Characterization of diazeniumdiolate nitric oxide donors (NONOates) by electrospray ionization mass spectrometry

Diazeniumdiolates (also called NONOates) have been analyzed by electrospray ionization mass spectrometry (ESI-MS). The samples used are commercially available and included Diethylamine NONOate, DETA NONOate, Spermine NONOate, MAHMA NONOate, PROLI NONOate, Dipropylenetriamine NONOate, PAPA NONOate, and Sulpho NONOate. These compounds have been found to ionize upon ESI by protonation, deprotonation and sodiation. The MS(n) experiments provided strong evidence that such ions release NO, HNO, N(2)O, NO(2), N(2)O(2), N(3)O(3), N(4)O(3) and N(4)O(4) when collisionally activated. Thus, the facile donation of NO units is a property of such compounds. Negative-mode mass spectrometry has been particularly useful for the analysis of most of the NONOates studied here. The experiments have demonstrated the capabilities of mass spectrometry, along with CAD (MS/MS), to detect and characterize such compounds.     

Tetrachlorocarbonyliridates: water-soluble carbon monoxide releasing molecules rate-modulated by the sixth ligand

A new family of compounds is presented as potential carbon monoxide releasing molecules (CORMs). These compounds, based on tetrachlorocarbonyliridate(III) derivatives, were synthesized and fully characterized by X-ray diffraction, electrospray mass spectrometry, IR, NMR, and density functional theory calculations. The rate of CO release was studied via the myoglobin assay. The results showed that the rate depends on the nature of the sixth ligand, trans to CO, and that a significant modulation on the release rate can be produced by changing the ligand. The reported compounds are soluble in aqueous media, and the rates of CO release are comparable with those for known CORMs, releasing CO at a rate of 0.03-0.58 μM min(-1) in a 10 μM solution of myoglobin and 10 μM of the complexes.     

Macrocybin,a Natural Mushroom Triglyceride,Reduces Tumor Growth In Vitro and In Vivo through Caveolin-Mediated Interference with the Actin Cytoskeleton

Mushrooms have been used for millennia as cancer remedies. Our goal was to screen several mushroom species from the rainforests of Costa Rica, looking for new antitumor molecules. Mushroom extracts were screened using two human cell lines: A549 (lung adenocarcinoma) and NL20 (immortalized normal lung epithelium). Extracts able to kill tumor cells while preserving non-tumor cells were considered “anticancer”. The mushroom with better properties was Macrocybe titans. Positive extracts were fractionated further and tested for biological activity on the cell lines. The chemical structure of the active compound was partially elucidated through nuclear magnetic resonance, mass spectrometry, and other ancillary techniques. Chemical analysis showed that the active molecule was a triglyceride containing oleic acid, palmitic acid, and a more complex fatty acid with two double bonds. The synthesis of all possible triglycerides and biological testing identified the natural compound, which was named Macrocybin. A xenograft study showed that Macrocybin significantly reduces A549 tumor growth. In addition, Macrocybin treatment resulted in the upregulation of Caveolin-1 expression and the disassembly of the actin cytoskeleton in tumor cells (but not in normal cells). In conclusion, we have shown that Macrocybin constitutes a new biologically active compound that may be taken into consideration for cancer treatment.     

Fatty Acid Carboxylate‐ and Anionic Surfactant‐Controlled Delivery Systems That Use Mesoporous Silica Supports

We report the preparation of a MCM‐41 mesoporous material that contains the dye [Ru(bipy)₃]Cl₂ (bipy=bipyridine) inside the mesopores and functionalised with suitable binding groups at the entrance of the pores. Solids S1 – S3 were obtained by the reaction of the mesoporous material with N‐methyl‐N′‐propyltrimethoxysilylimidazolium chloride, N‐phenyl‐N′‐[3‐(trimethoxysilyl)propyl]thiourea, or N‐phenyl‐N′‐[3‐(trimethoxysilyl)propyl]urea, respectively. A study of the dye delivery of these systems in buffered water (pH 7.0, 2‐[4‐(2‐hydroxyethyl)piperazin‐1‐yl]ethanesulfonic acid (HEPES), 10^?3 mol dm^?3) in the presence of a family of carboxylate ions was carried out. In the interaction of the anions with the surface of the solids, the response depends on the characteristics of the binding groups (i.e., imidazolium, urea and thiourea) at the pore outlets and their specific interaction with the corresponding anion. The interaction of long‐chain carboxylate ions with the binding sites at the surface of the solids resulted in a remarkable inhibition of the delivery of the dye. This inhibition was observed clearly for the dodecanoate anion, whereas the octanoate, decanoate, cholate, deoxycholate, glycodeoxycholate and taurocholate anions induced a certain pore blockage that varied according to the solid studied. The interaction of smaller anions, such as acetate, butanoate, hexanoate and octanoate, with the solids had no effect on the dye release process. The possible use of the gating system for the chromo‐fluorogenic detection of anionic surfactants through selective dye delivery inhibition was also explored. Molecular dynamic simulations that use force‐field methods have been made to theoretically study the capping carboxylate mechanism. The calculations are in agreement with the experimental results, thus allowing a representation of the dye delivery inhibition in the presence of long‐chain carboxylate ions.     

Combined cysteine and homocysteine quantitation in plasma by trap and release membrane introduction mass spectrometry

Recently, a new and efficient method for total homocysteine (tHcy) quantitation in plasma using trap and release membrane introduction mass spectrometry (T&R-MIMS) with a versatile removable direct introduction membrane probe (DIMP) was described [R. Haddad, M. A. Mendes, N. F. Hoehr and M. N. Eberlin, Analyst, 2001, 126, 1212]. Herein we report on the use of the DIMP-T&R-MIMS technique for total cysteine (tCys) quantitation; hence combined tCys and tHcy quantitation in plasma or serum can be achieved. The method employs Cys and Hcy derivatization with ethyl chloroformate (after disulfide bond reduction with dithiothreitol and protein precipitation with trichloroacetic acid), preconcentration in a capillary silicone membrane, and their thermal desorption to the gas phase inside the ion source region of a mass spectrometer, at a point exactly between the two ionization filaments. Thermal desorption uses the uniform heat radiation provided by the two ionization filaments. The analytes are then ionized by electron ionization and both Cys and Hcy are quantitated by mass spectrometry using selected ion monitoring. For tCys quantitation, good linearity and reproducibility was observed for concentrations ranging from 5 to 350 microM, recovery was near 95%, and the limit of detection (LOD) was of 2 microM. This LOD is well below the mean Cys concentration in plasma, and serum samples from a large group of healthy people showed a mean tCys concentration of 132 +/- 45 microM.     

Synthesis of [1,3]dithiole and spiro[1,3]dithiole thiopyran derivatives of the [1,2]dithiolo[1,4]thiazine ring system

We report the synthesis of some new polysulfur-nitrogen heterocycles by cycloaddition reactions to readily available tricyclic condensed 1,2-dithiole-3-thiones. Thus, treatment of bis[1,2]dithiolopyrrole ketothione 1 with diacyl acetylenes gave the bis-aducts 2a-d. On the other hand, cycloaddition of bis[1,2]dithiolo[1,4]thiazine ketothione 3 with 1 equiv of acyl or diacyl acetylenes gave [1,3]dithiolylidenyl[1,2]dithiolo[1,4]thiazines 4a-f in fair to high yields. Catalysis by scandium triflate was used in the reactions that implied the less reactive dipolarophiles. Treatment of 3 with 2 equiv of DBA gave the bis-aduct 5a, and reaction of 4c with DMAD gave the mixed bis-adduct 5b. Cyclic voltammetry of selected examples showed irreversible processes that were influenced by the electrochemical activity of peripheral groups bonded to the heterocyclic system.     

Recent advances in electrochemical water technologies for the treatment of antibiotics: A short review

This short review presents a critical overview of the most recent works published in the literature related to the use of electrochemical advanced oxidation processes (EAOPs) for the treatment of antibiotics present in synthetic and real wastewaters. The first section focuses on novelties within the traditional EAOPs, including electrochemical oxidation and electrochemical Fenton-based processes. The second section is devoted to new electrochemical technologies, including heterogeneous electro-Fenton, electrochemically activated persulfate processes, and combined processes. Future perspectives about these processes are also presented to aid the continuous evolution of research in the area.     

Investigation of thermal stability, spectral, magnetic, and antimicrobial behavior for new complexes of Ni(II), Cu(II), and Zn(II) with a bismacrocyclic ligand

Novel complexes of type M₂LCl₄·nH₂O (M: Ni, n = 4; M: Cu, n = 2.5 and M: Zn, n = 1.5; L: ligand resulted from 1,3-phenylenediamine, 3,6-diazaoctane-1,8-diamine, and formaldehyde one-pot condensation) were synthesized and characterized. The ligand was also isolated and characterized. The complexes features have been assigned from microanalytical, electrospray ionization tandem mass spectrometry, IR, UV–vis, ¹H NMR, and EPR spectra as well as magnetic data at room temperature. Simultaneous thermogravimetric/dynamic scanning calorimetry/evolved gas analysis measurements were performed to evidence the nature of the gaseous products formed in each step. Processes as water elimination, fragmentation, and oxidative degradation of the organic ligand as well as chloride elimination were observed during the thermal decomposition. The final product of decomposition was metal(II) oxide except for copper complex where CuCl remained also in the oxide network. The complexes exhibited an improved antibacterial activity in comparison with the ligand concerning both planktonic as well as biofilm-embedded cells.     

Evaluation of grinding methods for pellets preparation aiming at the analysis of plant materials by laser induced breakdown spectrometry

It has been demonstrated that laser induced breakdown spectrometry (LIBS) can be used as an alternative method for the determination of macro (P, K, Ca, Mg) and micronutrients (B, Fe, Cu, Mn, Zn) in pellets of plant materials. However, information is required regarding the sample preparation for plant analysis by LIBS. In this work, methods involving cryogenic grinding and planetary ball milling were evaluated for leaves comminution before pellets preparation. The particle sizes were associated to chemical sample properties such as fiber and cellulose contents, as well as to pellets porosity and density. The pellets were ablated at 30 different sites by applying 25 laser pulses per site (Nd:YAG@1064 nm, 5 ns, 10 Hz, 25 J cm⁻²). The plasma emission collected by lenses was directed through an optical fiber towards a high resolution echelle spectrometer equipped with an ICCD. Delay time and integration time gate were fixed at 2.0 and 4.5 μs, respectively. Experiments carried out with pellets of sugarcane, orange tree and soy leaves showed a significant effect of the plant species for choosing the most appropriate grinding conditions. By using ball milling with agate materials, 20 min grinding for orange tree and soy, and 60 min for sugarcane leaves led to particle size distributions generally lower than 75 μm. Cryogenic grinding yielded similar particle size distributions after 10 min for orange tree, 20 min for soy and 30 min for sugarcane leaves. There was up to 50% emission signal enhancement on LIBS measurements for most elements by improving particle size distribution and consequently the pellet porosity.