Adsorption of atomic hydrogen at a nanostructured electrode of polyacrylate-capped Pt nanoparticles in polyelectrolyte

Atomic hydrogen electrosorption is reported at crystallite sites of polyacrylate-capped Pt nanoparticles (d = 2.5 +/- 0.6 nm), by assembling nanostructured electrodes of polyacrylate-Pt nanocrystallites layer-by-layer in a cationic polyelectrolyte, poly(diallyldimethylammonium chloride). Cyclic voltammetry in 1 M H2SO4 revealed a strongly adsorbed hydrogen state and a weakly adsorbed hydrogen state assigned to adsorption at (100) and (110) sites of the modified nanocrystallites, respectively. Resolving hydrogen adsorption states signifies that surface capping by the carboxylate groups is not irreversibly blocking hydrogen adsorption sites at the modified Pt nanoparticle surface. Adsorption peak currents increased with increasing the number of layers up to 16 bilayers, indicating the feasibility of nanoparticle charging via interparticle charge hopping and the accessibility of adsorption states within the thickness of the nanoparticle/polyelectrolyte multilayers. Despite similarity in hydrogen adsorption in the cyclic voltammorgrams in 1 M H2SO4, negative shifts in adsorption potentials were measured at the nanocrystallite Pt-polyelectrolyte multilayers relative to a polycrystalline bulk Pt surface. This potential shift is attributed to a kinetic limitation in the reductive hydrogen adsorption as a result of the Pt nanoparticle surface modification and the polyelectrolyte environment.     

Evaluations of solid electrodes for use in voltammetric monitoring of heavy metals in samples from metallurgical nickel industry

Evaluation of different solid electrode systems for detection of zinc, lead, cobalt, and nickel in process water from metallurgical nickel industry with use of differential pulse stripping voltammetry has been performed. Zinc was detected by differential pulse anodic stripping voltammetry (DPASV) on a dental amalgam electrode as intermetallic Ni–Zn compound after dilution in ammonium buffer solution. The intermetallic compound was observed at –375 mV, and a linear response was found in the range 0.2–1.2 mg L^–1 (r²=0.98) for 60 s deposition time. Simultaneous detection of nickel and cobalt in the low g L^–1 range was successfully performed by use of adsorptive cathodic stripping voltammetry (AdCSV) of dimethylglyoxime complexes on a silver–bismuth alloy electrode, and a good correlation was found with corresponding AAS results (r²=0.999 for nickel and 0.965 for cobalt). Analyses of lead in the g L^–1 range in nickel-plating solution were performed with good sensitivity and stability by DPASV, using a working electrode of silver together with a glassy carbon counter electrode in samples diluted 1:3 with distilled water and acidified with H₂SO₄ to pH 2. A new commercial automatic at-line system was tested, and the results were found to be in agreement with an older mercury drop system. The stability of the solid electrode systems was found to be from one to several days without any maintenance needed.     

(Eta5-pentamethylcyclopentadienyl)rhodium and -iridium complexes with weakly and strongly coordinating anions: isolation and first X-ray molecular structures of the tris(solvent) complexes [(C5Me5)M(acetone)2(H2O)][BF4]2 (M = Rh, Ir)

Several novel pentamethylcyclopentadienyl complexes of general formula [(C5Me5)IrL3][BF4]2 were prepared including the tris(solvent) precursors [(C5Me5)M(acetone)2(H2O)][BF4]2 (M = Rh, Ir) (1a,b). The X-ray molecular structures of 1a,b were determined at low temperature. Complexes 1a,b are isostructural, and both compounds crystallize in the monoclinic space group P2(1)/c with a = 10.157(3) A, b = 14.038(9) A, c = 16.335(2) A, beta = 99.73(2) degrees, and Z = 4 for 1a and with a = 10.107(9) A, b = 13.994(16) A, c = 15.996(34) A, beta = 99.61(12) degrees, and Z = 4 for 1b. The coordinated water molecule is hydrogen bonded to both BF4(-) anions. Reaction of 1a,b with pyridine (py) afforded the related tris(pyridine) complexes [(C5Me5)M(eta1-(N)-py)3][BF4]2 (M = Rh, Ir) (2a,b). Complex 2b was characterized by X-ray crystallography, monoclinic space group P2(1)/c with a = 8.665(3) A, b = 19.687(7) A, c = 18.408(5) A, beta = 94.17(3) degrees, and Z = 4. Moreover, we prepared the novel neutral compounds (C5Me5)M(eta2-NO3)(eta1-NO3) (M = Rh, Ir) (4a,b) where the anions are bonded to the metal center instead of a coordinating solvent as confirmed by X-ray study on the iridium complex 4b. The latter crystallizes in the orthorhombic space group Pcab with a = 13.032(4) A, b = 14.370(11) A, c = 14.839(18) A, and Z = 8.     

Topographical properties of polymer films deposited in capillaries for electrophoretic separations of large organic molecules

Topography and thickness of hydrophilic polymer coatings of fused-silica capillaries for capillary electrophoresis (CE) were investigated using atomic force microscopy (AFM), scanning electron microscopy (SEM), and profilometry. Three hydrogels, poly(2-hydroxyethyl methacrylate) [poly(HEMA)], poly(diethylene glycol monomethacrylate) [poly(DEGMA)], and poly(triethylene glycol monomethacrylate) [poly(TEGMA)], were deposited using two procedures, either by simple physical sorption of the polymers, or by derivatization of the capillary wall surface with glycidyl methacrylate (EPMA) followed by polymerization of the appropriate monomers. The performance of the modified capillaries was tested under CE conditions (decrease in the electroosmotic flow, EOF dependence on pH, separation of milk and standard proteins). It has been found that the most important property of the polymer coating is its thickness, whereas its topography and the degree of its hydrophobicity are less significant. Film deposition by physical adsorption is preferable to polymerization on the derivatized surface.     

Development of cross-linked polystyrene-supported chiral amines featuring a fluorinated linker for gel-phase 19F NMR spectrometry monitoring of reactions

Ten cross-linked polystyrene-supported, protected chiral amines featuring both a spacer, comprising from 5 to 15 atoms, and a fluorinated linker have been successfully prepared. The development of the monitoring technique by gel-phase 19F NMR spectrometry on cross-linked polystyrene derivatives proved to be of high value in four steps of the process, as shown by the comparison of data gathered from both a classic NMR spectrometer and elemental analysis. Gel-phase 19F NMR spectrometry, thus, constitutes a useful technique that complements IR and 13C NMR spectrometries for the qualitative monitoring of reactions. In addition, quantitative determination of the conversion in a given transformation is possible, provided that 19F chemical shifts of the substrate and the product be different enough (Deltadelta>base width), as illustrated by the Mitsunobu coupling process (16-->17). The technique is nondestructive, and the samples used to monitor the reactions may be returned to the reaction medium. Deprotection of the above amines was achieved and furnished eight of the final resins in good to acceptable purity for future applications.     

Analyse conformationnelle de derives carbonylés du furanne et du thiophène par utilisation de la position et de l'intensite des bandes infrarouges

The carbonyl bands of 2-formyl and 3-formyl-furans [¹⁸O] are determined and explained. The magnitude of the inductive and mesomeric effects in 2-acyl and 3-acyl-thiophenes and furans is discussed on the basis of a comparison of the frequencies and the intensities of the v(CO) and v(CC) bands. The conformational preference of some aroyl-furans and aroyl-formyl-furans and the rotation around the C(Ar)-C(O) bonds are related to these parameters.     

Helicity‐Encoded Molecular Strands: Efficient Access by the Hydrazone Route and Structural Features

Control over the folding of molecular strands may be achieved by appropriate choice of the constituting subunits, in particular for chains of specific heterocycles such as sequences of directly connected pyridine (py) and pyrimidine (pym) rings, which are known to fold into extended helical structures. Since the hydrazone (hyz) group represents an isomorphic analogue of a py site, the condensation of hydrazine and carboxaldehyde derivatives of pym offers a very efficient approach to strands incorporating hyz instead of py units and constituted by sequences of alternating hyz and pym groups. A series of such strands of different lengths, up to ten hyz units, i.e., 1 – 7 , were synthesized. Their spectral properties indicate that they fold indeed into helical shapes. Extensive characterization was performed in solution by ¹HNMR spectroscopy and in the solid state by determination of the crystal structures of eight such strands. They all display the expected helical geometry with up to 3 ¹/₃ turns and direct stacking contacts. The efficiency and flexibility of the synthetic approach as well as its wide potential for generation of diversity through lateral decoration make the (hyz? pym) subunit a particularly attractive helicity codon.     

A β-glucosidase from Sclerotinia sclerotiorum

The filamentous fungus Sclerotinia sclerotiorum, grown on a xylose medium, was found to excrete one β-glucosidase (β-glu x). The enzyme was purified to apparent homogeneity by ammonium sulfate precipitation, gel filtration, anion-exchange chromatography, and high-performance liquid chromatography (HPLC) gel filtration chromatography. Its molecular mass was estimated to be 130 kDa by HPLC gel filtration and 60 kDa by sodium dodecyl sulfate polyacrylamide gel electrophoresis, suggesting that β-glu x may be a homodimer. For p-nitrophenyl β-d-glucopyranoside hydrolysis, apparent K _m and V _max values were found to be 0.09 mM and 193 U/mg, respectively, while optimum temperature and pH were 55–60°C and pH 5.0, respectively. β-Glu x was strongly inhibited by Fe²⁺ and activated about 35% by Ca²⁺. β-Glu x possesses strong transglucosylation activity in comparison with commercially available β-glucosidases. The production rate of total glucooligosaccharides (GOSs) from 30% cellobiose at 50°C and pH 5.0 for 6 h with 0.6 U/mL of enzyme preparation was 80 g/L. It reached 105 g/L under the same conditions when using cellobiose at 350 g/L (1.023 M). Finally, GOS structure was determined by mass spectrometry and ¹³C nuclear magnetic resonance spectroscopy.