A fullerene silirane derivative to improve the open circuit voltage in a polymer–fullerene solar cell: a theoretical study

In this letter quantum chemical calculations are performed on fullerene derivatives with varying reduction potentials, successfully used as electron acceptor in bulk heterojunction solar cells with the aim to investigate the energy levels of the frontier orbitals. We have successfully correlated the theoretical lowest unoccupied molecular orbital (LUMO) levels of different fullerenes with the open circuit voltage of the photovoltaic device based on the polymer–fullerene blend. We have also proposed a new fullerene silirane derivative with a raised LUMO level useful to increase the open circuit voltage of a polymer solar cell. (© 2008 WILEY‐VCH Verlag GmbH & Co. KGaA, Weinheim)     

High resolution NMR spectroscopy of heteroaromatic cations. II—pyrylium,thiapyrylium and seleninium cations

The barriers to internal rotation about the C? N bond in several thiopiperidides have been determined by the NMR technique. It was found that the barrier height (ΔG^?) increases in the series cinnamoylthiopiperidide<thiobenzoylpiperidide<phenylthioacetylpiperidide. This trend was discussed in terms of the electronic structure, using HMO calculations. For m-and p-substituted cinnamoylthiopiperidides the barriers were shown to increase with the electron withdrawing character of the substituent in the aromatic ring.     

Electronic nose screening of limonene release from multicomponent essential oils encapsulated in pectin gels

Multicomponent essential oils Tagetes Minuta and Poleo as well as pure limonene were encapsulated in Tween doped-high methoxylated pectin gels. Optical microscopy reveals that the obtained gels containing limonene consisted in a highly heterogeneous oil-in-water emulsion stabilised by the gelled medium. The influence of limonene encapsulation in pectin gelation kinetics and the gel structural properties were followed by dynamic rheological measurements. An electronic nose device developed in our laboratory was used to follow the flavour release of the three systems in order to discriminate the samples according to the main components released to the headspace. PCA and Neural Network Analysis allowed us to discriminate Tagetes Minuta from Poleo due to the difference in their limonene content. It is remarkable that the fingerprints of encapsulated complex mixtures differ from those obtained for the non-encapsulated oils, showing a preferential release of some components. In the case of limonene, the effect of the encapsulated concentration on the detected odour was also studied.     

Two-phase channel structures based on alpha-cyclodextrin-polyethylene glycol inclusion complexes

Wide-angle X-ray scattering observations of alpha-cyclodextrin (CD)-poly(ethylene glycol) (PEG) inclusion complexes (ICs) have shown for the first time that two crystalline columnar modifications (forms I and II) are produced in the process of their formation. This was made possible by precise azimuthal X-ray diffraction scanning of oriented IC samples. Form I is characterized by CDs threaded onto PEG chains and arranged along channels in the order head-to-head/tail-to-tail, while form II is formed by unbound CDs also arranged into columns in a head-to-tail and also possibly a head-to-head/tail-to-tail manner, probably as a result of template crystallization on the form I IC crystals. It was shown that similar structural peculiarities are inherent for channel structures based on ICs obtained with PEG with a wide range of molecular weights (MWs). The characteristic feature of ICs based on PEG, especially with MW > 8000, is the presence of unbound polymer in the composition of the complex. The amount of unbound PEG was shown to rise with increasing MW of PEG, resulting in greater imperfections in the IC crystalline structure. The polyblock structure of ICs based on alpha-CD and PEG was therefore proposed.     

Natural-based plasticizers and biopolymer films: A review

In recent years, much attention has been focused on research to replace petroleum-based commodity plastics, in a cost-effective manner, with biodegradable materials offering competitive mechanical properties. Biopolymers have been considered as the most promising materials for this purpose. However, they generally present poor mechanical properties regarding processability and end-use application, since the fragility and brittleness exhibited during thermoformation can limit their potential for application. In order to overcome this problem, plasticizers are added to provide the necessary workability to biopolymers. This class of products became more visible when biodegradable additives and plasticizers also became the focus of material scientists. The use of natural and/or biodegradable plasticizers, with low toxicity and good compatibility with several plastics, resins, rubber and elastomers in substitution of conventional plasticizers, such as phthalates and other synthetic conventional plasticizers attracted the market along with the increasing worldwide trend towards use of biopolymers. Here we discuss the main results and developments in natural plasticizer/synthetic and biopolymer-based films during the last decades.     

Asymmetric microbial reduction of ketones: absolute configuration of trans-4-ethyl-1-(1S-hydroxyethyl)cyclohexanol

A set of five fungal species, Botrytis cinerea, Trichoderma viride and Eutypa lata, and the endophytic fungi Colletotrichum crassipes and Xylaria sp., was used in screening for microbial biocatalysts to detect monooxygenase and alcohol dehydrogenase activities (for the stereoselective reduction of carbonyl compounds). 4-Ethylcyclohexanone and acetophenone were biotransformed by the fungal set. The main reaction pathways involved reduction and hydroxylations at several positions including tertiary carbons. B. cinerea was very effective in the bioreduction of both substrates leading to the chiral alcohol (S)-1-phenylethanol in up to 90% enantiomeric excess, and the cis–trans ratio for 4-ethylcyclohexanol was 0:100. trans-4-Ethyl-1-(1S-hydroxyethyl)cyclohexanol, obtained from biotransformation by means of an acyloin-type reaction, is reported here for the first time. The absolute configurations of the compounds trans-4-ethyl-1-(1S-hydroxyethyl)cyclohexanol and 4-(1S- and 4-(1R-hydroxyethyl)cyclohexanone were determined by NMR analysis of the corresponding Mosher’s esters.     

Thermal behavior of aromatic polyamic acids and polyimides containing oxadiazole rings

Two aromatic polyimides and the corresponding poly(amic acid)s, with oxadiazole and para/meta phenoxyphenylene rings in the backbone, were synthesized and the structure — thermal properties correlation was followed by dynamic mechanical analysis. Concerning the poly(amic acid)s, the glass transition domain was emphasized only for the compound with meta-oriented rings because the process of imidization takes place with increasing temperature. A multiplex experiment was performed to calculate the activation energy of the transition localized under 200°C. Consecutive heating-cooling-heating cycles were accomplished. All phenomena are discussed by cross-examination of the storage modulus (E′), loss modulus (E″) and loss factor tanδ variation with temperature.     

Effectiveness of Photodynamic Therapy in Elimination of HPV‐16 and HPV‐18 Associated with CIN I in Mexican Women

This study aimed to determine the effectiveness of photodynamic therapy (PDT), using δ‐aminolevulinic acid (5‐ALA), in the elimination of premalignant cervical lesions in Mexican patients with human papillomavirus (HPV) infection and/or cervical intraepithelial neoplasia (CIN). Thirty women diagnosed with CIN I and/or positive for HPV participated in the study. Topical 6% 5‐ALA in gel form was applied to the uterine cervix; after 4 h, the lesion area was irradiated with a light dose of 200 J cm^?2 at 635 nm. This procedure was performed three times at 48‐h intervals. Clinical follow‐up was performed at 3, 6, and 12 months after the initial PDT administration, by colposcopy, cervical cytology, histopathological analysis, polymerase chain reaction, and hybrid capture. Of HPV‐infected patients without evidence of CIN I, 80% cleared the infection, while HPV associated with CIN I was eliminated in 83% of patients (P < 0.05). At 12 months, CIN I had regressed in 57% of patients, although this response was not statistically significant. PDT using 6% 5‐ALA is concluded to be effective in eliminating HPV infection associated or not with CIN I.