Staudinger ligation: a peptide from a thioester and azide

[reaction: see text] The technique of native chemical ligation enables the total chemical synthesis of proteins. This method is limited, however, by an absolute requirement for a cysteine residue at the ligation juncture. Here, this restriction is overcome with a new chemical ligation method in which a phosphinobenzenethiol is used to link a thioester and azide. The product is an amide with no residual atoms.     

Charged-particle multiplicity distribution in 100-GeV/c \bar pd and π− interactions

We present data on \(\bar pn\) and π^? n collisions obtained from an exposure of the 30′' FNAL deuterium filled bubble chamber to a mixed \({{\bar p} \mathord{\left/ {\vphantom {{\bar p} {\pi ^ - }}} \right. \kern-0em} {\pi ^ - }}\) beam with a momentum of 100 GeV/c. We find that in 17±2% of the collisions with the antiproton there is an interaction on the spectator while for the collisions with π^? mesons the corresponding number is 15±2%. The \(\bar pn\) and π^? n multiplicity distributions have average charged multiplicities of 6.46±0.07 and 6.53±0.08 respectively. The average multiplicities for both types of interactions are slightly smaller than those for the corresponding reactions on hydrogen by an amount that is the same as observed at other energies. As an estimate of \(\bar pn\) annihilation we have calculated the difference \(\sigma _n (\bar pn) - \sigma _n (pn)\) for each prong numbern. We find an average multiplicity of 9±1, a value close to that for \(\bar pp\) annihilation at the same energy. combining our data with lower energy \(\bar pn\) annihilation data, we observe that the average negative multiplicity is systematically larger than that for \(\bar pp\) annihilation similar to the difference between neutron and proton target data with other beam projectiles.     

Selective determination of organophosphate flame retardants and plasticizers in indoor air by gas chromatography, positive-ion chemical ionization and collision-induced dissociation mass spectrometry

Gas chromatography/ion trap mass spectrometry with in-source ionization and dissociation was used in positive-ion chemical ionization (PICI) mode for the determination of organophosphate triesters in indoor air. These compounds are widely used as additive flame retardants and plasticizers in different types of materials and have become ubiquitous pollutants in indoor environments. When using collision-induced dissociation in PICI mode the fragmentation of the organophosphate triesters can be performed in a more controllable way than in electron ionization (EI) mode. The developed selected-reaction monitoring method provided high selectivity for the investigated compounds. For 8-h air measurements (corresponding to 1.5 m3 of sampled air) the limit of detection of the method was determined to be in the range 0.1-1.4 ng m(-3), which is comparable with nitrogen-phosphorus detection and about 50-fold lower than when using EI in selected-ion monitoring mode. The presented method was applied to samples from three common indoor environments, in which a number of organophosphate triesters were identified and quantified. The dominating compound was found to be tris(2-chloropropyl) phosphate, which occurred at levels up to 0.8 microg m(-3).     

Reaktive E = C(p-p)π-Systeme. XLII [1]. Neue Koordinationsverbindungen des 2-(Diisopropylamino)-1-phosphaethins: [{η4-(iPr2NCP)2}Ni{η2-(iPr2NCP)}], [(Ph3P)2Pt{η2-(iPr2NCP)}] und [Co2(CO)6{η2-η2-(iPr2NCP)}]

Reactive E = C(pp)π-Systems. XLII [1]. Novel Coordination Compounds of 2-(Diisopropylamino)-1-phosphaethyne: [{η⁴-(iPr₂NCP)₂}Ni{η²-(iPr₂NCP)}], [(Ph₃P)₂Pt{η²-(iPr₂NCP)}], and [Co₂(CO)₆{η²-μ²-(iPr₂NCP)}] 2-(Diisopropylamino)-phosphaethyne iPr₂N? C?P ( 2 ) reacts with the Ni(0)-complexes [Ni(1,5-cyclooctadiene)₂] and [Ni(CO)₃(1-azabicyclo[2.2.2]octane)], respectively, to give the novel complex [{η⁴-(iPr₂NCP)₂}Ni{η²-(iPr₂NCP)}] ( 5 ), with the 1,3-diphosphacyclobutadiene derivative and 2 (side-on) as π-ligands. The molecular structure of 5 determined by X-ray diffraction on single crystals proves the spin systems and rotational barriers deduced from NMR-data (¹H, ¹³C-, ³¹P). The PC distances of the four-membered ring of 1.817(2) and 1.818(2) Å – as expected – are considerably longer than the PC bond of the η²-coordinated phosphaalkyne 2 [1.671(2) Å]. – In the reactions of 2 with [(Ph₃P)₂Pt(C₂H₄)] or [Co₂(CO)₈] the ligand properties of 2 resemble those of alkynes affording the complexes [(Ph₃P)₂Pt{η²-(iPr₂NCP)}] ( 7 ) with side-on coordinated 2 and [Co₂(CO)₆{η²-μ²-(iPr₂NCP)}] with 2 acting as a 4e donor bridge in quantitative yield. In attempts to prepare copper(I) complexes of the aminophosphaalkyne 2 by reaction with CuCl or CuI the only isolable product formed in reasonable amounts under the influence of air and moisture is the 1 λ³, 3 λ⁵-diphosphetene (iPr₂N) ( 10 ) (isolated yield: ca. 20%). The crystal structure analysis of 10 indicates a strong structural relationship to the diamino-2-phosphaallyl cation [Me(iPr₂N)]⁺ ( 12 ), the 1,3-diphosphacyclobutadiene ligand (iPr₂NCP)₂ in the binuclear complex [{η¹, μ²-(iPr₂NCP)₂}Ni₂(CO)₆] ( 3a ) as well as to the heterocycles (dme)₂LiOE₂′ (E′ = S, 11a ; E′ = Se, 11b ) prepared by Becker et al. [11b, 35].     

Determination of airborne isocyanates as di-n-butylamine derivatives using liquid chromatography and tandem mass spectrometry

A method for the determination of isocyanates as di-n-butyl amine (DBA) derivatives using tandem mass spectrometry (MS/MS) and electrospray ionisation (ESI) is presented. Multiple-reaction monitoring (MRM) of the protonated molecular ions and corresponding deuterium-labelled d₉-DBA derivatives resulted in selective quantifications with correlation coefficients >0.998 for the DBA derivatives of isocyanic acid (ICA), methyl isocyanate (MIC), ethyl isocyanate (EIC), propyl isocyanate (PIC), phenyl isocyanate (PhI), 1,6-hexamethylene diisocyanate (HDI), 2,4-, 2,6-toluene diisocyanate (TDI), isophorone diisocyanate (IPDI), 4,4′-methylenediphenyl diisocyanate (MDI), 3-ring MDI, 4-ring MDI, HDI-isocyanurate, HDI-diisocyanurate, HDI-biuret and HDI-dibiuret. The instrumental precision for 10 repeated injections of a solution containing 0.1 μg ml⁻¹ of the studied derivatives was <2%. Performing MRM of the product ion [DBA + H]⁺ (m/z = 130) from the protonated molecular ion resulted in the lowest detection limits, down to 10 amol (for TDI). Quantification of concentrations below 10⁻⁶ of the occupational exposure limit (OEL) for TDI during 10 min of air sampling was made possible. In an effort to control the formation of alkali adducts, addition of lithium acetate to the mobile phase and monitoring of lithium adducts was evaluated. Having lithium present in the mobile phase resulted in complete domination of [M + Li]⁺ adducts, but detection limits for the studied compounds were not improved. Different deuterium-labelled derivatives as internal standards were evaluated. (1) DBA derivatives of deuterium-labelled isocyanates (d₄-HDI, d₃-2,4-TDI, d₃-2,6-TDI and d₂-MDI), (2) d₉-DBA derivatives of the corresponding isocyanates and (3) d₁₈-DBA derivatives of the corresponding isocyanates. An increase in number of deuterium in the molecule of the internal standard resulted in an increase in instrumental precision and a decrease in correlation within calibration series.     

Explorative data analysis of two-dimensional electrophoresis gels

Methods for classification of two-dimensional (2-DE) electrophoresis gels based on multivariate data analysis are demonstrated. Two-dimensional gels of ten wheat varieties are analyzed and it is demonstrated how to classify the wheat varieties in two qualities and a method for initial screening of gels is presented. First, an approach is demonstrated in which no prior knowledge of the separated proteins is used. Alignment of the gels followed by a simple transformation of data makes it possible to analyze the gels in an automated explorative manner by principal component analysis, to determine if the gels should be further analyzed. A more detailed approach is done by analyzing spot volume lists by principal components analysis and partial least square regression. The use of spot volume data offers a mean to investigate the spot pattern and link the classified protein patterns to distinct spots on the gels for further investigation. The explorative approach in analysis of 2-D gels makes it possible, in a fast and convenient way, to screen many gels in order to determine the protein patterns that form clusters and could be selected for further examination.     

The coordination chemistry of copper(I) in liquid ammonia, trialkyl and triphenyl phosphite, and tri-n-butylphosphine solution

The coordination chemistry of the solvate complexes of the relatively soft electron-pair acceptor copper(I) has been studied in solution and solid state in seven solvents with strong electron-pair donor properties, liquid ammonia, trimethyl, triethyl, triisopropyl, tri-n-butyl and triphenyl phosphite, and tri-n-butylphosphine. The solvate complexes have been characterised by means of EXAFS and 63Cu NMR spectroscopy, and in some cases also by 65Cu NMR spectroscopy. The copper(I) ion is three-coordinated, most probably in a coplanar trigonal fashion, in liquid ammonia with a mean Cu-N bond distance of 2.00(1) Angstroms. No 63Cu NMR signal has been detected from the ammonia solvated copper(I) ion in liquid ammonia, which supports a three-coordination. The phosphite and phosphine solvated copper(I) ions are tetrahedral with Cu-P bond distances in the range 2.24-2.28 Angstrom in both solution and solid state as determined by EXAFS spectroscopy. The tetrahedral configuration of these complexes has been confirmed by 63Cu and 65Cu NMR spectroscopy through the J(63Cu-31P) and J(65Cu-31P) couplings. The fact that two of the investigated complexes, [Cu(P(OC6H5)3)4]+ and [Cu(P(C4H9)3)4]+, are 63Cu and 65Cu NMR silent is probably caused by a significantly angular distorted tetrahedral configuration.     

A general method for coulometric titration of alkylphenols with bromine

A general method for coulometric titration of alkylphenols with anodically generated bromine is described. The reaction is carried out in a water-acetic acid medium and the reactivity is governed by varying the water content and the concentration of bromide ion and by the addition of pyridine. In that way all types of alkylphenols can be titrated quantitatively. For phenols containing more than one free ortho and para position, the titration can also be carried out either to the monobromination stage or to the full bromination stage. The mean relative error is ± 1·2% for monobromination and ±1·5% for full bromination. A method for rapid determination of the number of free ortho and para positions in alkylphenols by using two coulometric titrations is also described.     

Towards molecular-imprint based SPE of local anaesthetics

Summary Solidago canadensis L., Canadian goldenrod (Asteraceae) has been used in European phytotheraphy for centuries as a component of urological and antiphlogistical remedies. High-performance liquid chromatography (HPLC) coupled with diode-array detection (DAD) and online mass spectrometry (MS) has been used for the separation and quantification of phenolics (chlorogenic acid, caffeic acid, kaempferol-3-O-α-L-rutinoside (nicotiflorin), quercetin-3-O-β-D-rutinoside (rutin), quercetin-3-O-β-D-galactoside (hyperoside), quercetin-3-O-β-D-glucoside (isoquercitrin), quercetin-3-O-β-D-rhamnoside (quercitrin), kaempferol-3-O-α-L-rhamnoside (afzelin) and quercetin from Solidaginis herba. Extracts have been obtained using different technologies. Three aqueous and three alcoholic extracts were studied separately. Reversedphase high-performance liquid chromatography separation of polyphenols on octadecyl sorbent Hypersil was performed, using acetonitrile: acetic acid 2.5 v/v % as eluent in gradient elution. Our results confirm previous reports concerning the presence of several flavonoids. Quantification of the main quercetin glycosides in pharmaceuticals is also reported. Presented at Balaton Symposium '01 on High-Performance Separation Methods, Siófok, Hungary, September 2–4, 2001     

In-capillary micro solid-phase extraction and capillary electrophoresis separation of heterocyclic aromatic amines with nanospray mass spectrometric detection

A miniaturised technique to analyse and detect heterocyclic aromatic amines (HAs) using micro solid-phase extraction (SPE) coupled on-line (in-capillary) to capillary electrophoresis (CE) separation with nanospray (nESI) mass spectrometry (MS) detection has been developed. HAs are mutagenic and carcinogenic compounds formed at low levels in protein-rich food during cooking. Due to the low concentrations of HAs and the high complexity of the matrix in which they exist, sensitive and selective analytical methods are required for quantification. SPE was performed on a packed bed of C₁₈ particles inside the CE capillary, which minimised the dead volume. The on-line coupling of SPE, CE and nESI-MS reduced the time for extraction and identification to less than half an hour, which will allow for screening of several samples per day. The new technique provides short analysis time, low sample and solvent consumption, and HAs in standard solutions were easily detected at 12–17 fmol injections, and in spiked urine samples at 750–810 fmol injections.