Oxygen-flask combustion of accumulated organophosphorus pesticides for monitoring water pollution

A procedure is described for the determination of the total concentration of organophosphorus pesticides in aqueous solution based on conversion of the compounds to orthophosphoric acid by oxygen-flask combustion and spectrophotometric determination as phosphomolybdenum blue. The procedure is particularly sensitive when preceded by efficient and selective accumulation of pesticides. The adsorption of malathion, parathion and phosalone on Amberlite XAD-4 resin from 1 l of 7–36 μM water solutions, followed by combustion of 500 μl of eluate yields of orthophosphoric acid with 90–105% recoveries. The detection limit is ca. 150 ng ml^?1 pesticide in an aqueous sample. Inorganic phosphates and most of some commonly present non-pesticide phosphorus compounds are eliminated from the water sample during the adsorption step. In combination with a test for monitoring traces of cholinesterase inhibitors in surface waters, the determination of the total amount of organophosphorus pesticides as a cumulative parameter offers reliable information on the pollution level of the water environment. Application of such a combined procedure to a pond water from an apple orchard showed good correlation between phosphrus content and the cholinesterase inhibition.     

Triplex and quadruplex DNA structures studied by electrospray mass spectrometry

DNA triplex and quadruplex structures have been successfully detected by electrospray ionization mass spectrometry (ESI-MS). Circular dichroism and UV-melting experiments show that these structures are stable in 150 mM ammonium acetate at pH 7 for the quadruplexes and pH 5.5 for the triplexes. The studied quadruplexes were the tetramer [d(TGGGGT)](4), the dimer [d(GGGGTTTTGGGG)](2), and the intramolecular folded strand dGGG(TTAGGG)(3), which is an analog of the human telomeric sequence. The absence of sodium contamination allowed demonstration of the specific inclusion of n - 1 ammonium cations in the quadruplex structures, where n is the number of consecutive G-tetrads. We also detected the complexes between the quadruplexes and the quadruplex-specific drug mesoporphyrin IX. MS/MS spectra of [d(TGGGGT)](4) and the complex with the drug are also reported. As the drug does not displace the ammonium cations, one can conclude that the drug binds at the exterior of the tetrads, and not between them. For the triplex structure the ESI-MS spectra show the detection of the specific triplex, at m/z values typically higher than those typically observed for duplex species. Upon MS/MS the antigene strand, which is bound into the major groove of the duplex, separates from the triplex. This is the same dissociation pathway as in solution. To our knowledge this is the first report of a triplex DNA structure by electrospray mass spectrometry.     

Conformation of DNA modified by monofunctional Ru(II) arene complexes: recognition by DNA binding proteins and repair. Relationship to cytotoxicity

We analyzed DNA duplexes modified at central guanine residues by monofunctional Ru(II) arene complexes [(eta(6)-arene)Ru(II)(en)(Cl)](+) (arene = tetrahydroanthracene or p-cymene, Ru-THA or Ru-CYM, respectively). These two complexes were chosen as representatives of two different classes of Ru(II) arene compounds for which initial studies revealed different binding modes: one that may involve DNA intercalation (tricyclic-ring Ru-THA) and the other (mono-ring Ru-CYM) that may not. Ru-THA is approximately 20 times more toxic to cancer cells than Ru-CYM. The adducts of Ru-THA and Ru-CYM have contrasting effects on the conformation, thermodynamic stability, and polymerization of DNA in vitro. In addition, the adducts of Ru-CYM are removed from DNA more efficiently than those of Ru-THA. Interestingly, the mammalian nucleotide excision repair system has low efficiency for excision of ruthenium adducts compared to cisplatin intrastrand crosslinks.     

Synergistic mechanisms of β-diketone derivatives and zinc-calcium soaps in PVC stabilisation

It has been possible to explain the mechanisms of stabilisation and of the synergistic effects of the β-diketone derivatives claimed in a patent as new stabilisers for improving the efficiency of those recipes based upon zinc and calcium soaps in the prevention of the initial discoloration of poly(vinyl chloride).Using chlorohexene as a model compound for allylic chloride structures and benzoylacetone as a model compound for enolised β-diketone derivatives, it has been shown that the benzoylacetone can substitute allylic chlorine atoms through a C-alkylation reaction which takes place only in the presence of ZnCl₂ as catalyst. This reaction drastically changes the percentage of the enol and causes the appearance of two bands at 1720 cm^?1 and 1680 cm^?1 in the infra-red spectrum due to the ketonic structures During the processing of the PVC on a rolling mill at 180°C in the presence of zinc and calcium stearates and benzoylacetone there is grafting of the ketone derivative through a C-alkylation reaction. There is a closed parallelism between the influence of the benzoylacetone on the dehydrochlorination of the chlorohexene and on the accumulation of chloride ions in the polymer matrix in the presence of zinc and calcium stearate. The synergistic effect of the benzoylacetone in the prevention of the initial discoloration is related to the substitution reaction through a C-alkylation which takes place only in the presence of zinc stearate which generates ZnCl₂ which, in turn, acts as a catalyst for both the C-alkylation and dehydrochlorination.     

Cars study of vibrationally excited H2 produced in formaldehyde dissociation

Coherent anti-Stokes Raman scattering (CARS) has been used to observe H₂ from H₂CO + hv H₂ + CO. Photolysis of K = 1 (ortho) lines of the 2¹4¹ S₁ ← S₀ transition produced no para-H₂ (<4% statistical); and demonstrated nuclear spin conservation. H₂ states v = 1, 2 and 3 were comparably populated.     

Possibilities and limitations of an enzyme-linked immunosorbent assay for the detection of 1-nitropyrene in air particulate matter

ELISAs (enzyme-linked immunosorbent assays) are generally used in environmental analytical chemistry for screening purposes. In this work the applicability of a polyclonal-based 1-nitropyrene-ELISA for the quantification of the target analyte in air particulate matter was investigated. Validation was performed using an HPLC method with fluorescence detection of the reduced form of 1-nitropyrene. It was found that the immunoassay is not only sensitive for the target analyte but to a certain extent also for other cross-reacting molecules present in the sample, such as 2-nitropyrene and 2-nitrofluoranthene, which were identified by GC-HRMS and are considered to be products of photochemically induced reactions of pyrene or fluoranthene, respectively. The degree of correlation between ELISA and HPLC results for collected samples of air particulate matter was inversely dependent on the distance between the sampling location and the source.     

On the affinity of cytosine towards electrophiles

Ab initio SCF computations on the intrinsic preferences of the H⁺, CH ₃ ⁺ and C₂H ₅ ⁺ cations towards the two principal sites of protonation or alkylation on cytosine, N₃ or O₂, show that this preference undergoes a continuous modification with the increase in size and complexity of the cation. N₃ is the preferred site of fixation of H⁺, O₂ the preferred site of C₂H ₅ ⁺ , while CH ₃ ⁺ has no marked preference. The exchange repulsion term of the binding energy appears responsible for the preference of C₂H ₅ ⁺ for O₂.This work was supported by the Ligue Francaise contre le Cancer and the National Foundation for Cancer Research (USA)     

First anhydrous gold perchlorato complex: ClO(2)Au(ClO(4))(4). Synthesis and molecular and crystal structure analysis

Chlorine trioxide, Cl(2)O(6), reacts with Au metal, AuCl(3), or HAuCl(4).nH(2)O to yield the well-defined chloryl salt, ClO(2)Au(ClO(4))(4). The crystal and molecular structure of ClO(2)Au(ClO(4))(4) was solved by a Rietveld analysis of powder X-ray diffraction data. The salt crystallizes in a monoclinic cell, space group C2/c, with cell parameters a = 15.074(5), b = 5.2944(2), and c = 22.2020(2) A and beta = 128.325(2) degrees. The structure displays discrete ClO(2)(+) ions lying in channels formed by Au(ClO(4))(4)(-) stacks. Au is located in a distorted square planar environment: Au-O = 1.87 and 2.06 A. [ClO(4)] groups are monodentate with ClO(b) = 1.53 and ClO(t) = 1.39 A (mean distances; O(b), oxygen bonded to Au; O(t), free terminal oxygen). A full vibrational study of the Au(ClO(4))(4)(-) anion is supported by DFT calculations.     

Towards stationary phases for chromatography on a microchip: molded porous polymer monoliths prepared in capillaries by photoinitiated in situ polymerization as separation media for electrochromatography

Photoinitiated free radical polymerization has been used for the preparation of porous polymer monoliths within UV transparent fused silica capillaries and quartz tubes. These formats were used as models for the preparation of the separation media within channels of microfabricated devices. A mixture of ethylene dimethacrylate, butyl methacrylate, and 2-acrylamido-2-methyl-1-propanesulfonic acid was polymerized in the presence of a porogenic solvent consisting of 1-propanol, 1,4-butanediol, and water at room temperature under UV irradiation. Modification of the porogen composition enables the tailoring of pore size within the broad range from ca. 100 to 4000 nm. Scanning electron micrographs confirmed the homogeneity of the porous structure of the materials prepared, even in a quartz tube with a diameter as large as 4 mm. Separation properties of the resulting capillary columns were tested in capillary electrochromatography (CEC) mode using a mixture of thiourea and eight aromatic compounds. Plate number as high as 210 000 plates/m were found for a capillary column with optimized porous properties. The monolithic columns were also able to separate mixtures of peptides.     

Formation and reactions of metal-metal bonded heterobimetallic (C5H4PR2)-bridged (Zr-Ir) and (Zr-Rh) complexes: evidence for the participation of metal hydride intermediates

Treatment of the complexes [(C(5)H(4)PR(2))(2)Zr(CH(3))(2)](b: R = isopropyl; c: R = cyclohexyl) with the reagent HIr(CO)(PPh(3))(3) (2b) yield the heterobimetallic complexes [mu-C(5)H(4)PR(2))(2)(H(3)C-Zr-Ir(CO)(PPh(3)))] (4b, 4c) with evolution of methane. The reaction of the -PPh(2) substituted analogue with initially yields an intermediate [(H(3)C)(2)Zr(mu-C(5)H(4)PPh(2))(2)Ir(H)(CO)(PPh(3))] 5a, that still contains both methyl groups at zirconium and does not contain a metal-metal bond. At room temperature, the intermediate reacts further with methane formation to eventually yield the (Zr-Ir) complex 4a. The corresponding [mu-C(5)H(4)PR(2))(2)(H(3)C-Zr-Rh(CO)(PPh(3)))] complexes 3a (R = Ph) and 3b (R = isopropyl) react cleanly with isopropyl alcohol to liberate methane and yield the corresponding [mu-C(5)H(4)PR(2))(2)(Me(2)CHO-Zr-Rh(CO)(PPh(3)))] products (7a, 7b). Carefully monitoring the reaction of with Me(2)CHOH by NMR revealed that the Zr-Rh functionality is attacked first to give the intermediate [Me(Me(2)CHO)Zr([micro sign]-C(5)H(4)PR(2))(2)Rh(H)(CO)(PPh(3))] (6b). This intermediate then reacts further to cleave off methane and re-form the (Zr-Rh) metal-metal bond to yield the product 7b. The tetrametallic mu-oxo-(Zr-Rh) metallocene derivate 11a was obtained starting from the (Zr-Rh) complex 3a and it was characterized by X-ray diffraction. It may be that this reaction is also initiated by H-OH addition to the [Zr-Rh] metal-metal bond.