Gold nanowire networks: synthesis, characterization, and catalytic activity

Gold nanowire networks (AuNWNs) with average widths of 17.74 nm (AuNWN(1)) or 23.54 nm (AuNWN(2)) were synthesized by direct reduction of HAuCl(4) with sodium borohydride powder in deep eutectic solvents, such as ethaline or reline, at 40 °C. Their width and length were dependent on the type of solvent and the NaBH(4)/HAuCl(4) molar ratio (32 in ethaline and 5.2 in reline). High resolution transmission electron microscopy (HR-TEM) analysis of the gold nanowire networks showed clear lattice fringes of polycrystalline nanopowder of d = 2.36, 2.04, 1.44, and 1.23 ? corresponding to the (111), (200), (220), or (311) crystallographic planes of face centered cubic gold. The purified AuNWNs were used as catalysts for the chemical reduction of p-nitroaniline to diaminophenylene with sodium borohydride in aqueous solution. The reaction was monitored in real time by UV-vis spectroscopy. The results show that the reduction process is six times faster in the presence of gold nanowire networks stabilized by urea from the reline (AuNWN(2)) than in the presence of gold nanowire networks stabilized by ethylene glycol from ethaline (AuNWN(1)). This is due to a higher number of corners and edges on the gold nanowires synthesized in reline than on those synthesized in ethaline as proven by X-ray diffraction (XRD) patterns recorded for both types of gold nanowire networks. Nevertheless, both types of nanomaterials determined short times of reaction and high conversion of p-nitroaniline to diaminophenylene. These gold nanomaterials represent a new addition to a new generation of catalysts: gold based catalysts.     

On the specificity of the amide VI band for the secondary structure of proteins

In this work we analyzed the specificity of the amide VI band for different types of secondary structure elements in protein structures. This band involves the bending motion of the CO group of the peptide chain that is typically observed in the spectral region from 590 to 490 cm⁻¹. The infrared absorbance spectra of a set of polypeptide model compounds of well known secondary structure was obtained at defined pH, including poly (l-lysine), poly (l-tyrosine), poly (l-alanine) and poly (l-histidine). In addition spectra of membrane proteins from the respiratory chain, namely the NADH:ubiquinone oxidoreductase, the cytochrome c oxidase and its Cu_A fragment, the cytochrome bc₁ complex, a Rieske-type protein and in addition myoglobin, have been comparatively investigated. The systematic analysis of the amide VI band of the polypeptides and the proteins allowed correlating the signal appearing at ∼525 cm⁻¹ to α-helical structures and signals at ∼545 cm⁻¹ to β-sheet contributions. Random coils have been found to contribute at ∼535 cm⁻¹ while the β-turns were observed at ∼560 cm⁻¹.     

Adsorption of chlorhexidine on synthetic hydroxyapatite and in vitro biological activity

The kinetic of chlorhexidine digluconate (CHXDG) uptake from aqueous solution by hydroxyapatite (HA) was investigated by ultraviolet (UV) analysis performed in HA powder (UV-solid) after the CHX adsorption. Adsorption isotherm of chlorhexidine (CHX) uptake was modeled by a combination of Languimir and Langmuir-Freundlich mechanisms. Strong molecule-molecule interactions and positive cooperativity predominated in the surface when CHX concentration was above 8.6 μg(CHX)/mg(HA). UV-solid spectra (shape, intensity and band position) of CHX bound to HA revealed that long-range molecular structures, such as aggregates or micelles, started to be formed at low CHX concentrations (1.52 μg(CHX)/mg(HA)) and predominated at high concentrations. Grazing-incidence X-ray diffraction (GIXRD) analysis from synchrotron radiation discarded the formation of crystalline structures on HA surface or precipitation of CHX crystalline salts, as suggested in previous works. The effect of the HA/CHX association on HA in vitro bioactivity, cytotoxicity and CHX antimicrobial activity was evaluated. It was shown that CHX did not inhibit the precipitation of a poorly crystalline apatite at HA/CHX surface after soaking in simulating body fluid (SBF). Cell viability studies after exposure to extracts of HA and HA/CHX showed that both biomaterials did not present significant in vitro toxicity. Moreover, HA/CHX inhibited Enterococcus faecalis growth for up to 6 days, revealing that binding to HA did not affect antimicrobial activity of CHX and reduced bacterial adhesion. These results suggested that HA/CHX association could result in a potential adjuvant antimicrobial system for clinical use.     

Ethanol Production from Residual Wood Chips of Cellulose Industry: Acid Pretreatment Investigation,Hemicellulosic Hydrolysate Fermentation,and Remaining Solid Fraction Fermentation by SSF Process

Current research indicates the ethanol fuel production from lignocellulosic materials, such as residual wood chips from the cellulose industry, as new emerging technology. This work aimed at evaluating the ethanol production from hemicellulose of eucalyptus chips by diluted acid pretreatment and the subsequent fermentation of the generated hydrolysate by a flocculating strain of Pichia stipitis. The remaining solid fraction generated after pretreatment was subjected to enzymatic hydrolysis, which was carried out simultaneously with glucose fermentation [saccharification and fermentation (SSF) process] using a strain of Saccharomyces cerevisiae. The acid pretreatment was evaluated using a central composite design for sulfuric acid concentration (1.0–4.0 v/v) and solid to liquid ratio (1:2–1:4, grams to milliliter) as independent variables. A maximum xylose concentration of 50 g/L was obtained in the hemicellulosic hydrolysate. The fermentation of hemicellulosic hydrolysate and the SSF process were performed in bioreactors and the final ethanol concentrations of 15.3 g/L and 28.7 g/L were obtained, respectively.     

Searching for gallium bioactive compounds: Gallium(III) complexes of tridentate salicylaldehyde semicarbazone derivatives

In the search for gallium bioactive compounds five Ga(III) complexes, [Ga^III(L-H)₂](NO₃), with tridentate salicylaldehyde semicarbazone derivatives as ligands (L) have been synthesized and characterized in the solid state and in solution by different techniques. The crystal structure of [Ga^III(L4-H)₂](NO₃)·2H₂O, where L4 is 3-ethoxysalicylaldehyde semicarbazone, was solved by X-ray diffraction methods. The gallium(III) ion is in a distorted octahedral environment, coordinated to two nearly planar and mutually perpendicular 3-ethoxysalicylaldehyde semicarbazonato anions acting as tridentate ligands through their phenol and carbonyl oxygen atoms and their azomethine nitrogen atom. Their biological potential has been explored by evaluating their activity on Mycobacterium tuberculosis, causative agent of tuberculosis, and their cytotoxicity on tumor cell lines. Three different human tumor cell lines were selected that show different degrees of resistance to metallodrugs: ovarian A2780 (low resistance), breast MCF7 (medium resistance) and prostate PC3 (high resistance) cells. Although the complexes have not shown activity on M. tuberculosis, complexation with gallium has led to the enhancement of the cytotoxic potencies of the organic compounds. Those complexes that contain a bromide substituent at the phenolate ring have shown the highest cytotoxicities. In particular, [Ga^III(L2-H)₂](NO₃), where L2 is 5-bromosalicylaldehyde semicarbazone,·has shown a remarkable cytotoxicity on A2780 tumor cell line with an IC₅₀ value of the same order than cisplatin (IC_{50 Ga-L2} = 2.4 ± 0.3 μM; IC_{50 cisplatin} = 2.0 ± 0.1 μM, 72 h incubation at 37 °C). Interestingly, this complex has also shown moderate cytotoxicity against MCF7 and PC3 cells (IC_{50 MCF7} = 30 ± 6; IC_{50 PC3} = 18 ± 3 μM). Therefore, this gallium compound could be considered a promising wide spectrum potential anti-tumor agent.     

Heparin Binding by Murine Recombinant Prion Protein Leads to Transient Aggregation and Formation of RNA-Resistant Species

The conversion of cellular prion protein (PrP(C)) into the pathological conformer PrP(Sc) requires contact between both isoforms and probably also requires a cellular factor, such as a nucleic acid or a glycosaminoglycan (GAG). Little is known about the structural features implicit in the GAG-PrP interaction. In the present work, light scattering, fluorescence, circular dichroism, and nuclear magnetic resonance (NMR) spectroscopy were used to describe the chemical and physical properties of the murine recombinant PrP 23-231 interaction with low molecular weight heparin (LMWHep) at pH 7.4 and 5.5. LMWHep interacts with rPrP 23-231, thereby inducing transient aggregation. The interaction between murine rPrP and heparin at pH 5.5 had a stoichiometry of 2:1 (LMWHep:rPrP 23-231), in contrast to a 1:1 binding ratio at pH 7.4. At binding equilibrium, NMR spectra showed that rPrP complexed with LMWHep had the same general fold as that of the free protein, even though the binding can be indicated by significant changes in few residues of the C-terminal domain, especially at pH 5.5. Notably, the soluble LMWHep:rPrP complex prevented RNA-induced aggregation. We also investigated the interaction between LMWHep and the deletion mutants rPrP Δ51-90 and Δ32-121. Heparin did not bind these constructs at pH 7.4 but was able to interact at pH 5.5, indicating that this glycosaminoglycan binds the octapeptide repeat region at pH 7.4 but can also bind other regions of the protein at pH 5.5. The interaction at pH 5.5 was dependent on histidine residues of the murine rPrP 23-231. Depending on the cellular milieu, the PrP may expose different regions that can bind GAG. These results shed light on the role of GAGs in PrP conversion. The transient aggregation of PrP may explain why some GAGs have been reported to induce the conversion into the misfolded, scrapie conformation, whereas others are thought to protect against conversion. The acquired resistance of the complex against RNA-induced aggregation explains some of the unique properties of the PrP interaction with GAGs.     

Na[Li(NH2BH3)2]--the first mixed-cation amidoborane with unusual crystal structure

We describe the successful synthesis of the first mixed-cation (pseudoternary) amidoborane, Na[Li(NH(2)BH(3))(2)], with theoretical hydrogen capacity of 11.1 wt%. Na[Li(NH(2)BH(3))(2)] crystallizes triclinic (P1) with a = 5.0197(4) ?, b = 7.1203(7) ?, c = 8.9198(9) ?, α = 103.003(6)°, β = 102.200(5)°, γ = 103.575(5)°, and V = 289.98(5) ?(3) (Z = 2), as additionally confirmed by Density Functional Theory calculations. Its crystal structure is topologically different from those of its orthorhombic LiNH(2)BH(3) and NaNH(2)BH(3) constituents, with distinctly different coordination spheres of Li (3 N atoms and 1 hydride anion) and Na (6 hydride anions). Na[Li(NH(2)BH(3))(2)], which may be viewed as a product of a Lewis acid (LiNH(2)BH(3))/Lewis base (NaNH(2)BH(3)) reaction, is an important candidate for a novel lightweight hydrogen storage material. The title material decomposes at low temperature (with onset at 75 °C, 6.0% mass loss up to 110 °C, and an additional 3.0% up to 200 °C) while evolving hydrogen contaminated with ammonia.     

Uniform approximations for the M/G/1 queue with subexponential processing times

This paper studies the asymptotic behavior of the steady-state waiting time, W _∞, of the M/G/1 queue with Subexponential processing times for different combinations of traffic intensities and overflow levels. In particular, we provide insights into the regions of large deviations where the so-called heavy-traffic approximation and heavy-tail asymptotic hold. For queues whose service time distribution decays slower than \(e^{-\sqrt{t}}\) we identify a third region of asymptotics where neither the heavy-traffic nor the heavy-tail approximations are valid. These results are obtained by deriving approximations for P(W _∞>x) that are either uniform in the traffic intensity as the tail value goes to infinity or uniform on the positive axis as the traffic intensity converges to one. Our approach makes clear the connection between the asymptotic behavior of the steady-state waiting time distribution and that of an associated random walk.     

Synthesis and application of imprinted polyvinylimidazole-silica hybrid copolymer for Pb determination by flow-injection thermospray flame furnace atomic absorption spectrometry

A novel ion imprinted polyvinylimidazole-silica hybrid copolymer (IIHC) was synthesized and used as a selective solid sorbent for Pb²⁺ ions preconcentration using an on-line solid phase extraction (SPE) system coupled to TS-FF-AAS. The ionic hybrid sorbent was prepared using 1-vinylimidazole and 3-(trimethoxysilyl)propylmethacrylate as monomers, Pb²⁺ ions as template, tetraethoxysilane as reticulating agent and 2,2′-azobis-isobutyronitrile as initiator. The best on-line SPE conditions concerning sorption behavior, including sample pH (6.46), buffer concentration (9.0 mmol L⁻¹), eluent (HNO₃) concentration (0.5 mol L⁻¹) and preconcentration flow rate (4.0 mL min⁻¹), were optimized by means of full factorial design and Doehlert matrix. The analytical curve ranged from 2.5 to 65.0 μg L⁻¹ (r = 0.999) with limit of detection of 0.75 μg L⁻¹; the precision (repeatability) calculated as relative standard deviation (n = 10) was 5.0 and 3.6% for Pb²⁺ concentration of 10.0 and 60.0 μg L⁻¹, respectively. From on-line breakthrough curve, column capacity was 3.5 mg g⁻¹. Preconcentration factor (PF), consumptive index (CI) and concentration efficiency (CE) were 128.0, 0.16 mL and 25.6 min⁻¹, respectively. The selective performance of the sorbent, based on relative selectivity coefficient, was compared to NIC (non imprinted copolymer) for the binary mixture Pb²⁺/Cd²⁺, Pb²⁺/Cu²⁺ and Pb²⁺/Zn²⁺. The results showed that ion imprinted polyvinylimidazole-silica hybrid polymer had higher selectivity for Pb²⁺ than NIC at 64.9, 16.0 and 8.8 folds. The developed method was successfully applied for highly sensitive and selective Pb²⁺ determination in different kinds of water samples, parenteral solutions and urine. Accuracy was also assessed by analyzing certified reference fish protein (DORM-3) and marine sediment (MESS-3 and PACS-2) with satisfactory results.