Detection of explosives on the surface of banknotes by Raman hyperspectral imaging and independent component analysis

The aim of this study was to develop a methodology using Raman hyperspectral imaging and chemometric methods for identification of pre- and post-blast explosive residues on banknote surfaces. The explosives studied were of military, commercial and propellant uses. After the acquisition of the hyperspectral imaging, independent component analysis (ICA) was applied to extract the pure spectra and the distribution of the corresponding image constituents. The performance of the methodology was evaluated by the explained variance and the lack of fit of the models, by comparing the ICA recovered spectra with the reference spectra using correlation coefficients and by the presence of rotational ambiguity in the ICA solutions. The methodology was applied to forensic samples to solve an automated teller machine explosion case. Independent component analysis proved to be a suitable method of resolving curves, achieving equivalent performance with the multivariate curve resolution with alternating least squares (MCR-ALS) method. At low concentrations, MCR-ALS presents some limitations, as it did not provide the correct solution. The detection limit of the methodology presented in this study was 50 μg cm⁻².     

How to handle nanomaterials? The re-entry of individuals into the philosophy of chemistry

In this paper we will argue that the categories of physical individuals and chemical stuff are not sufficient to face the chemical ontology if nanomaterials are taken into account. From a perspective that considers ontological questions and wonders which the items involved in science are, we will argue that the domain of nanoscience must be considered as populated by entities that are neither individuals, as those of physics, nor stuff, as those items of macro-chemistry. This discussion, in virtue of the analysis of the nature of nanomaterials, leads to propose a proper ontological category for nanoparticles: nanoindividuals. Nanomaterials are sorts of individuals, but they are different from physical individuals and from chemical stuff. We will also claim to contribute to the growing field of the philosophy of chemistry, especially regarding discussions that manifest not only epistemological but also ontological issues. In this scenario, the field on nanoscience is particularly challenging.     

Higher regularity of the free boundary in the parabolic Signorini problem

We show that the quotient of two caloric functions which vanish on a portion of an \(H^{k+ \alpha }\) regular slit is \(H^{k+ \alpha }\) at the slit, for \(k \ge 2\). In the case \(k=1\), we show that the quotient is in \(H^{1+\alpha }\) if the slit is assumed to be space-time \(C^{1, \alpha }\) regular. This can be thought of as a parabolic analogue of a recent important result in De Silva and Savin (Boundary Harnack estimates in slit domains and applications to thin free boundary problems, 2014), whose ideas inspired us. As an application, we show that the free boundary near a regular point of the parabolic thin obstacle problem studied in Danielli et al. (Optimal regularity and the free boundary in the parabolic Signorini problem. Mem. Am. Math. Soc., 2013) with zero obstacle is \(C^{\infty }\) regular in space and time.     

Adsorption studies of Cd(II) onto Al2O3/Nb2O5 mixed oxide dispersed on silica matrix and its on-line preconcentration and determination by flame atomic absorption spectrometry

The present study describes the adsorption characteristic of Cd(II) onto Nb₂O₅/Al₂O₃ mixed oxide dispersed on silica matrix. The characterization of the adsorbent has been carried out by infrared spectroscopy (IR), scanning electronic microscopy (SEM), energy dispersive spectroscopy (EDS), energy dispersive X-ray fluorescence analysis (EDXRF) and specific surface area (S_BET). From batch experiments, adsorption kinetic of Cd(II) was described by a pseudo-second-order kinetic model. The Langmuir linear isotherm fitted to the experimental adsorption isotherm very well, and the maximum adsorption capacity was found to be 17.88 mg g⁻¹. Using the effective material, a method for Cd(II) preconcentration at trace level was developed. The method was based on on-line adsorption of Cd(II) onto SiO₂/Al₂O₃/Nb₂O₅ at pH 8.64, in which the quantitative desorption occurs with 1.0 mol L⁻¹ hydrochloric acid towards FAAS detector. The experimental parameters related to the system were studied by means of multivariate analysis, using 2⁴ full factorial design and Doehlert matrix. The effect of SO₄²⁻, Cu²⁺, Zn²⁺ and Ni²⁺ foreign ions showed no interference at 1:100 analyte:interferent proportion. Under the most favorable experimental conditions, the preconcentration system provided a preconcentration factor of 18.4 times, consumption index of 1.08 mL, sample throughput of 14 h⁻¹, concentration efficiency of 4.35 min⁻¹, linear range from 5.0 up to 35.0 μg L⁻¹ and limits of detection and quantification of 0.19 and 0.65 μg L⁻¹ respectively. The feasibility of the proposed method for Cd(II) determination was assessed by analysis of water samples, cigarette sample and certified reference materials TORT-2 (Lobster hepatopancreas) and DOLT-4 (Dogfish liver).     

Self-assembled monolayers of disulfide Cu porphyrins on Au surfaces: adsorption induced reduction and demetalation

Metalloporphyrin molecules have a wide range of potential applications in diverse technological areas ranging from electronics to optoelectronics, electrochemistry, photophysics, chemical sensors, and catalysis. In particular, self-assembled monolayers of porphyrin molecules have recently attracted considerable interest. In this work we have studied for the first time the self-assembly of a novel Cu deutero porphyrin functionalized with disulfide moieties using electrochemical techniques, UV-vis absorption spectroscopy, polarization modulation infrared reflection absorption spectroscopy, and photoelectron spectroscopies (XPS and UPS). Experimental results indicate that the molecule adsorbs retaining its molecular integrity without forming molecular aggregates via the formation of Au-S covalent bonds. Furthermore, the monolayer consists of a packed array of molecules adsorbed with the plane of the porphyrin molecule at an angle of around 30° with respect to the surface normal. Interestingly, adsorption induces reduction of the Cu center and its consequent removal from the center of the porphyrin ring resulting in porphyrin demetalation. Our results are important in the design of self-assembled monolayers of metallo porphyrins where not only blocking of the metal center by the functional groups that drive the self-assembly should be considered but also possible adsorption induced demetalation with the consequent loss in the properties imparted by the metal center.     

Gold nanowire networks: synthesis, characterization, and catalytic activity

Gold nanowire networks (AuNWNs) with average widths of 17.74 nm (AuNWN(1)) or 23.54 nm (AuNWN(2)) were synthesized by direct reduction of HAuCl(4) with sodium borohydride powder in deep eutectic solvents, such as ethaline or reline, at 40 °C. Their width and length were dependent on the type of solvent and the NaBH(4)/HAuCl(4) molar ratio (32 in ethaline and 5.2 in reline). High resolution transmission electron microscopy (HR-TEM) analysis of the gold nanowire networks showed clear lattice fringes of polycrystalline nanopowder of d = 2.36, 2.04, 1.44, and 1.23 ? corresponding to the (111), (200), (220), or (311) crystallographic planes of face centered cubic gold. The purified AuNWNs were used as catalysts for the chemical reduction of p-nitroaniline to diaminophenylene with sodium borohydride in aqueous solution. The reaction was monitored in real time by UV-vis spectroscopy. The results show that the reduction process is six times faster in the presence of gold nanowire networks stabilized by urea from the reline (AuNWN(2)) than in the presence of gold nanowire networks stabilized by ethylene glycol from ethaline (AuNWN(1)). This is due to a higher number of corners and edges on the gold nanowires synthesized in reline than on those synthesized in ethaline as proven by X-ray diffraction (XRD) patterns recorded for both types of gold nanowire networks. Nevertheless, both types of nanomaterials determined short times of reaction and high conversion of p-nitroaniline to diaminophenylene. These gold nanomaterials represent a new addition to a new generation of catalysts: gold based catalysts.     

On the specificity of the amide VI band for the secondary structure of proteins

In this work we analyzed the specificity of the amide VI band for different types of secondary structure elements in protein structures. This band involves the bending motion of the CO group of the peptide chain that is typically observed in the spectral region from 590 to 490 cm⁻¹. The infrared absorbance spectra of a set of polypeptide model compounds of well known secondary structure was obtained at defined pH, including poly (l-lysine), poly (l-tyrosine), poly (l-alanine) and poly (l-histidine). In addition spectra of membrane proteins from the respiratory chain, namely the NADH:ubiquinone oxidoreductase, the cytochrome c oxidase and its Cu_A fragment, the cytochrome bc₁ complex, a Rieske-type protein and in addition myoglobin, have been comparatively investigated. The systematic analysis of the amide VI band of the polypeptides and the proteins allowed correlating the signal appearing at ∼525 cm⁻¹ to α-helical structures and signals at ∼545 cm⁻¹ to β-sheet contributions. Random coils have been found to contribute at ∼535 cm⁻¹ while the β-turns were observed at ∼560 cm⁻¹.     

Ethanol Production from Residual Wood Chips of Cellulose Industry: Acid Pretreatment Investigation,Hemicellulosic Hydrolysate Fermentation,and Remaining Solid Fraction Fermentation by SSF Process

Current research indicates the ethanol fuel production from lignocellulosic materials, such as residual wood chips from the cellulose industry, as new emerging technology. This work aimed at evaluating the ethanol production from hemicellulose of eucalyptus chips by diluted acid pretreatment and the subsequent fermentation of the generated hydrolysate by a flocculating strain of Pichia stipitis. The remaining solid fraction generated after pretreatment was subjected to enzymatic hydrolysis, which was carried out simultaneously with glucose fermentation [saccharification and fermentation (SSF) process] using a strain of Saccharomyces cerevisiae. The acid pretreatment was evaluated using a central composite design for sulfuric acid concentration (1.0–4.0 v/v) and solid to liquid ratio (1:2–1:4, grams to milliliter) as independent variables. A maximum xylose concentration of 50 g/L was obtained in the hemicellulosic hydrolysate. The fermentation of hemicellulosic hydrolysate and the SSF process were performed in bioreactors and the final ethanol concentrations of 15.3 g/L and 28.7 g/L were obtained, respectively.     

Searching for gallium bioactive compounds: Gallium(III) complexes of tridentate salicylaldehyde semicarbazone derivatives

In the search for gallium bioactive compounds five Ga(III) complexes, [Ga^III(L-H)₂](NO₃), with tridentate salicylaldehyde semicarbazone derivatives as ligands (L) have been synthesized and characterized in the solid state and in solution by different techniques. The crystal structure of [Ga^III(L4-H)₂](NO₃)·2H₂O, where L4 is 3-ethoxysalicylaldehyde semicarbazone, was solved by X-ray diffraction methods. The gallium(III) ion is in a distorted octahedral environment, coordinated to two nearly planar and mutually perpendicular 3-ethoxysalicylaldehyde semicarbazonato anions acting as tridentate ligands through their phenol and carbonyl oxygen atoms and their azomethine nitrogen atom. Their biological potential has been explored by evaluating their activity on Mycobacterium tuberculosis, causative agent of tuberculosis, and their cytotoxicity on tumor cell lines. Three different human tumor cell lines were selected that show different degrees of resistance to metallodrugs: ovarian A2780 (low resistance), breast MCF7 (medium resistance) and prostate PC3 (high resistance) cells. Although the complexes have not shown activity on M. tuberculosis, complexation with gallium has led to the enhancement of the cytotoxic potencies of the organic compounds. Those complexes that contain a bromide substituent at the phenolate ring have shown the highest cytotoxicities. In particular, [Ga^III(L2-H)₂](NO₃), where L2 is 5-bromosalicylaldehyde semicarbazone,·has shown a remarkable cytotoxicity on A2780 tumor cell line with an IC₅₀ value of the same order than cisplatin (IC_{50 Ga-L2} = 2.4 ± 0.3 μM; IC_{50 cisplatin} = 2.0 ± 0.1 μM, 72 h incubation at 37 °C). Interestingly, this complex has also shown moderate cytotoxicity against MCF7 and PC3 cells (IC_{50 MCF7} = 30 ± 6; IC_{50 PC3} = 18 ± 3 μM). Therefore, this gallium compound could be considered a promising wide spectrum potential anti-tumor agent.