with a glassy carbon counter electrode in samples diluted 1:3 with distilled water and acidified with H₂SO₄ to pH 2. A new commercial automatic at-line system was tested, and the results were found to be in agreement with an older mercury drop system. The stability of the solid electrode systems was found to be from one to several days without any maintenance needed.     

All-solid-state carbonate-selective electrode based on a molecular tweezer-type neutral carrier with solvent-soluble conducting polymer solid contact

Carbonate-selective membranes were prepared by incorporating a molecular tweezer-type carbonate-selective neutral carrier [N,N-dioctyl-3alpha,12alpha-bis(4-trifluoroacetylbenzyloxy)-5beta-cholan-24-amide] into a room temperature vulcanizing-type silicone rubber (3140 RTV-SR) matrix, and deposited on the planar-type electrodes (Pt containing Ag/AgCl electrodes formed on a ceramic plate) with and without an intermediary conducting polymer layer. Two types of solvent-soluble conducting polymers [poly(1-hexyl-3,4-dimethyl-2,5-pyrrolylene) or poly(3-octylthiophene-2,5-diyl)] have been examined as the solid contact material. Potentiometric properties of the resultant all-solid-state electrodes were evaluated in terms of their carbonate selectivity, response slope, potential stability and reproducibility. The sensitivity and carbonate selectivity of the SR membrane-based all-solid-state electrodes with conducting polymer solid contact were comparable to those of conventional electrodes. Experimental results also showed that the intermediary conducting polymer layer used in the all-solid-state electrodes greatly reduces the interference from dissolved oxygen.