Visualizing the crystal structure and locating the catalytic activity of micro- and mesoporous ZSM-5 zeolite crystals by using in situ optical and fluorescence microscopy

A combination of optical and fluorescence microscopy was used to study the morphology of micro‐ and mesoporous H‐ZSM‐5 zeolite crystals (17×4×4 μm) and to evaluate, in a spatially resolved manner, the effect of mesoporosity, introduced via desilication, on catalytic performance. For this purpose, the oligomerization of various styrene molecules was used as a model reaction, in which the carbocation intermediates formed in the zeolite pores act as reporter molecules. In situ confocal fluorescence measurements after the template removal process showed that the crystals generally consist of three different subunits that have pyramidal boundaries with each other. Examination of these crystals during styrene oligomerization revealed differences in the catalytic activity between the purely microporous and the combined micro‐ and mesoporous crystals. The introduction of intracrystalline mesoporosity limits the formation to dimeric carbocation intermediates and facilitates the transport of styrene molecules inside the zeolite volume. This leads to a more uniform coloration and fluorescence pattern of the crystals. Moreover, the oligomerization of various styrene compounds, which differ in their reactivity, provides a good way of estimating the Brønsted acid strength in a spatially resolved manner, showing a nonhomogeneously distributed Brønsted acidity over the volume of the crystals. More detailed information on the structure of the ZSM‐5 crystals was revealed for mesoporous crystals during the oligomerization of 4‐methoxystyrene. This reaction induced an “explosion” of the crystal leading to the formation of a complex system with at least eight different subunits. Finally, polarized‐light microscopy was used to unravel the pore geometry in these individual building blocks. The observed differences in catalytic behavior between micro‐ and mesoporous ZSM‐5 crystals are strengthened by the microspectroscopic techniques employed, which show that upon desilication the crystal morphology is affected, the product distribution is changed towards less conjugated carbocation intermediates, and that a gradient in Brønsted acid strength appears to be present.     

Experimental and numerical study of the rotation and the erosion of fillers suspended in viscoelastic fluids under simple shear flow

When a porous agglomerate immersed in a fluid is submitted to a shear flow, hydrodynamic stresses acting on its surface may cause a size reduction if they exceed the cohesive stress of the agglomerate. The aggregates forming the agglomerate are slowly removed from the agglomerate surface. Such a behaviour is known when the suspending fluid is Newtonian but unknown if the fluid is viscoelastic. By using rheo-optical tools, model fluids, carbon black agglomerates and particles of various shapes, we found that the particles had a rotational motion around the vorticity axis with a period which is independent on shape (flat particles not considered), but which is exponentially increasing with the elasticity of the medium expressed by the Weissenberg number (We). Spherical particles are always rotating for We up to 2.6 (largest investigated We in this study) but elongated particles stop rotating for We>0.9 while orienting along the flow direction. Erosion is strongly reduced by elasticity. Since finite element numerical simulation shows that elasticity increases the local stress around a particle, the origin of the erosion reduction is interpreted as an increase of cohesiveness of the porous agglomerate due to the infiltration of a viscoelastic fluid.     

Impurities in a biased graphene bilayer

We study the problem of impurities and midgap states in a biased graphene bilayer. We show that the properties of the bound states, such as localization lengths and binding energies, can be controlled externally by an electric field effect. Moreover, the band gap is renormalized and impurity bands are created at finite impurity concentrations. Using the coherent potential approximation, we calculate the electronic density of states and its dependence on the applied bias voltage.     

The effect of contact angle hysteresis on droplet coalescence and mixing

In this work, droplet coalescence and the subsequent mixing in superhydrophobic surfaces is studied over a range of impact velocities and impact angles. Sanded Teflon surfaces are used as a novel two-dimensional microfluidics platform. These superhydrophobic surfaces exhibit a constant advancing contact angle of θ(A)=150° over a broad range of contact angle hysteresis. As a result, the effect of contact angle hysteresis on droplet coalescence and mixing can be studied. Based on the observed characteristics of coalescence, three different regimes of coalescence are identified as a function of both Weber number and impact angle. These regimes include oscillation dominated, rotation dominated, and mixed dynamics. It is shown that within Weber number ranges achievable in this experiment, hysteresis greatly reduces the deformation of the droplet coalescence process and the subsequent mixing. In head-on collisions, higher hysteresis is found to decrease the frequency at which the resulting dr oscillates. In the case of glancing collisions, where the resulting droplet is found to rotate, higher hysteresis increases the rate of rotation although the overall angular momentum is found to be independent of contact angle hysteresis.     

Evaluation of chlorine containing cellulose-based chiral stationary phases for the LC enantioseparation of basic pharmaceuticals using polar non-aqueous mobile phases

The discrimination ability of three cellulose-based chiral stationary phases (CSPs) was evaluated towards the enantiomers of basic drugs, using ACN as the main solvent in polar organic mobile phases. The study was focused on CSPs containing cellulose tris(3-chloro-4-methylphenylcarbamate) (3-Cl-4-MePC), cellulose tris(4-chloro-3-methylphenylcarbamate) (4-Cl-3-MePC) or cellulose tris(3,5-dichlorophenylcarbamate) (3,5-diClPC) as the chiral selector. The behaviour of these CSPs was studied systematically in order to investigate the influence of the presence and position of the chlorine substituents on the phenylcarbamate moieties on the retention and resolution of the enantiomers. The evaluation was made with three different generic mobile phases, namely ACN/0.1%DEA/0.1% TFA (DEA, diethylamine), ACN/0.1%DEA/0.2% FA and ACN/0.1%DEA/0.2%AcA, deduced from the previous study. The nature of the acidic additive and of the chiral selector was found to be particularly important for the retention and enantioresolution of these basic compounds. High-resolution values could be obtained for most studied enantiomers with these CSPs, clearly demonstrating the interest of using them in combination with polar organic mobile phases. However, significant differences in enantioresolution between the CSPs have been observed for many compounds, indicating that these phases seem to be quite complementary.     

Eine indirekte spektralphotometrische Bestimmung von Vitamin B12

Ohne Zusammenfassung     

Determination of dissociation constants by competitive binding in partial filling capillary electrophoresis

The determination of dissociation constands (K(d)) by competitive ligand binding in partial filling capillary electrophoresis is demonstrated. Two different strategies were applied, one of which only uses a single reporter ligand and a more elaborated one which suppresses systemic disturbances by using a racemic mixture as reporter. The dissociation constants obtained by both alternatives were virtually identical and in good agreement with those previously reported.     

Water dissociation on Ru(001): an activated process

It is shown using x-ray photoelectron spectroscopy that water is adsorbed either nondissociatively or partially dissociatively on Ru(001) under ultrahigh vacuum conditions. We found an activated dissociation process with a barrier slightly larger than that of desorption. A difference in dissociation barriers is found between H2O and D2O that explains the anomalous isotope effects in the thermal desorption. Previous theoretical and experimental disagreements can be rationalized based on electron or x-ray beam-induced dissociation of the water overlayer and an earlier underestimation of the dissociation barrier.     

Electrophysiological evidence for an early processing of human voices

Background  

Previous electrophysiological studies have identified a "voice specific response" (VSR) peaking around 320 ms after stimulus onset, a latency markedly longer than the 70 ms needed to discriminate living from non-living sound sources and the 150 ms to 200 ms needed for the processing of voice paralinguistic qualities. In the present study, we investigated whether an early electrophysiological difference between voice and non-voice stimuli could be observed.