Dynamic Inclusion Complexes of Metal Nanoparticles Inside Nanocups

Host–guest inclusion complexes are abundant in molecular systems and of fundamental importance in living organisms. Realizing a colloidal analogue of a molecular dynamic inclusion complex is challenging because inorganic nanoparticles (NPs) with a well‐defined cavity and portal are difficult to synthesize in high yield and with good structural fidelity. Herein, a generic strategy towards the fabrication of dynamic 1:1 inclusion complexes of metal nanoparticles inside oxide nanocups with high yield (>70 %) and regiospecificity (>90 %) by means of a reactive double Janus nanoparticle intermediate is reported. Experimental evidence confirms that the inclusion complexes are formed by a kinetically controlled mechanism involving a delicate interplay between bipolar galvanic corrosion and alloying–dealloying oxidation. Release of the NP guest from the nanocups can be efficiently triggered by an external stimulus.     

Unraveling the Degradation Mechanism of Purine Nucleotides Photosensitized by Pterins: The Role of Charge‐Transfer Steps

Photosensitized reactions contribute to the development of skin cancer and are used in many applications. Photosensitizers can act through different mechanisms. It is currently accepted that if the photosensitizer generates singlet molecular oxygen (¹O₂) upon irradiation, the target molecule can undergo oxidation by this reactive oxygen species and the reaction needs dissolved O₂ to proceed, therefore the reaction is classified as ¹O₂‐mediated oxidation (type II mechanism). However, this assumption is not always correct, and as an example, a study on the degradation of 2′‐deoxyguanosine 5′‐monophosphate photosensitized by pterin is presented. A general mechanism is proposed to explain how the degradation of biological targets, such as nucleotides, photosensitized by pterins, naturally occurring ¹O₂ photosensitizers, takes place through an electron‐transfer‐initiated process (type I mechanism), whereas the contribution of the ¹O₂‐mediated oxidation is almost negligible.     

A surface wipe sampling and LC–MS/MS method for the simultaneous detection of six antineoplastic drugs commonly handled by healthcare workers

An effective wipe sampling and LC–MS/MS method was developed to simultaneously analyze six commonly administered antineoplastic drugs in stainless steel surface. The analyzed drugs were methotrexate, paclitaxel, cyclophosphamide, 5-fluorouracil, vincristine, and oxaliplatin, a frequently prepared antineoplastic drug that has not been included among any of the published simultaneous detection methods. The established method was used to evaluate the recoveries of antineoplastic drugs on brand new and worn stainless steel surfaces by wiping the plates with a Whatman filter paper wetted with 0.5 mL of water/methanol (20:80) with 0.1 % formic acid followed by LC–MS/MS before desorbing the filter with a water/methanol (50:50) solution. A significant decrease in the recovery of all evaluated drugs was found when worn plates were used. Additionally, the inter-personnel variability on drug recoveries during wiping procedures was evaluated. Significantly higher recoveries were achieved by the personnel with more training and experience versus personnel without prior experience. Finally, a laboratory stability test was developed to assess the degradation of the antineoplastic drugs during replicated shipping conditions. With the exception of vincristine sulfate which exhibited a significant (p?<?0.05) degradation after 48 h, all evaluated drugs were stable during the first 24–48 h. However, after 144 h, an increase in the degradation of all evaluated drugs was observed, with oxaliplatin and 5-fluorouracil exhibiting the most degradation.     

Contrasting confocal with defocusing microscale spatially offset Raman spectroscopy

The study compares and contrasts conventional confocal Raman microscopy/spectroscopy (CRM) with a recently developed micrometer scale defocusing spatially offset Raman spectroscopy (micro‐SORS), a method providing a new analytical capability for investigating non‐destructively the chemical composition of subsurface, micrometer‐scale‐thick diffusely scattering layers at depths beyond the reach of CRM. Because of close similarities between the two techniques and comparable embodiment of the instrumentations, but radically different interpretations of data, it is crucially important to recognise which type of method is pertinent to a specific measurement. The distinction comes principally from the nature of sample, whether turbid (micro‐SORS measurement) or transparent (CRM measurement) on the spatial scale of the axial (z‐)scan of the measurement. Which type of sample one deals with may not always be easily recognisable with micro‐scale thick layers, and the study therefore also presents a simple method for suggesting whether CRM or micro‐SORS methodology applies. This test relies on an axial (z‐)scan performed through the sample in both the positive and negative directions from the normal, imaged sample surface position using conventional CRM instrument. The absence or presence of symmetry or asymmetry of the intensity profiles of measured Raman signals around the imaged sample surface position as a function of sample axial displacement then suggests which interpretation could apply. The study paves a way for the development of micro‐SORS as a widely applicable analytical tool deployable on conventional Raman microscopes. Copyright © 2015 John Wiley & Sons, Ltd.     

Detection of explosives on the surface of banknotes by Raman hyperspectral imaging and independent component analysis

The aim of this study was to develop a methodology using Raman hyperspectral imaging and chemometric methods for identification of pre- and post-blast explosive residues on banknote surfaces. The explosives studied were of military, commercial and propellant uses. After the acquisition of the hyperspectral imaging, independent component analysis (ICA) was applied to extract the pure spectra and the distribution of the corresponding image constituents. The performance of the methodology was evaluated by the explained variance and the lack of fit of the models, by comparing the ICA recovered spectra with the reference spectra using correlation coefficients and by the presence of rotational ambiguity in the ICA solutions. The methodology was applied to forensic samples to solve an automated teller machine explosion case. Independent component analysis proved to be a suitable method of resolving curves, achieving equivalent performance with the multivariate curve resolution with alternating least squares (MCR-ALS) method. At low concentrations, MCR-ALS presents some limitations, as it did not provide the correct solution. The detection limit of the methodology presented in this study was 50 μg cm⁻².     

How to handle nanomaterials? The re-entry of individuals into the philosophy of chemistry

In this paper we will argue that the categories of physical individuals and chemical stuff are not sufficient to face the chemical ontology if nanomaterials are taken into account. From a perspective that considers ontological questions and wonders which the items involved in science are, we will argue that the domain of nanoscience must be considered as populated by entities that are neither individuals, as those of physics, nor stuff, as those items of macro-chemistry. This discussion, in virtue of the analysis of the nature of nanomaterials, leads to propose a proper ontological category for nanoparticles: nanoindividuals. Nanomaterials are sorts of individuals, but they are different from physical individuals and from chemical stuff. We will also claim to contribute to the growing field of the philosophy of chemistry, especially regarding discussions that manifest not only epistemological but also ontological issues. In this scenario, the field on nanoscience is particularly challenging.     

Higher regularity of the free boundary in the parabolic Signorini problem

We show that the quotient of two caloric functions which vanish on a portion of an \(H^{k+ \alpha }\) regular slit is \(H^{k+ \alpha }\) at the slit, for \(k \ge 2\). In the case \(k=1\), we show that the quotient is in \(H^{1+\alpha }\) if the slit is assumed to be space-time \(C^{1, \alpha }\) regular. This can be thought of as a parabolic analogue of a recent important result in De Silva and Savin (Boundary Harnack estimates in slit domains and applications to thin free boundary problems, 2014), whose ideas inspired us. As an application, we show that the free boundary near a regular point of the parabolic thin obstacle problem studied in Danielli et al. (Optimal regularity and the free boundary in the parabolic Signorini problem. Mem. Am. Math. Soc., 2013) with zero obstacle is \(C^{\infty }\) regular in space and time.     

Adsorption studies of Cd(II) onto Al2O3/Nb2O5 mixed oxide dispersed on silica matrix and its on-line preconcentration and determination by flame atomic absorption spectrometry

The present study describes the adsorption characteristic of Cd(II) onto Nb₂O₅/Al₂O₃ mixed oxide dispersed on silica matrix. The characterization of the adsorbent has been carried out by infrared spectroscopy (IR), scanning electronic microscopy (SEM), energy dispersive spectroscopy (EDS), energy dispersive X-ray fluorescence analysis (EDXRF) and specific surface area (S_BET). From batch experiments, adsorption kinetic of Cd(II) was described by a pseudo-second-order kinetic model. The Langmuir linear isotherm fitted to the experimental adsorption isotherm very well, and the maximum adsorption capacity was found to be 17.88 mg g⁻¹. Using the effective material, a method for Cd(II) preconcentration at trace level was developed. The method was based on on-line adsorption of Cd(II) onto SiO₂/Al₂O₃/Nb₂O₅ at pH 8.64, in which the quantitative desorption occurs with 1.0 mol L⁻¹ hydrochloric acid towards FAAS detector. The experimental parameters related to the system were studied by means of multivariate analysis, using 2⁴ full factorial design and Doehlert matrix. The effect of SO₄²⁻, Cu²⁺, Zn²⁺ and Ni²⁺ foreign ions showed no interference at 1:100 analyte:interferent proportion. Under the most favorable experimental conditions, the preconcentration system provided a preconcentration factor of 18.4 times, consumption index of 1.08 mL, sample throughput of 14 h⁻¹, concentration efficiency of 4.35 min⁻¹, linear range from 5.0 up to 35.0 μg L⁻¹ and limits of detection and quantification of 0.19 and 0.65 μg L⁻¹ respectively. The feasibility of the proposed method for Cd(II) determination was assessed by analysis of water samples, cigarette sample and certified reference materials TORT-2 (Lobster hepatopancreas) and DOLT-4 (Dogfish liver).     

Self-assembled monolayers of disulfide Cu porphyrins on Au surfaces: adsorption induced reduction and demetalation

Metalloporphyrin molecules have a wide range of potential applications in diverse technological areas ranging from electronics to optoelectronics, electrochemistry, photophysics, chemical sensors, and catalysis. In particular, self-assembled monolayers of porphyrin molecules have recently attracted considerable interest. In this work we have studied for the first time the self-assembly of a novel Cu deutero porphyrin functionalized with disulfide moieties using electrochemical techniques, UV-vis absorption spectroscopy, polarization modulation infrared reflection absorption spectroscopy, and photoelectron spectroscopies (XPS and UPS). Experimental results indicate that the molecule adsorbs retaining its molecular integrity without forming molecular aggregates via the formation of Au-S covalent bonds. Furthermore, the monolayer consists of a packed array of molecules adsorbed with the plane of the porphyrin molecule at an angle of around 30° with respect to the surface normal. Interestingly, adsorption induces reduction of the Cu center and its consequent removal from the center of the porphyrin ring resulting in porphyrin demetalation. Our results are important in the design of self-assembled monolayers of metallo porphyrins where not only blocking of the metal center by the functional groups that drive the self-assembly should be considered but also possible adsorption induced demetalation with the consequent loss in the properties imparted by the metal center.