Semisynthesis of Functional Glycosylphosphatidylinositol‐Anchored Proteins

Glypiation is a common posttranslational modification of eukaryotic proteins involving the attachment of a glycosylphosphatidylinositol (GPI) glycolipid. GPIs contain a conserved phosphoglycan that is modified in a cell‐ and tissue‐specific manner. GPI complexity suggests roles in biological processes and effects on the attached protein, but the difficulties to get homogeneous material have hindered studies. We disclose a one‐pot intein‐mediated ligation (OPL) to obtain GPI‐anchored proteins. The strategy enables the glypiation of folded and denatured proteins with a natural linkage to the glycolipid. Using the strategy, glypiated eGFP, Thy1, and the Plasmodium berghei protein MSP1₁₉ were prepared. Glypiation did not alter the structure of eGFP and MSP1₁₉ proteins in solution, but it induced a strong pro‐inflammatory response in vitro. The strategy provides access to glypiated proteins to elucidate the activity of this modification and for use as vaccine candidates against parasitic infections.     

Method development and validation for the determination of biogenic amines in soy sauce using supercritical fluid chromatography coupled with single quadrupole mass spectrometry

Biogenic amines have been reported in many foods such as fish, meat, and soy sauce. The consumption of foods containing high concentrations of biogenic amines has been associated with health hazards. In this study, a green and efficient method using supercritical fluid chromatography coupled with single quadrupole mass spectrometry was developed for determination of biogenic amines in soy sauce. The chromatographic and mass spectrometry conditions were systematically optimized in terms of selectivity and peak shape. Nine biogenic amines were well separated within 25 min on a Cosmosil 5HP column using 5% (v/v) water and 0.2% (v/v) ammonia solution in methanol as mobile phase additives at a backpressure of 120 bar and temperature of 40°C. The established method was fully validated regarding the linearity, sensitivity, precision, and accuracy. The limits of detection and limits of quantification ranged from 0.03 to 10.50 μg/mL and 0.10 to 23.1 μg/mL, respectively. The relative standard deviations for intra‐ and interday precisions were all lower than 9.36% and the recoveries ranged from 75.82 to 99.63% and 80.10 to 99.89% for two levels of standards spiked in soy sauce, respectively. Finally, the established method was successfully applied to the quantitative analysis of biogenic amines in soy sauce.     

A computational study of the error in the vortex method associated with discontinuous vorticity

We investigate computationally the error computed by the vortex method for a discontinuous patch of vorticity. Specifically, the computed velocity and vorticity of an elliptical path of constant vorticity, known as the Kirchhoff ellipse, are compared to the analytic velocity and vorticity. The error in the velocity and the vorticity for the Kirchhoff ellipse as computed by the vortex method is presented. This error is studied as a function of the aspect ratio of the ellipse, the blob function, the spacing between the centers of the computational elements, and the blob radius. Both the error at the initial time and the error after three revolutions of the ellipse are discussed. © 1996 John Wiley & Sons, Inc.     

Acetylene-terminated resins: Mechanism of thermal polymerization and properties of cured polymers

The polymerization kinetics and mechanisms of model compounds (mono- and difunctional) characteristic of prepolymers of ATR (acetylene-terminated resins) have been studied by HPLC, FTIR, UV, NMR (liquid and solid) and HPLC in the temperature range of 150–220°C. Using monofunctional compounds, we were able to show that the thermal polymerization of acetylene functions is not a simple reaction. Initially, the majority of compounds formed have a low polymerization degree, followed by the formation of species with higher and progressive polymerization degrees. Spectroscopic techniques such as NMR and FTIR lead to the unambiguous determination of reaction conversion up to 95% in the case of bifunctional prepolymers. The understanding of network structures, on the other hand, is more delicate in polyaromatic systems, since the chains formed are very similar to the basic skeleton of the prepolymer. The kinetic curves obtained isothermally between 150–220°C have shown that while kinetic monitoring of the disappearance of the first 90% of ethynyl functions poses no particular problems, there is a considerable uncertainty for the last 10%, regardless of the technique chosen. We have demonstrated that me thermal properties are dependent on the molecular weight and the structure of the polymer.     

Synthesis of Fibrin-Type I Collagen Biomaterials via an Acidic Gel

Fibrin-Type I collagen composite gels have been widely studied as biomaterials, in which both networks are usually formed simultaneously at a neutral pH. Here, we describe a new protocol in which mixed concentrated solutions of collagen and fibrinogen were first incubated at acidic pH to induce fibrinogen gel formation, followed by a pH change to neutral inducing collagen fiber formation. Thrombin was then added to form fibrin-collagen networks. Using this protocol, mixed gels containing 20 mg.mL⁻¹ fibrin and up to 10 mg.mL⁻¹ collagen could be prepared. Macroscopic observations evidenced that increasing the content of collagen increases the turbidity of the gels and decreases their shrinkage during the fibrinogen-to-fibrin conversion. The presence of collagen had a minor influence on the rheological properties of the gels. Electron microscopy allowed for observation of collagen fibers within the fibrin network. 2D cultures of C2C12 myoblasts on mixed gels revealed that the presence of collagen favors proliferation and local alignment of the cells. However, it interferes with cell differentiation and myotube formation, suggesting that further control of in-gel collagen self-assembly is required to elaborate fully functional biomaterials.     

Gelatin‐Alginate Gels and Their Enzymatic Modifications: Controlling the Delivery of Small Molecules

The release of molecules entrapped within biogels is dictated by diffusion laws. Innovative biogel architectures are conceived and tested to control small molecule delivery from gelatin gels. The ionic interactions modulate the release of small molecules. Alginate is then added to gelatin gels and further hydrolyzed; the influence of viscosity is discussed. Next, various mixed gels are compared, such as a gelatin‐alginate IPN and the original architecture of an alginate gel entrapped in a gelatin gel with or without a polysaccharidase. The relative influence of ionic interactions and diffusional constraints on the delivery of small charged molecules is explored, and a solution for controlling diffusion is proposed for any situation.

     

Triple Self‐Sorting in Constitutional Dynamic Networks: Parallel Generation of Imine‐Based CuI,FeII, and ZnII Complexes

Three imine‐based metal complexes, having no overlap in terms of their compositions, have been simultaneously generated from the self‐sorting of a constitutional dynamic library (CDL) containing three amines, three aldehydes, and three metal salts. The hierarchical ordering of the stability of the three metal complexes assembled and the leveraging of the antagonistic and agonistic relationships existing between the constituents within the constitutional dynamic network corresponding to the CDL were pivotal in achieving the sorting. Examination of the process by NMR spectroscopy showed that the self‐sorting of the Fe^II and Zn^II complexes depended on an interplay between the thermodynamic driving forces and a kinetic trap involved in their assembly. These results also exemplify the concept of “simplexity”—the fact that the output of a self‐assembling system may be simplified by increasing its initial compositional complexity—as the two complexes could self‐sort only in the presence of the third pair of organic components, those of the Cu^I complex.     

Pump−probe experiments at the TEMPO beamline using the low‐α operation mode of Synchrotron SOLEIL

The SOLEIL synchrotron radiation source is regularly operated in special filling modes dedicated to pump–probe experiments. Among others, the low‐α mode operation is characterized by shorter pulse duration and represents the natural bridge between 50 ps synchrotron pulses and femtosecond experiments. Here, the capabilities in low‐α mode of the experimental set‐ups developed at the TEMPO beamline to perform pump–probe experiments with soft X‐rays based on photoelectron or photon detection are presented. A 282 kHz repetition‐rate femtosecond laser is synchronized with the synchrotron radiation time structure to induce fast electronic and/or magnetic excitations. Detection is performed using a two‐dimensional space resolution plus time resolution detector based on microchannel plates equipped with a delay line. Results of time‐resolved photoelectron spectroscopy, circular dichroism and magnetic scattering experiments are reported, and their respective advantages and limitations in the framework of high‐time‐resolution pump–probe experiments compared and discussed.     

Measurement of geometric phase for mixed states using single photon interferometry

Geometric phase may enable inherently fault-tolerant quantum computation. However, due to potential decoherence effects, it is important to understand how such phases arise for mixed input states. We report the first experiment to measure mixed-state geometric phases in optics, using a Mach-Zehnder interferometer, and polarization mixed states that are produced in two different ways: decohering pure states with birefringent elements; and producing a nonmaximally entangled state of two photons and tracing over one of them, a form of remote state preparation.     

High-power laser with Nd:YAG single-crystal fiber grown by the micro-pulling-down technique

We present optical characterization and laser results achieved with single-crystal fibers directly grown by the micro-pulling-down technique. We investigate the spectroscopic and optical quality of the fiber, and we present the first laser results. We achieved a cw laser power of 10 W at 1064 nm for an incident pump power of 60 W at 808 nm and 360 kW peak power for 12 ns pulses at 1 kHz in the Q-switched regime. It is, to the best of our knowledge, the highest laser power ever achieved with directly grown single-crystal fibers.