Study of the acidity of H3PW12O40 supported on activated carbon by microcalorimetry and methanol dehydration reaction

H₃PW₁₂O₄₀/activated carbon catalysts have been studied by microcalorimetry and by the dehydration of methanol to dimethyl ether. It has been shown that the acidity of the polyacid is greatly reduced upon grafting on activated carbon. The decrease is so high that, at low polyanion loadings, the catalysts are relatively inactive in the dehydration of methanol to dimethyl ether.     

Analyse conformationnelle de derives carbonylés du furanne et du thiophène par utilisation de la position et de l'intensite des bandes infrarouges

The carbonyl bands of 2-formyl and 3-formyl-furans [¹⁸O] are determined and explained. The magnitude of the inductive and mesomeric effects in 2-acyl and 3-acyl-thiophenes and furans is discussed on the basis of a comparison of the frequencies and the intensities of the v(CO) and v(CC) bands. The conformational preference of some aroyl-furans and aroyl-formyl-furans and the rotation around the C(Ar)-C(O) bonds are related to these parameters.     

Helicity‐Encoded Molecular Strands: Efficient Access by the Hydrazone Route and Structural Features

Control over the folding of molecular strands may be achieved by appropriate choice of the constituting subunits, in particular for chains of specific heterocycles such as sequences of directly connected pyridine (py) and pyrimidine (pym) rings, which are known to fold into extended helical structures. Since the hydrazone (hyz) group represents an isomorphic analogue of a py site, the condensation of hydrazine and carboxaldehyde derivatives of pym offers a very efficient approach to strands incorporating hyz instead of py units and constituted by sequences of alternating hyz and pym groups. A series of such strands of different lengths, up to ten hyz units, i.e., 1 – 7 , were synthesized. Their spectral properties indicate that they fold indeed into helical shapes. Extensive characterization was performed in solution by ¹HNMR spectroscopy and in the solid state by determination of the crystal structures of eight such strands. They all display the expected helical geometry with up to 3 ¹/₃ turns and direct stacking contacts. The efficiency and flexibility of the synthetic approach as well as its wide potential for generation of diversity through lateral decoration make the (hyz? pym) subunit a particularly attractive helicity codon.     

Regioselectivity of Birch reductive alkylation of biaryls

[reaction: see text] The regioselectivity of the Birch reductive alkylation of polysubstituted biaryls has been investigated. Results indicate that regioselectivity is affected by the electronic nature of substituents on both aromatic rings. The electron-rich 3,5-dimethoxyphenyl moiety is selectively reduced and then alkylated, while phenols and aniline are not dearomatized under these conditions. Biaryls possessing a phenol moiety are alkylated on the second ring, providing that the acidic proton has been removed prior to the Li/NH3 reduction.     

Alkyl- and aryl-substituted corroles. 4. Solvent effects on the electrochemical and spectral properties of cobalt corroles

Solvent effects on the electrochemistry and spectroscopic properties of alkyl- and aryl-substituted corroles in nonaqueous media are reported. The oxidation and reduction of six compounds containing zero to seven phenyl or substituted phenyl groups on the macrocycle were studied in four different nonaqueous solvents (CH(2)Cl(2), PhCN, THF, and pyridine) containing 0.1 M tetra-n-butylammonium perchlorate. Dimers were formed upon oxidation of all corroles in CH(2)Cl(2), but this was not the case in the other three solvents, where either monomers or dimers were formed upon oxidation depending upon the solvent Gutmann donor number and the number or location of aryl substituents on the macrocycle. The half-wave potentials were analyzed as a function of the number of aryl substituents on the macrocycle as well as the concentration of added pyridine to PhCN solutions of the compound, and these data were combined with data from the spectroelectrochemistry experiments to determine the stoichiometry of the species actually in solution after the first oxidation or first reduction of each compound. The results of these experiments indicate that reduction of the bispyridine adduct (Cor)Co(III)(py)(2) proceeds via the monopyridine complex (Cor)Co(III)(py) to give in each case the unligated cobalt(II) corrole [(Cor)Co(II)](-). In contrast, pyridine remains coordinated after electrooxidation, and the final product was characterized as [(Cor)Co(III)(py)(2)](+).     

A β-glucosidase from Sclerotinia sclerotiorum

The filamentous fungus Sclerotinia sclerotiorum, grown on a xylose medium, was found to excrete one β-glucosidase (β-glu x). The enzyme was purified to apparent homogeneity by ammonium sulfate precipitation, gel filtration, anion-exchange chromatography, and high-performance liquid chromatography (HPLC) gel filtration chromatography. Its molecular mass was estimated to be 130 kDa by HPLC gel filtration and 60 kDa by sodium dodecyl sulfate polyacrylamide gel electrophoresis, suggesting that β-glu x may be a homodimer. For p-nitrophenyl β-d-glucopyranoside hydrolysis, apparent K _m and V _max values were found to be 0.09 mM and 193 U/mg, respectively, while optimum temperature and pH were 55–60°C and pH 5.0, respectively. β-Glu x was strongly inhibited by Fe²⁺ and activated about 35% by Ca²⁺. β-Glu x possesses strong transglucosylation activity in comparison with commercially available β-glucosidases. The production rate of total glucooligosaccharides (GOSs) from 30% cellobiose at 50°C and pH 5.0 for 6 h with 0.6 U/mL of enzyme preparation was 80 g/L. It reached 105 g/L under the same conditions when using cellobiose at 350 g/L (1.023 M). Finally, GOS structure was determined by mass spectrometry and ¹³C nuclear magnetic resonance spectroscopy.     

Exploring CH-activation pathways in bifunctional zirconocene/borane systems

The dimethylsilanediyl-bridged ansa-zirconocene dichloride 1, that contains a pendent allyl substituent at a Cp-ring, adds HB(C(6)F(5))(2) to the vinyl group to yield the bifunctional zirconocene/borane complex 2. Substituted benzimidazoles were added to the strongly electrophilic borane moiety as protective groups, which allowed subsequent chloride versus -CH(2)SiMe(3) exchange at zirconium to take place by treatment with the respective alkyllithium reagent. Alternatively, the introduction of active sigma-ligands at zirconium is carried out first, followed by the hydroboration reaction. This route was followed for the synthesis of the diphenyl-ansa-zirconocene/borane complex 12. Complex 12 reacts slowly in solution by intramolecular electrophilic attack of the borane at its adjacent Cp-ring, followed by deprotonation using a [Zr]-Ph group to yield the zwitterionic complex 14 featuring a borata-tetrahydroindenyl moiety as part of the ansa-metallocene framework. Complex 14 was characterized by X-ray diffraction. It adds PMe(3) at zirconium to yield 15. Thermolysis of 12 with excess PMe(3) leads to the formation of the (aryne)zirconocene complex 18, which is stabilized by PMe(3) coordination to zirconium and PMe(3) addition to boron. N-Methylbenzimidazole adds to the -B(C(6)F(5))(2) unit of 12 to give the 1:1 adduct 19. Thermolysis of 19 at 80 degrees C in benzene solution in the presence of one additional equivalent of N-methylbenzimidazole results in deprotonation of the substrate to yield the sigma-N-methylbenzimidazolyl zirconium complex 20 (as a mixture of two diastereoisomers). An additional N-methylbenzimidazole ligand is bonded to the B(C(6)F(5))(2) unit in this product.     

"Dimers" and "trimers" of tetrahydroindenes and hexahydroazulenes, respectively generated from [2-(1-cycloalkenyl)ethynyl]carbene complexes (M = W, Cr) by cascade cyclization/cycloaddition reactions

A cascade of cyclization/cycloaddition reactions was triggered by addition of protic oxygen nucleophiles ROH 2 (RO = CH3CO2, PhCO2, PhO) to [2-(1-cyclohexenyl)ethynyl]carbene complexes 1b and 1c (M=W, Cr, respectively), affording highly strained "dimers" 11/11' and "trimers" 12 of the carbene ligand. The first reaction step involved the formation of 1-metalla1,3,5-hexatrienes 7, which readily gave tetrahydroindenes 8 by pi cyclization and extrusion of the metal unit. "Dimers" 11/11' were generated from tetrahydroindenes 8 by a highly exo selective [4+2] cycloaddition of compounds 1b and 1c to afford 1-metalla-1,3,5-hexatriene intermediates 9, and a spontaneous pi cyclization of the latter compounds involving the disengagement of the metal unit. Propenylidene cyclohexenes 13/13' were formed in "ene"-type side reactions to the pi cyclization of 1-metalla-1,3,5-hexatrienes 7, by loss of the metal unit. "Dimers" 11 were transformed into "trimers" 12 by a [4+2] cycloaddition and subsequent pi-cyclization of the resulting 1-metalla-1,3,5-hexatriene system. The course of the reaction was elucidated by means of model reactions with (2-phenylethynyl)carbene complex 14, in which 1-metalla-1,3,5-hexatriene intermediates 16 and 17 were isolated and characterized. Alkynyl benzene derivatives 19 were obtained by an unprecedented ring-expansion of a cyclopentadiene unit of "dimers" 11a and 11c, involving the insertion of a carbene carbon atom of compound 14 into a C=C bond. A reaction cascade leading to "dimers" 24/24' could also be triggered by treatment of compounds 2 with [2-(1-cycloheptenyl)ethynyl]carbene tungsten complex 1d.