Sensing and photocatalytic properties of nanosized Cu(I)CN organotin supramolecular coordination polymer based on pyrazine

Orange prismatic crystals of the supramolecular coordination polymer (SCP) _∞³[Cu(CN)₂(Me₃Sn)(Pyz)], SCP 1 , were synthesized using a self‐assembly method under ambient conditions. Nanosized 1 was obtained using the same molar ratio in water by ultrasonic irradiation. SCP 1 was characterized using single‐crystal X‐ray diffraction, elemental analysis, thermal analysis and Fourier transform infrared spectroscopy. SCP 1 and its nanosized 1 particles were also examined using powder X‐ay diffraction and scanning electron microscopy. The luminescence emission of SCP 1 was studied as well as its use as a sensor for the detection of common organic solvents and metal ions. Also, the catalytic activities of nanosized 1 towards various organic dyes were investigated under ambient conditions, UV irradiation and ultrasonic irradiation. Nanosized 1 as a heterogeneous nanoparticle catalyst exhibits high catalytic activity for the degradation of eosin‐Y and acid blue dyes. The mechanism of degradation investigated using various scavenger techniques is proposed and discussed. The catalytic oxidation process is mainly caused by ?OH radicals.     

Determination of phenolic compounds by MALDI–TOF and essential oil composition by GC–MS during three development stages of Origanum majorana L.

This study aimed to investigate the effect of the maturation process of sweet marjoram (Origanum majorana L.) on essential oil composition, the phenolic profile of ethanolic extract and their antioxidant capacities. The essential oil composition was studied at three stages of maturity by GC–MS. Thirty compounds were detected representing 100% of the total essential oil. p‐Menth‐1‐en‐4‐ol was the major compound (37.15–76.94%) followed by cyclohexanol‐3,3,5 trimethyl (5.41–15.99%) and α‐terpineol (0.94–11.34%). During the maturation process, an accumulation of oxygenated monoterpenes was observed. The phenolic composition was studied using matrix‐assisted laser desorption/ionization time of flight. The analysis showed the presence of short flavonoid monomers at all stages of maturation. The antioxidant capacity of ethanolic extracts and essential oils was evaluated using the DPPH assay, iron chelating power and reducing power assay. The highest phenolic content and antioxidant capacity were found at flowering stage. These findings on essential oil composition, phenolic profile and antioxidant capacity of O. majorana at three different stages of development provide more information on how these secondary metabolites are accumulated.     

Synthesis,Characterization and Evaluation of Peptide Nanostructures for Biomedical Applications

There is a challenging need for the development of new alternative nanostructures that can allow the coupling and/or encapsulation of therapeutic/diagnostic molecules while reducing their toxicity and improving their circulation and in-vivo targeting. Among the new materials using natural building blocks, peptides have attracted significant interest because of their simple structure, relative chemical and physical stability, diversity of sequences and forms, their easy functionalization with (bio)molecules and the possibility of synthesizing them in large quantities. A number of them have the ability to self-assemble into nanotubes, -spheres, -vesicles or -rods under mild conditions, which opens up new applications in biology and nanomedicine due to their intrinsic biocompatibility and biodegradability as well as their surface chemical reactivity via amino- and carboxyl groups. In order to obtain nanostructures suitable for biomedical applications, the structure, size, shape and surface chemistry of these nanoplatforms must be optimized. These properties depend directly on the nature and sequence of the amino acids that constitute them. It is therefore essential to control the order in which the amino acids are introduced during the synthesis of short peptide chains and to evaluate their in-vitro and in-vivo physico-chemical properties before testing them for biomedical applications. This review therefore focuses on the synthesis, functionalization and characterization of peptide sequences that can self-assemble to form nanostructures. The synthesis in batch or with new continuous flow and microflow techniques will be described and compared in terms of amino acids sequence, purification processes, functionalization or encapsulation of targeting ligands, imaging probes as well as therapeutic molecules. Their chemical and biological characterization will be presented to evaluate their purity, toxicity, biocompatibility and biodistribution, and some therapeutic properties in vitro and in vivo. Finally, their main applications in the biomedical field will be presented so as to highlight their importance and advantages over classical nanostructures.     

Organopolysiloxanes as Chemically Sensitive Coatings for Optical Fibers

Various types of UV-curable organically modified siloxanes have been synthesized by the sol-gel method with the aim of fabricating chemically sensitive coatings for silica optical fibers. The refractive index of the coating material can be tailored in the range from 1.46 to 1.56 and sensitivity towards CO2 is achieved by incorporation of amino groups. The interaction of the cured layers with CO2 or with hydrocarbons has been studied in immersion experiments. Both the reaction of CO2 with incorporated amino groups and the penetration of hydrocarbons into the layer induce changes of the light absorption coefficient and the refractive index of the coating which are detected by measuring the output light intensity from the fiber.     

An Efficient RuII–RhIII–RuII Polypyridyl Photocatalyst for Visible‐Light‐Driven Hydrogen Production in Aqueous Solution

The development of multicomponent molecular systems for the photocatalytic reduction of water to hydrogen has experienced considerable growth since the end of the 1970s. Recently, with the aim of improving the efficiency of the catalysis, single‐component photocatalysts have been developed in which the photosensitizer is chemically coupled to the hydrogen‐evolving catalyst in the same molecule through a bridging ligand. Until now, none of these photocatalysts has operated efficiently in pure aqueous solution: a highly desirable medium for energy‐conversion applications. Herein, we introduce a new ruthenium–rhodium polypyridyl complex as the first efficient homogeneous photocatalyst for H₂ production in water with turnover numbers of several hundred. This study also demonstrates unambiguously that the catalytic performance of such systems linked through a nonconjugated bridge is significantly improved as compared to that of a mixture of the separate components.     

Thermodynamic Properties of Polymorphs of Fluorosulfate Based Cathode Materials with Exchangeable Potassium Ions

FeSO₄F‐based frameworks have recently emerged as attractive candidates for alkali insertion electrodes. Mainly owing to their rich crystal chemistry, they offer a variety of new host structures with different electrochemical performances and physical properties. In this paper we report the thermodynamic stability of two such K‐based “FeSO₄F” host structures based on direct solution calorimetric measurements. KFeSO₄F has been reported to crystallize in two different polymorphic modifications—monoclinic and orthorhombic. The obtained enthalpies of formation from binary components (KF plus FeSO₄) are negative for both polymorphs, indicating that they are thermodynamically stable at room temperature, which is very promising for the future exploration of sulfate based cathode materials. Our measurements show that the low‐temperature monoclinic polymorph is enthalpically more stable than the orthorhombic phase by ≈10 kJ mol^?1, which is consistent with the preferential formation of monoclinic KFeSO₄F at low temperature. Furthermore, observed phase transformations and difficulties in the synthesis process can be explained based on the obtained calorimetric results. The KMnSO₄F orthorhombic phase is more stable than both polymorphs of KFeSO₄F.     

Furostane‐Type Steroidal Saponins from the Roots of Chlorophytum borivilianum

Four new furostanol steroid saponins, borivilianosides A–D ( 1 – 4 , resp.), corresponding to (3β,5α,22R,25R)‐26‐(β‐D ‐glucopyranosyloxy)‐22‐hydroxyfurostan‐3‐yl O‐β‐D ‐xylopyranosyl‐(1→3)‐O‐β‐D ‐glucopyranosyl‐(1→4)‐O‐[α‐L ‐rhamnopyranosyl‐(1→2)]‐β‐D ‐galactopyranoside ( 1 ), (3β,5α,22R,25R)‐ 26‐(β‐D ‐glucopyranosyloxy)‐22‐methoxyfurostan‐3‐yl O‐β‐D ‐xylopyranosyl‐(1→3)‐O‐β‐D ‐glucopyranosyl‐(1→4)‐O‐[α‐L ‐rhamnopyranosyl‐(1→2)]‐β‐D ‐galactopyranoside ( 2 ), (3β,5α,22R,25R)‐26‐(β‐D ‐glucopyranosyloxy)‐22‐methoxyfurostan‐3‐yl O‐β‐D ‐xylopyranosyl‐(1→3)‐O‐[β‐D ‐glucopyranosyl‐(1→2)]‐O‐β‐D ‐glucopyranosyl‐(1→4)‐β‐D ‐galactopyranoside ( 3 ), and (3β,5α,25R)‐26‐(β‐D ‐glucopyranosyloxy)furost‐20(22)‐en‐3‐yl O‐β‐D ‐xylopyranosyl‐(1→3)‐O‐[β‐D ‐glucopyranosyl‐(1→2)]‐O‐β‐D ‐glucopyranosyl‐(1→4)‐β‐D ‐galactopyranoside ( 4 ), together with the known tribuluside A and (3β,5α,22R,25R)‐26‐(β‐D ‐glucopyranosyloxy)‐22‐methoxyfurostan‐3‐yl O‐β‐D ‐xylopyranosyl‐(1→2)‐O‐[β‐D ‐xylopyranosyl‐(1→3)]‐O‐β‐D ‐glucopyranosyl‐(1→4)‐O‐[α‐L ‐rhamnopyranosyl‐(1→2)]‐β‐D ‐galactopyranoside were isolated from the dried roots of Chlorophytum borivilianum Sant and Fern . Their structures were elucidated by 2D ‐NMR analyses (COSY, TOCSY, NOESY, HSQC, and HMBC) and mass spectrometry.     

Determination of Formation Regions of Titanium Phosphates; Determination of the Crystal Structure ofβ-Titanium Phosphate, Ti(PO4)(H2PO4), from Neutron Powder Data

The formation region of the various types of layered titanium hydrogen phosphate hydrates was investigated. The materials were prepared by hydrothermal methods, treating amorphous titanium phosphate with phosphoric acid (8 to 16M) in the temperature range 175 to 250°C. The materials obtained were:α-Ti(HPO₄)₂·H₂O,γ-Ti(PO₄)(H₂PO₄)·2H₂O, and its anhydrous formβ-Ti(PO₄)(H₂PO₄). The structure ofβ-Ti(PO₄)(H₂PO₄) has been determined by Rietveld powder refinement of high resolution neutron diffraction data. The structure is refined in the monoclinic space groupP2₁/n(No. 14). The unit cell parameters are:a=18.9503(4) Å,b=6.3127(1) Å,c=5.1391(1) Å,β=105.366(2)°;Z=4. The final agreement factors were:R_p=2.9% andR_wp=3.8%. The structure ofβ-Ti(PO₄)(H₂PO₄) is built from TiO₆octahedra linked together by tertiary phosphate (PO₄) and dihydrogen phosphate ((OH)₂PO₂) tetrahedra. The layers are held together by hydrogen bonds.     

Monte Carlo simulations of the hydrophobic effect in aqueous electrolyte solutions

The hydrophobic interaction between two methane molecules in salt-free and high salt-containing aqueous solutions and the structure in such solutions have been investigated using an atomistic model solved by Monte Carlo simulations. Monovalent salt representing NaCl and divalent salt with the same nonelectrostatic properties as the monovalent salt have been used to examine the influence of the valence of the salt species. In salt-free solution the effective interaction between the two methane molecules displayed a global minimum at close contact of the two methane molecules and a solvent-separated secondary minimum. In 3 and 5 M monovalent salt solution the potential of mean force became slightly more attractive, and in a 3 M divalent salt solution the attraction became considerably stronger. The structure of the aqueous solutions was determined by radial distribution functions and angular probability functions. The distortion of the native water structure increased with ion valence. The increase of the hydrophobic attraction was associated with (i) a breakdown of the tetrahedral structure formed by neighboring water molecules and of the hydrogen bonds between them and (i) the concomitant increase of the solution density.     

Electronic and geometric properties of ETS-10: QM/MM studies of cluster models

Hybrid DFT/MM methods have been used to investigate the electronic and geometric properties of the microporous titanosilicate ETS-10. A comparison of finite length and periodic models demonstrates that band gap energies for ETS-10 can be well represented with relatively small cluster models. Optimization of finite clusters leads to different local geometries for bulk and end sites, where the local bulk TiO6 geometry is in good agreement with recent experimental results. Geometry optimizations reveal that any asymmetry within the axial O-Ti-O chain is negligible. The band gap in the optimized model corresponds to a O(2p) --> Tibulk(3d) transition. The results suggest that the three Ti atom, single chain, symmetric, finite cluster is an effective model for the geometric and electronic properties of bulk and end TiO6 groups in ETS-10.