Coupling of ultrasonic nebulization to flame furnace atomic absorption spectrometry—new possibilities for trace element determination

The use of ultrasonic nebulization (USN) with desolvation system for sample introduction in flame atomic absorption spectrometry (F AAS) and flame furnace atomic absorption spectrometry (FF AAS) with a nickel tube is described. Polytetrafluorethylene (PTFE) adaptors were built to replace the pneumatic nebulizer for USN-F AAS measurements. For USN-FF AAS analysis, an alumina injector allowed the direct introduction of the dry aerosol into the nickel tube. The analytical performance of both systems is shown for Ag, Bi, Cd, Cr, Cu, Mn, Pb, Sb, Se, Tl and Zn. The results demonstrate that a sensitivity gain of up to 39 times can be achieved using USN-FF AAS, mainly due to the increase in residence time and to the absence of dilution of the analyte by the flame gases, as the atomization takes place inside the nickel tube. However, elements that require higher atomization temperatures, such as Cr and Mn, are more efficiently determined using USN-F AAS. To evaluate the accuracy of the proposed methods for the determination of trace elements, five certified reference samples were analyzed, and good agreement was, in general, achieved between certified and determined values at a 95% confidence level. The relative standard deviation was frequently below 5%, demonstrating good precision, particularly for USN-FF AAS. In this sense, coupling of USN with F AAS and especially with FF AAS has proved to be simple, safe, with high precision and good accuracy, also maintaining some of the most important features of F AAS, such as the high analytical frequency and the low running cost.     

<Emphasis Type="Italic">L</Emphasis>-Carnitine,Immunomodulation, and Human Immunodeficiency Virus (HIV)-related Disorders

Summary. The use of pharmacologic doses of the conditionally-essential nutrient L-carnitine (LC) has been associated with positive effects on the immune system. We have recently suggested that this property of LC could be mediated through activation of the glucocorticoid receptor alpha. Human immunodeficiency virus (HIV)-infected individuals, especially those on antiretroviral therapy, may become LC-deficient. This evidence, together with the immunomodulatory properties of LC, its known major role in lipid and energy metabolisms, and its proposed antiapoptotic and neuroprotective actions, have encouraged the use of LC supplementation as a potential treatment for HIV-related disorders, such as lipodystrophy and peripheral neuropathy. Preliminary results, mostly from small-scale uncontrolled studies are conflicting, whilst larger controlled trials are warranted.     

Changing mechanisms in the beta-cyclodextrin-mediated hydrolysis of phenyl esters of perfluoroalkanoic acids

The rate of hydrolysis of esters CF(3)(CF(2))(n)COOPh (1 (n = 1), 2 (n = 2), and 3 (n = 6)) was measured at pH 6.00 and at pH higher than 9.00 in the presence of beta-cyclodextrin (beta-CD). For compounds 1 and 2 the reaction rate decreases as the beta-CD concentration increases, and they show saturation effects at all pH. It is suggested that the substrate forms an inclusion complex with cyclodextrin. Analysis of the rate data allows calculation of the association equilibrium constant, K(CD), the rate constant for the reaction of the included compound, k(c), and K(TS) which is the hypothetical association equilibrium constant for the transition state of the cyclodextrin-mediated reaction. The dependence of log K(CD) and log K(TS) with the number of atoms in the chain is different. We suggest that the reactions of 1 and 2 take place with the perfluorinated alkyl chain included in the cavity, whereas the transition state for the reaction of phenyl trifluoroacetate involves a complex with the aryl ring inside the cavity. At low pH the inhibition comes from the protection of the carbonyl group toward nucleophilic attack by water. In basic pH the reaction of HO(-) as an external nucleophile is also inhibited. The cyclodextrin-mediated reaction involves the ionized OH group at the rim of the cyclodextrin cavity with poor efficiency due to an unfavorable orientation of the substrate in the complex. On the other hand, the reaction of compound 3 is strongly accelerated by cyclodextrin because the association of the substrate with cyclodextrin competes with the monomer-aggregate equilibrium and at high enough cyclodextrin concentration the main species present in solution is the complex between 3 and cyclodextrin.     

Nanomotors

This minireview discusses whether catalytically active macromolecules and abiotic nanocolloids, that are smaller than motile bacteria, can self-propel. Kinematic reversibility at low Reynolds number demands that self-propelling colloids must break symmetry. Methods that permit the synthesis and fabrication of Janus nanocolloids are therefore briefly surveyed, as well as means that permit the analysis of the nanocolloids’ motion. Finally, recent work is reviewed which shows that nanoagents are small enough to penetrate the complex inhomogeneous polymeric network of biological fluids and gels, which exhibit diverse rheological behaviors.     

Measurement and prediction of binary mixture flash point

The flash points of three binary mixtures, containing n-heptane, o-xylene, m-xylene and ethylbenzene, were measured by Pensky-Martens closed cup tester. The experimental data were compared with the calculated values using Liaw’s Model with the application of Raoult’s Law and Wilson equation. These equations were in good qualitative agreement.     

Effect of surface treatments on the localized corrosion resistance of the AA2198-T8 aluminum lithium alloy welded by FSW process

In this work, the effect of eight types of surface treatments on the corrosion resistance of friction stir welded samples of an AA2198-T8 Al-Cu-Li alloy were tested and compared in an attempt to find suitable alternatives to toxic and carcinogenic hexavalent chromium treatments. All the samples were anodized and subjected to different post-anodizing treatments. The post-anodizing treatments were (1) hydrothermal treatment in Ce (NO₃)₃ 6H₂O solution; (2) hydrothermal treatment in Ce (NO₃)₃ 6H₂O solution with H₂O₂; (3) hydrothermal treatment in boiling water; (4) hexavalent chromium conversion coating; and (5) immersion in BTSE (bis-1,2-(triethoxysilyl) ethane. The corrosion resistance of the treated samples was evaluated by immersion tests in sodium chloride solution (0.1 mol L⁻¹ NaCl) and electrochemical impedance spectroscopy (EIS) of the friction stir weldment. The results showed that among the alternative treatments, the Ce-containing solutions presented the best corrosion resistance, especially when used without peroxide.     

Synthesis,thermal, spectral,antimicrobial and cytotoxicity profile of the Schiff bases bearing pyrazolone moiety and their Cu(II) complexes

Journal of Thermal Analysis and Calorimetry - A series of Schiff bases resulted in the [1?+?1] condensation of 8-alkyl-2-hydroxy-tricyclo[7.3.1.02.7]-tridecan-13-one with the...     

Factors influencing the synthesis and the post-modification of PEGylated pentafluorophenyl acrylate containing copolymers

Copolymerization reactions involving oligoethylene glycol acrylate (OEGA) or diethylene glycol acrylate (DEGA) with pentafluorophenyl acrylate (PFPA) have been performed by reversible addition fragmentation transfer (RAFT) polymerization. The effect of the reaction conditions on the nucleophilic acyl substitution reactions of PFPA was studied using a model amine (furfuryl amine). The resulting PEG/PFP functional copolymers were then used as scaffolds to produce a library of polymers by reaction with a range of amines.