Identification of a chemical indicator of the rupture of 1,4-β-glycosidic bonds of cellulose in an oil-impregnated insulating paper system

In this study, headspace gas chromatography/mass spectrometry has been used to assess the volatile by-products generated by the ageing of oil-impregnated paper insulation of power transformers. Sealed-glass ampoules were used to age under oxidative conditions 0.5-g specimens of insulating paper in 9 mL of inhibited mineral oil in a temperature range of 60–120 °C and moisture of 0.5, 1 and 2% (w/w). A linear relationship between one of the oil-soluble degradation by-products, i.e. methanol, and the number of ruptured 1,4-β-glycosidic bonds of cellulose, regardless of the type of paper (ordinary Kraft or thermally-upgraded (TU) Kraft paper), was established for the first time in this field. Ageing at 130 °C of model compounds of the Kraft paper constituents (α-cellulose, hemicellulose and lignin) and two cellulosic breakdown by-products (D-(+)-glucose and 1,6-anhydro-β-d-glucopyranose) confirmed that the α-cellulose degradation was mostly responsible for the presence of this molecule in the system. Furthermore, additional 130 °C-tests with six different papers and pressboard samples under a tight control of initial moisture indicated that at least one molecule of methanol is formed for each rupture of 1,4-β-glucosidic bond of the molecular chains. Stability tests showed that the ageing indicator is stable under the oxygen and temperature conditions of open-breathing transformers. The presence of methanol was detected in 94% of oil samples collected from over than 900 in-service pieces of equipment, confirming the potential for this application. Lastly, the tests have shown that oil-oxidation by-products and TU-nitrogenous agents modify the methanol partitioning coefficients in the paper/oil/air system, which makes their study essential over a range of field conditions encountered by power transformers. Results are presented and discussed in comparison with 2-furfuraldehyde, which is the current reference in the domain.     

Investigation of the formation process of MCs+-molecular ions during sputtering

In secondary ion mass spectrometry, the detection of MCs+ clusters (with M an element of the specimen) under a Cs bombardment is frequently used for the quantification of major elements. Despite some very good results obtained by this method, some problems still remain. In order to gain some more insight into these problems, the formation mechanism of the MCs+ clusters is investigated using a Monte Carlo model. It is shown that the majority of the constituent particles of the formed clusters are initially first or second neighbor atoms at the surface and that the velocity distribution of the MCs+ clusters becomes broader and peaked at higher velocities with increasing surface binding energy of the M atom. In addition, it is demonstrated that the interaction potential between the M and Cs+ particle has no influence on the velocity distribution of the MCs+ clusters. On the other hand, the cluster formation probability, defined as the probability that a sputtered M and Cs+ particle will form a MCs+ cluster, is extremely sensitive to this interaction potential. It is also shown that the cluster formation probability decreases with increasing surface binding energy. Finally, a good correspondence is obtained between the calculated and experimental velocity distributions of MCs+ clusters sputtered from different monoatomic materials. As a consequence, the Monte Carlo model and the discussed results can be validated.     

Selective separations by reactive ion exchange: Part 4. Preconcentration of cadmium and zinc by in situ precipitation as hexacyanoferrate(II) salts on gel and macroporous ion-exchange resins

The in situ precipitation of traces of cadmium(II) and zinc(II) ions as hexacyanoferrates from aqueous matrices was studied on conventional polystyrene gel and macroporous cation- and anion-exchange resins. Coprecipitation with each other or with copper(II) ions present in binary cation resins or in solution, and the influence of added nonprecipitating ions of the same charge type such as magnesium(II) were investigated. Microporous (gel) cation exchangers gave reasonable recoveries and macroporous cation exchangers gave very good recoveries; but macroporous anion exchangers performed best, suggesting macroporous hexacyanoferrate(II) resin as an ideal phase for collection/preconcentration of traces of Cu²⁺, Cd²⁺, Zn²⁺, and possibly Co²⁺, Ni²⁺, and Pb²⁺ from waters. As expected, very low yields were obtained with conventional anion exchange resin in the hexacyanoferrate form. Uniform distribution of Cu²⁺, Zn²⁺, and Cd²⁺ over macroporous anion-exchange resin phases were established by means of electron probe scans and taken as evidence for the formation of a uniform, well-developed precipitate layer covering the entire resin particle surface.     

Translational-energy spectroscopy of NO+ and NO2+

High-resolution translational-energy spectroscopy (up to 0.1 eV) has been carried out on 8

V beams of NO^? and NO^2?. Several features in the spectrum of NO⁴ are assigned to the transitions within the triplet manifold of this ion. The observed transitions originate in several excited electronic states, indicating long lifetimes (> 10 μs) for the states involved. Two electronic transitions in NO²' have been observed at low energies which are attributed to excitations to the first two excited states of this ion.     

Chain and Ring Phosphorus Compounds—Analogies between Phosphorus and Carbon Chemistry

Up to about 15 years ago compounds with a skeleton of phosphorus chains or rings were regarded as “exotic” in the field of nonmetal chemistry. Aside from a number of examples of molecules with two P atoms directly bonded to each other and a few sporadically discovered monocyclic ring compounds, only solids of undefined composition and structure were known. Since then the state of our knowledge in this sector has made considerable progress: between PH₃ and its derivatives on the one hand, and the high-molecular modifications of elementary phosphorus on the other, an unexpected variety of well defined compounds have been discovered, showing many similarities to the analogous compounds of carbon. However, surprises can still occur even with “small” phosphorus-containing molecules, as shown by the likewise recently discovered field of phosphorus three-membered ring compounds.     

Synthese de composes dihydro-2,3 furanniques par hydroboration d'alcools β-acetyleniques

Hydroboration of β-acetylenic alcohols followed by NaOH/H₂O₂ oxidation leads to hemiacetals of γ-aldols which are easily dehydrated to 2,3-dihydrofuran compounds. The reaction gives good yields with hindered alcohols and its stereochemistry may be controlled during the organometallic synthesis of the starting alcohol.     

光解碎片平动谱中二级过程的运动学及化学动力学

本文发展了一套分析处理分子束光解反应实验中二级分解产物飞行谱的方法, 它改进了Kroger和Riley的最初讨论。本文表明许多重要的信息都可以从高度平均的实验数据中得出。这包括二级分解产物的平均平动能分布、空间各向异性参数、平行竞争通道间的反应比。模拟的结果可以表现二级分解反应的一些主要特征。     

Synthesis and photochemistry of side-chain liquid crystal polymers based on cinnamate esters

The syntheses of three methacrylate monomers with cinnamate ester side-chains and of a further monomer with a corresponding cinnamide side-chain are described. Two of the monomers, with isomeric structures, were thermotropic liquid crystals. Although the clearing points were very similar the crystal melting points differed by 8°C. One compound also exhibited a monotropic smectic phase, behavior not shown by its isomer. The other two monomers were not liquid crystalline. The monomers were polymerized by free radical polymerization, both as homopolymers and as copolymers with methyl methacrylate. In the case of one of the mesogenic ester monomers, copolymers with a cyanophenyl benzoate monomer were also prepared. Three of the four monomers formed thermotropic liquid crystalline homopolymers and the copolymers with the benzoate monomer were also liquid crystalline. The monomers were considered as photoactive components of polymeric liquid crystals. As a preliminary investigation of their photochemistry, copolymers with methyl methacrylate were prepared and irradiated in solution with a broad-band source. Under these conditions two of the materials show a facile photo-Fries rearrangement of the aryl cinnamate ester group. © 1992 John Wiley & Sons, Inc.     

Pharmacologically interesting compounds—I: High resolution mass spectra of phenothiazines

The mass spectra of twenty-six commercially available medicinal phenothiazines have been determined at high resolution. In each compound, the side chain attached to the 10-position of the phenothiazine ring contains nitrogen and fission of the C? C bond α to this nitrogen gives in most cases the base peak. Some of the compounds are also substituted at the 2-position and this substituent generally remains intact, though some substituents such as acetyl, propionyl, methoxyl and methylthio can undergo fragmentation. Fragmentations fall into three groups; those which give ions representing a part of the side chain; those which give ions representing the intact phenothiazine ring with part of the side chain attached; those which give ions representing a partially fragmented ring system.