Standardization of ceruloplasmin measurements is still an issue despite the availability of a common reference material

The purpose of measurement standardization is to achieve closer comparability of results obtained using different commercial systems. Regarding serum protein immunoassays, a reference preparation (BCR-470) was released in 1993 and adopted by manufacturers across the world to value-assign their assay calibrators for routine methods to reduce method-dependent variation. Moving from nephelometric (Beckman Immage 800) to turbidimetric determination (Roche Cobas c 501) of seven serum proteins, we preliminarily checked the comparability of results between the two systems. The study was performed according to the CLSI EP9-A protocol on 30 fresh sera, tested on each system in duplicate, and subdivided on two different days, without recalibration and using manufacturers’ control materials to validate the runs. Both manufacturers’ package inserts provide statements that kit calibrators are traceable to BCR-470. Suggested reference intervals are also the same. Although a fairly good correlation was observed (r = 0.955), the comparison of ceruloplasmin methods produced evidence of highly significant proportional (regression slope, 0.572) and constant bias (intercept, 0.05 g/L). Absolute and percentage mean differences were −0.11 g/L (95% confidence interval (CI) −0.13 to −0.10 g/L) and −39.1% (CI −43.1 to −35.2%), respectively. No other evaluated proteins showed similar problems. Lacking a ceruloplasmin reference method, it is impossible to demonstrate that one of the two assays produces true ceruloplasmin values. The problem is, however, that results coming from the two assays are clearly not comparable. This may be either due to a lack of commutability of the reference material with biological samples in the evaluated assays or to calibration problems by manufacturers in one of the stages of the calibration hierarchy.     

Temporal integration of loudness measured using categorical loudness scaling and matching procedures

Temporal integration of loudness of 1 kHz tones with 5 and 200 ms durations was assessed in four subjects using two loudness measurement procedures: categorical loudness scaling (CLS) and loudness matching. CLS provides a reliable and efficient procedure for collecting data on the temporal integration of loudness and previously reported nonmonotonic behavior observed at mid-sound pressure level levels is replicated with this procedure. Stimuli that are assigned to the same category are effectively matched in loudness, allowing the measurement of temporal integration with CLS without curve-fitting, interpolation, or assumptions concerning the form of the loudness growth function.     

Characterization of polyether‐poly(methyl methacrylate)‐lithium perchlorate blend electrolytes

Solid polymer electrolyte (SPE) systems based on interpenetrating blends of poly(ethylene oxide‐co‐propylene oxide) and poly(methyl methacrylate) host matrices, with lithium perchlorate as guest salt, were prepared. These electrolytes were presented as free‐standing films, and their thermal and electrochemical properties were characterized by conductivity and electrochemical stability measurements. The properties of the interpenetrating blends of poly(ethylene oxide‐co‐propylene oxide) and poly(methyl methacrylate) host matrices as the electrolyte component of a solid‐state electrochromic device are reported and the results obtained suggest that this electrolyte provides an encouraging performance in this application. The most conducting electrolyte composition of this SPE system is the formulation designated as SPE2‐0PC (5.01 × 10^?4 S cm^?1 at about 57°C). The lowest decomposition temperature was registered with the SPE6‐15PC composition (233°C). The average transmittance in the visible region of the spectrum was above 41% for all the samples analyzed. After coloration the device assembled with 71 wt% PC presented an average transmittance of 15.71% and an optical density at 550 nm of 0.61. Copyright © 2010 John Wiley & Sons, Ltd.     

Effect of non-associated electrolyte solutions on the behaviour of poly(vinyl alcohol)-based hydrogels

The aim of this paper is to present the behaviour of the poly(vinyl alcohol) hydrogels [PVA-HG] in sodium and potassium chlorides aqueous solutions, due to their interactions. The tested [PVA-HG]-s have been obtained by repeated freezing and thawing cycles. White, heterogeneous hydrogels have been obtained. These hydrogels exhibit a mechanical active behaviour at their contact with electrolytes aqueous solutions, manifested by important changing in mass, volume and density of the hydrogel samples. These modifications could be explained by water elimination from the hydrogels that initially reached the equilibrium of swelling. The kinetic of the water desorption and the reversibility of this process, have been studied and some of the factors that influence this behaviour have been evidenced. The sensitivity of PVA hydrogels to electrolyte nature and concentration could be used in sensors design and also could explain some aspects of electrolytes diffusion through PVA membranes and targeted drugs delivery.     

Exact controllability of a spherical cap: Numerical implementation of HUM

This paper deals with the numerical implementation of the exact boundary controllability of the Reissner model for shallow spherical shells (Ref. 1). The problem is attacked by the Hilbert uniqueness method (HUM, Refs. 2–4), and we propose a semidiscrete method for the numerical approximation of the minimization problem associated to the exact controllability problem. The numerical results compare well with the results obtained by a finite difference and conjugate gradient method in Ref. 5.This work was done when the first two authors were at CNR-IAC, Rome, Italy as Graduate Students.     

Open-cyclic warfarin isomerism: 5-hydroxywarfarin

Addition of a 5-hydroxy substituent to warfarin [3-(1-phenyl-3-oxobutyl)-4-hydroxycoumarin] shifts the solution equilibrium in chloroform to favor the open isomeric form over the two cyclic diastereomeric hemiketals. X-ray diffraction analysis reveals 5-hydroxywarfarin crystallizes as the open isomer in contrast to the more than 20 warfarin and analog structures which occur ascis ortrans hemiketal forms in the solid. The two peri hydroxyl groups in the structure of 3-(1-phenyl-3-oxobutyl)-4,5-dihydroxycoumarin are intramolecularly H-bonded. Methyl kctal derivatives of 5-hydroxywarfarin and a close analog effectively model the minor cyclic hemiketal forms in solution. Structures of bothcis andtrans cyclic methyl ketals of 3-(4-oxopent-2-yl)-4,5-dihydroxy-coumarin have been determined and the aryl hydroxyls H-bond to the dihydropyranyl ring oxygens of the cyclic ketals. Nuclear magnetic resonance studies suggest that these intramolecular H-bonds persist in chloroform solution. Infrared spectroscopy on the series of compounds in KBr pellets is consistent with the crystallographically determined structures and H-bonding schemes.     

Solution-phase counterion effects in supramolecular and mechanostereochemical systems

The self-assembly of molecular components into complex superstructures involves the subtle interplay of various noncovalent forces. Charged species are often utilised in self-assembly processes as a result of the favorable π-π, cation-π, electrostatic, and hydrogen bonding interactions that form between these species. Although the counterions associated with these charged species can exert significant effects on the synthesis, stability, and operation of superstructures in solution, rarely are the counterions considered, leading to misinterpretations and misunderstandings of the studied systems. In this tutorial review, we discuss a variety of solution-phase counterion effects, from the fundamental origins to innovative ways in which these effects are exploited for useful functions.     

CCC-N-heterocyclic carbene pincer complexes: Synthesis, characterization and hydroamination activity of a hafnium complex

Our methodology for the stoichiometric preparation of CCC-NHC pincer complexes of Zr has been extended to Hf. The CCC^Bu-NHC pincer Hf complex has been characterized by X-ray crystal structure analysis. Catalytic activity in the intramolecular hydroamination/cyclization of unactivated alkenes is reported and compared to the recently reported Zr analog. An improved, scaled-up CuO-catalyzed aryl amination of 1,3-dibromobenzene and an improved salt formation methodology for preparation of bis(butyl-imidazolium)benzene are reported also.     

syn,E-1-cyclopentano-4-ethyl-3-thiosemicarbazone and syn,E-1-cyclopentano-4-phenyl-3-thiosemicarbazone

The structures of two thiosemicarbazones are described: syn,E-1-cyclopentano-4-ethyl-3-thiosemicarbazone (1) and syn,E-1-cyclopentano-4-phenyl-3-thiosemicarbazone (2). Crystal data: for 1: tetragonal, P4₃ (#78), a = b = 8.922(7) Å, c = 12.899(13) Å, and Z = 4; for 2: monoclinic a = 15.163(18) Å, b = 7.482(5) Å, c = 12.467(15) Å, = 119.04(7)°, and Z = 4. In 1, molecules are linked by hydrogen-bonding into infinite chains with non-planar 9-ring subunits in which thioamides interact with the H—N—C—N—N groups of neighbors. Thioamide groups in 2 form dimers linked by N—B···HS hydrogen-bonds with a planar 8-ring as in solid state structures of carboxylic acids. The semicarbazide syn conformation fosters formation of N—H···N intramolecular hydrogen-bonding in each structure. The solid state structures are consistent with their infrared and proton nuclear magnetic resonance spectra.     

Moment redistribution in continuous reinforced concrete beams strengthened with carbon-fiber-reinforced polymer laminates

The results of tests on continuous steel-fiber-reinforced concrete (RC) beams, with and without an external strengthening, are presented. The internal flexural steel reinforcement was designed so that to allow steel yielding before the collapse of the beams. To prevent the shear failure, steel stirrups were used. The tests also included two nonstrengthened control beams; the other specimens were strengthened with different configurations of externally bonded carbon-fiber-reinforced polymer (CFRP) laminates. In order to prevent the premature failure from delamination of the CFRP strengthening, a wrapping was also applied. The experimental results obtained show that it is possible to achieve a sufficient degree of moment redistribution if the strengthening configuration is chosen properly, confirming the results provided by two simple numerical models. Russian translation published in Mekhanika Kompozitnykh Materialov, Vol. 43, No. 5, pp. 667–686, September–October, 2007.