Capture of toxic gases in MOFs: SO2, H2S,NH3 and NOx

MOFs are promising candidates for the capture of toxic gases since their adsorption properties can be tuned as a function of the topology and chemical composition of the pores. Although the main drawback of MOFs is their vulnerability to these highly corrosive gases which can compromise their chemical stability, remarkable examples have demonstrated high chemical stability to SO₂, H₂S, NH₃ and NO_x. Understanding the role of different chemical functionalities, within the pores of MOFs, is the key for accomplishing superior captures of these toxic gases. Thus, the interactions of such functional groups (coordinatively unsaturated metal sites, μ-OH groups, defective sites and halogen groups) with these toxic molecules, not only determines the capture properties of MOFs, but also can provide a guideline for the desigh of new multi-functionalised MOF materials. Thus, this perspective aims to provide valuable information on the significant progress on this environmental-remediation field, which could inspire more investigators to provide more and novel research on such challenging task.

MOFs are promising candidates for the capture of toxic gases such as SO₂, H₂S, NH₃ and NOx. Understanding the role of different chemical functionalities, within the pores of MOFs, is the key for accomplishing superior captures of these toxic gases.     

Type I Photosensitization of 2′‐deoxyadenosine 5′‐monophosphate (5′‐dAMP) by Biopterin and its Photoproduct Formylpterin

Biopterin (Bip) and its photoproducts 6‐formylpterin (Fop) and 6‐carboxypterin (Cap) accumulate in the skin of patients suffering from vitiligo, a chronic depigmentation disorder where the protection against UV radiation fails because of the lack of melanin. These compounds absorb in the UV‐A inducing a potential photosensitizing action that can cause damage to DNA and other biomolecules. In this work, we have investigated the capability of these pterin derivatives (Pt) to act as photosensitizers under UV‐A irradiation for the degradation of 2′‐deoxyadenosine 5′‐monophosphate (5′‐dAMP) in aqueous solutions, as model DNA target. Steady‐state and time‐resolved experiments were performed and the effect of pH was evaluated. The results showed that photosensitized degradation of 5′‐dAMP was only observed under acidic conditions, and a mechanistic analysis revealed the participation of the triplet excited state of the pterin derivatives (³Pt*) by electron transfer yielding the corresponding pair of radical ions (Pt^?? and 5′‐dAMP^?+), with successive photosensitizer recovery by electron transfer from Pt^?? to O₂. Finally, 5′‐dAMP^?+ participates in subsequent reactions to yield degradation products.     

Natural-based plasticizers and biopolymer films: A review

In recent years, much attention has been focused on research to replace petroleum-based commodity plastics, in a cost-effective manner, with biodegradable materials offering competitive mechanical properties. Biopolymers have been considered as the most promising materials for this purpose. However, they generally present poor mechanical properties regarding processability and end-use application, since the fragility and brittleness exhibited during thermoformation can limit their potential for application. In order to overcome this problem, plasticizers are added to provide the necessary workability to biopolymers. This class of products became more visible when biodegradable additives and plasticizers also became the focus of material scientists. The use of natural and/or biodegradable plasticizers, with low toxicity and good compatibility with several plastics, resins, rubber and elastomers in substitution of conventional plasticizers, such as phthalates and other synthetic conventional plasticizers attracted the market along with the increasing worldwide trend towards use of biopolymers. Here we discuss the main results and developments in natural plasticizer/synthetic and biopolymer-based films during the last decades.     

Determination of arsenic in sediments, coal and fly ash slurries after ultrasonic treatment by hydride generation atomic absorption spectrometry and trapping in an iridium-treated graphite tube

A simple and reliable method for the determination of arsenic in sediment and in coal without sample digestion, based on hydride generation from slurry samples is proposed. After grinding the samples to a particle size of 50 μm, the sample powder was mixed with aqua regia and hydrofluoric acid in an ultrasonic bath for 30 min. After diluting the mixture with hydrochloric acid, the slurry was allowed to stand for 48 h, and an aliquot was used for hydride generation with sodium borohydride. More than 80% of the arsenic was leached to the aqueous phase under these conditions, except for one sediment sample with very high silica content. The generated arsine was collected in a graphite tube, treated with 0.5 mg of iridium as a permanent modifier, and the arsenic determination was carried out by electrothermal atomic absorption spectrometry. The same tube could be used for at least 160 cycles without any re-treatment. The greatest advantage of the method was that only a minimum of reagents and sample handling were required, reducing the risks of contamination and/or analyte loss. However, the addition calibration technique had to be used in order to obtain results within the 95% confidence level for 11 certified reference materials, 5 sediments, 5 coals and one coal fly ash. One certified sediment slurry was spiked with the analyte and the resulting addition calibration curve was used for the analysis of the certified sediments. Similarly, one certified coal was used to obtain the addition calibration curve for the coal and coal fly ash samples. The recoveries of the certified values, except for one sediment, were between 91 and 115%. The limits of detection in the samples were 0.54 and 0.7 μg g⁻¹ for the coal and sediment samples, respectively, obtained for 1 ml of slurry containing 1 mg of sample.     

The intramolecular vibrational energy redistribution threshold in S(1) deuterated p-difluorobenzene

The intramolecular vibrational energy redistribution (IVR) in S(1) deuterated p-difluorobenzene (pDFB-d(4) or -d(4)) has been studied to determine the IVR threshold. For this, the S(1) <-- S(0) fluorescence excitation (FE) spectrum of jet-cooled d(4) was investigated in the 2000-3250 cm(-1) vibronic energy range of the S(1) electronic state, and single vibronic level fluorescence (SVLF) spectra have been acquired by exciting selected levels lying between 750 and 2850 cm(-1) in vibrational energy in the S(1) excited state. Congestion of the dispersed fluorescence in this molecule first appears as the vibrational level energy climbs above 2000 cm(-1). By comparing the SVLF spectra of pDFB-d(4) with those of p-difluorobenzene (pDFB or -h(4)), it is obvious that IVR threshold in -d(4) is localized with a few hundreds cm(-1) lower than that in pDFB. This decrease is entirely due to the increase in vibrational state density due to deuteration.     

Inclusion complexes of γ-cyclodextrin and carboxyl-modified γ-cyclodextrin with C60: synthesis, characterization and controlled release application via microgels

Carboxyl modified γ-cyclodextrin (CDSA) with a substitution degree of about 9.5 was prepared by the esterification of γ-cyclodextrin (CD) with succinic anhydride in pyridine at 90 °C. The chemical composition and the structure of CDSA were characterized by FT-IR, MALDI-TOF, X-ray diffraction pattern, potentiometric titration and TGA. Modified and native γ-cyclodextrin associate with fullerene (C₆₀) in DMF-toluene mixture resulting 1:1 CDSA:C₆₀ and CD:C₆₀ inclusion complexes. Aqueous solutions of native cyclodextrin, carboxyl-modified cyclodextrin and their inclusion complexes with C₆₀ were used as microgel solvent (or swelling agent) for controlled release application. The release of solutions was induced by shear stress and demonstrated using rheo-optical set-up.     

In vitro photodynamic activity of chloro(5,10,15,20-tetraphenylporphyrinato)indium(III) loaded-poly(lactide-co-glycolide) nanoparticles in LNCaP prostate tumour cells

In(III)-meso-tetraphenylporphyrin (InTPP) was encapsulated into nanoparticles (smaller than 200 nm) of poly(d,l-lactide-co-glycolide) (PLGA) using the emulsification–evaporation technique. The photodynamic efficacy of InTPP-loaded nanoparticles and its cellular uptake was investigated with LNCaP prostate tumour cells, in comparison with the free InTPP. The effects of incubation time (1–3 h), drug concentration (1.8–7.7 μmol/L) and incident light dose (15–45 J/cm²) with both encapsulated and free InTPP were studied. The type of cell death induced by the photochemical process using both encapsulated and free InTPP was also investigated. Cell viability was reduced more significantly with increasing values of these effects for InTPP-loaded nanoparticles than with the free drug. The cellular death induced by both encapsulated and free InTPP was preponderantly apoptotic. Confocal laser scanning microscopy data showed that the InTPP-loaded nanoparticles, as well free InTPP, were localized in the cells, and always in the perinuclear region. Encapsulated InTPP was measured by the intensity of fluorescence intensity of cell extracts and was three times more internalized into the cells than was the free InTPP. Electron paramagnetic resonance experiments corroborated the participation of singlet oxygen in the photocytotoxic effect of nanoparticles loaded with InTPP.     

Determination of amylose content in starch using Raman spectroscopy and multivariate calibration analysis

Fourier transform Raman spectroscopy and chemometric tools have been used for exploratory analysis of pure corn and cassava starch samples and mixtures of both starches, as well as for the quantification of amylose content in corn and cassava starch samples. The exploratory analysis using principal component analysis shows that two natural groups of similar samples can be obtained, according to the amylose content, and consequently the botanical origins. The Raman band at 480 cm^?1, assigned to the ring vibration of starches, has the major contribution to the separation of the corn and cassava starch samples. This region was used as a marker to identify the presence of starch in different samples, as well as to characterize amylose and amylopectin. Two calibration models were developed based on partial least squares regression involving pure corn and cassava, and a third model with both starch samples was also built; the results were compared with the results of the standard colorimetric method. The samples were separated into two groups of calibration and validation by employing the Kennard-Stone algorithm and the optimum number of latent variables was chosen by the root mean square error of cross-validation obtained from the calibration set by internal validation (leave one out). The performance of each model was evaluated by the root mean square errors of calibration and prediction, and the results obtained indicate that Fourier transform Raman spectroscopy can be used for rapid determination of apparent amylose in starch samples with prediction errors similar to those of the standard method.