Investigations of the thermal stability and phase transformations in the system marocco phosphorite—(NH4)3H(SO4)2.NH4HSO4

Different physical chemical methods were used to study the thermochemical processes in a system involving a natural phosphate and complex acid salts of ammonium sulphate. The products of decomposition of the double ammonium salt and the products of their interactions with the phosphate were identified. The formation of ammonium and calcium polyphosphates and the disproportionation of P₃O ₁₀ ^5? and P₂O ₇ ^4? to PO ₄ ^3? and PO ₃ ^? were found to depend on the circumstances of the thermal interactions.     

Drying dip-coated colloidal films

We present the results from a small-angle X-ray scattering (SAXS) study of lateral drying in thin films. The films, initially 10 μm thick, are cast by dip-coating a mica sheet in an aqueous silica dispersion (particle radius 8 nm, volume fraction ?(s) = 0.14). During evaporation, a drying front sweeps across the film. An X-ray beam is focused on a selected spot of the film, and SAXS patterns are recorded at regular time intervals. As the film evaporates, SAXS spectra measure the ordering of particles, their volume fraction, the film thickness, and the water content, and a video camera images the solid regions of the film, recognized through their scattering of light. We find that the colloidal dispersion is first concentrated to ?(s) = 0.3, where the silica particles begin to jam under the effect of their repulsive interactions. Then the particles aggregate until they form a cohesive wet solid at ?(s) = 0.68 ± 0.02. Further evaporation from the wet solid leads to evacuation of water from pores of the film but leaves a residual water fraction ?(w) = 0.16. The whole drying process is completed within 3 min. An important finding is that, in any spot (away from boundaries), the number of particles is conserved throughout this drying process, leading to the formation of a homogeneous deposit. This implies that no flow of particles occurs in our films during drying, a behavior distinct to that encountered in the iconic coffee-stain drying. It is argued that this type of evolution is associated with the formation of a transition region that propagates ahead of the drying front. In this region the gradient of osmotic pressure balances the drag force exerted on the particles by capillary flow toward the liquid-solid front.     

Molecular dynamics simulation of hydrated DPPC monolayers using charge equilibration force fields

We present results of molecular dynamics simulations of a model DPPC-water monolayer using charge equilibration (CHEQ) force fields, which explicitly account for electronic polarization in a classical treatment of intermolecular interactions. The surface pressure, determined as the difference between the monolayer and pure water surface tensions at 323 K, is predicted to be 22.92 ±1.29 dyne/cm, just slightly below the broad range of experimental values reported for this system. The surface tension for the DPPC-water monolayer is predicted to be 42.35 ±1.16 dyne/cm, in close agreement with the experimentally determined value of 40.9 dyne/cm. This surface tension is also consistent with the value obtained from DPPC monolayer simulations using state-of-the-art nonpolarizable force fields. The current results of simulations predict a monolayer-water potential difference relative to the pure water-air interface of 0.64 ±0.02 Volts, an improved prediction compared to the fixed-charge CHARMM27 force field, yet still overestimating the experimental range of 0.3 to 0.45 Volts. As the charge equilibration model is a purely charge-based model for polarization, the current results suggest that explicitly modeled polarization effects can offer improvements in describing interfacial electrostatics in such systems.     

Ultraviolet photodissociation dynamics of the phenyl radical

Ultraviolet (UV) photodissociation dynamics of jet-cooled phenyl radicals (C(6)H(5) and C(6)D(5)) are studied in the photolysis wavelength region of 215-268 nm using high-n Rydberg atom time-of-flight and resonance enhanced multiphoton ionization techniques. The phenyl radicals are produced from 193-nm photolysis of chlorobenzene and bromobenzene precursors. The H-atom photofragment yield spectra have a broad peak centered around 235 nm and are in good agreement with the UV absorption spectra of phenyl. The H + C(6)H(4) product translational energy distributions, P(E(T))'s, peak near ~7 kcal/mol, and the fraction of average translational energy in the total excess energy, , is in the range of 0.20-0.35 from 215 to 268 nm. The H-atom product angular distribution is isotropic. The dissociation rates are in the range of 10(7)-10(8) s(-1) with internal energy from 30 to 46 kcal/mol above the threshold of the lowest energy channel H + o-C(6)H(4) (ortho-benzyne), comparable with the rates from the Rice-Ramsperger-Kassel-Marcus theory. The results from the fully deuterated phenyl radical are identical. The dissociation mechanism is consistent with production of H + o-C(6)H(4), as the main channel from unimolecular decomposition of the ground electronic state phenyl radical following internal conversion of the electronically excited state.     

On-chip electrochemical detection of CdS quantum dots using normal and multiple recycling flow through modes

A flexible hybrid polydimethylsiloxane (PDMS)-polycarbonate (PC) microfluidic chip with integrated screen printed electrodes (SPE) was fabricated and applied for electrochemical quantum dots (QDs) detection. The developed device combines the advantages of flexible microfluidic chips, such as their low cost, the possibility to be disposable and amenable to mass production, with the advantages of electrochemistry for its facility of integration and the possibility to miniaturize the analytical device. Due to the interest in biosensing applications in general and particularly the great demand for labelling alternatives in affinity biosensors, the electrochemistry of cadmium sulfide quantum dots (CdS QDs) is evaluated. Square wave anodic stripping voltammetry (SWASV) is the technique used due to its sensitivity and low detection limits that can be achieved. The electrochemical as well as the microfluidic parameters of the developed system are optimized. The detection of CdS QDs in the range between 50 to 8000 ng mL(-1) with a sensitivity of 0.0009 μA/(ng mL(-1)) has been achieved. In addition to the single in-chip flow through measurements, the design of a recirculation system with the aim of achieving lower detection limits using reduced volumes (25 μL) of sample was proposed as a proof-of-concept.     

Development of paper devices with conductive inks for sulfanilamide electrochemical determination in milk,synthetic urine,and environmental and pharmaceutical samples

Journal of Solid State Electrochemistry - This work describes a simple, rapid, and cost-effective method for fabrication of paper-based carbon electrode (US$ <0.01) using conductive ink...     

Electrochemical DNA biosensor for human papillomavirus 16 detection in real samples

An electrochemical DNA biosensor for human papillomavirus (HPV) 16 detection has been developed. For this proposed biosensor, l-cysteine was first electrodeposited on the gold electrode surface to form l-cysteine film (CYSFILM). Subsequently, HPV16-specific probe was immobilized on the electrode surface with CYSFILM. Electrochemistry measurement was studied by differential pulse voltammetry method (DPV). The measurement was based on the reduction signals of methylene blue (MB) before and after hybridization either between probe and synthetic target or extracted DNA from clinical samples. The effect of probe concentration was analyzed and the best results were seen at 1000 nM. The hybridization detection presented high sensitivity and broad linear response to the synthetic-target concentration comprised between 18.75 nM and 250 nM as well as to a detection limit of 18.13 nM. The performance of this biosensor was also investigated by checking probe-modified electrode hybridization with extracted DNA from samples. The results showed that the biosensor was successfully developed and exhibited high sensitivity and satisfactory selectivity to HPV16. These results allow for the possibility of developing a new portable detection system for HPVs and for providing help in making an effective diagnosis in the early stages of infection.     

Investigation of thermal stability, spectral, magnetic, and antimicrobial behavior for new complexes of Ni(II), Cu(II), and Zn(II) with a bismacrocyclic ligand

Novel complexes of type M₂LCl₄·nH₂O (M: Ni, n = 4; M: Cu, n = 2.5 and M: Zn, n = 1.5; L: ligand resulted from 1,3-phenylenediamine, 3,6-diazaoctane-1,8-diamine, and formaldehyde one-pot condensation) were synthesized and characterized. The ligand was also isolated and characterized. The complexes features have been assigned from microanalytical, electrospray ionization tandem mass spectrometry, IR, UV–vis, ¹H NMR, and EPR spectra as well as magnetic data at room temperature. Simultaneous thermogravimetric/dynamic scanning calorimetry/evolved gas analysis measurements were performed to evidence the nature of the gaseous products formed in each step. Processes as water elimination, fragmentation, and oxidative degradation of the organic ligand as well as chloride elimination were observed during the thermal decomposition. The final product of decomposition was metal(II) oxide except for copper complex where CuCl remained also in the oxide network. The complexes exhibited an improved antibacterial activity in comparison with the ligand concerning both planktonic as well as biofilm-embedded cells.     

Synthesis and Complexation Studies of Various Precursors Based on Calix[4]arene-crown-5 and -6 for the Immunoanalysis of Potassium and Caesium Ions

In an attempt to generate antibodies for the development of an immunoanalysis method for potassium and caesium ions, new 1,3-alternate calix[4]arenes-crown-5 and -6 bearing either carboxylic or hydroxyl functions were synthesized in good yields. Their complexation properties towards potassium and caesium ions were investigated using ¹H NMR spectroscopy and the usual properties proved to be preserved in the presence of the anchoring arms.